一种开关电源抗浪涌软启动模块的设计

Design of surge suppression soft start module for switching power supply

摘要

开关电源在接通瞬间会产生较大的浪涌电流,易发生输入熔断器烧断、合闸开关触点烧坏或整流桥过流损坏等,导致开关电源无法正常工作.针对开关电源的浪涌电流问题,设计一种抗浪涌软启动模块.该模块采用智能分段充电方式,可抑制高压输入时200A以下的瞬时冲击电流,且启动后对后续电路无影响.该设计不仅可以保证电源运行可靠、降低故障率,还可以延长电源的使用寿命,具有一定的推广价值.

Abstract

The switching power supply will produce a large surge current at the moment of connection, which is easy to cause the input fuse to burn, the closing switch contact to burn out or overcurrent damage to the rectifier, resulting in the malfunction of the power supply. To address the surge current issue in switching power supplies, a surge suppression soft start module is designed. This module adopts an intelligent segmented charging method, which can suppress instantaneous surge currents below 200A during high voltage input, without affecting subsequent circuits after startup. This design can not only ensure reliable operation and reduce failure rates of the power supply but also extend its service life, which has certain promotion value.

关键词

浪涌电流 / 软启动 / 开关电源

Key words

surge current / soft start / switching power supply

参考文献

[1] 张海燕. 开关电源的保护电路设计[J]. 重庆文理学院学报(自然科学版), 2007(5): 33-36.

[2] 吴航. 开关电源的EMI滤波器设计与实现[D]. 成都: 电子科技大学, 2016: 13-14.

[3] 边瑞. 基于瞬态器件的新型高功率电磁防护组件研究[D]. 成都: 电子科技大学, 2024: 29.

[4] 李春圃, 陈海蓉. 大功率电视机开关电源的“软”起动技术[J]. 家电检修技术, 2008(9): 4-5.

[5] 吴昊. 电源的电磁兼容研究与设计[J]. 电子质量, 2023(8): 59-63.

基金资助

2023年度辽宁省基本科研项目(JYTMS20230361)