PDF (22743K)
摘要
富铁高熵涂层由于原料成本显著低于镍基、钴基及钛基高熵合金体系,且可通过成分调控与钢铁、钛合金及铝合金等多种基体实现良好匹配,在表面防护领域展现出显著的工程应用潜力。本文系统综述了激光熔覆富铁高熵涂层的最新研究进展。首先,依据材料设计与相组成特征,将涂层划分为富铁高熵合金涂层、陶瓷增强富铁高熵复合涂层及富铁高熵非晶/纳米晶复合涂层三大体系,并阐述其组织演化规律。其次,探讨激光工艺参数对涂层微观组织与成形质量的影响机制,并梳理裂纹、气孔等典型缺陷的控制策略。进而,剖析涂层在复杂工况下的耐磨性、耐腐蚀性与抗高温氧化性能及其微观机理,并结合服役工况归纳其应用现状。最后,针对跨尺度缺陷控制、多场耦合下的性能设计及智能化制备等挑战,对未来的研究方向进行展望,以期为富铁高熵涂层的工程化应用提供理论参考。
Abstract
Iron-rich high-entropy coatings are endowed with unique engineering application potential in the field of surface protection, owing to their significantly lower raw material cost than that of Ni-based, Co-based and Ti-based high-entropy systems, and their ability to match various substrates including steel, titanium alloys and aluminum alloys through compositional tuning. The recent research progress of laser-clad iron-rich high-entropy coatings was systematically reviewed. First, according to the material design and phase composition characteristics, the coatings were classified into three major systems, namely iron-rich high-entropy alloy coatings, ceramic-reinforced iron-rich high-entropy composite coatings, and iron-rich high-entropy amorphous/nanocrystalline composite coatings, and their microstructural evolution laws were elaborated. Second, the regulation mechanisms of laser process parameters on the coating microstructure and forming quality were investigated, and the control strategies for typical defects such as cracks and pores were systematically summarized. Furthermore, the wear resistance, corrosion resistance and high-temperature oxidation resistance of the coatings under complex service conditions, as well as their underlying micro-mechanisms, were thoroughly analyzed, and their application status in various fields was summarized according to service conditions. Finally, prospects were put forward regarding the challenges of cross-scale defect control, multi-field coupling performance design and intelligent fabrication, in order to provide theoretical reference for promoting the engineering application of iron-rich high-entropy coatings.
关键词
Key words
[Author(id=1329514637331350027, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, orderNo=0, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514637390070287, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637331350027, language=EN, stringName=Guofang LUO, firstName=Guofang, middleName=null, lastName=LUO, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 State Grid Electric Power Research Institute, SMEPC , Shanghai 200437, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514637448790545, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637331350027, language=CN, stringName=骆国防, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 国网上海市电力公司 电力科学研究院 , 上海 200437, bio={"content":"骆国防 (1972—),男,重庆人,高级工程师,主要研究方向为电网设备材料检测与研究。
"}, bioImg=null, bioContent=骆国防 (1972—),男,重庆人,高级工程师,主要研究方向为电网设备材料检测与研究。
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514637184549373, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, xref=1, ext=[AuthorCompanyExt(id=1329514637201326591, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637184549373, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 State Grid Electric Power Research Institute, SMEPC , Shanghai 200437, China), AuthorCompanyExt(id=1329514637213909504, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637184549373, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 国网上海市电力公司 电力科学研究院 , 上海 200437)])]), Author(id=1329514637494927893, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, orderNo=1, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514637562036763, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637494927893, language=EN, stringName=Junxu HAN, firstName=Junxu, middleName=null, lastName=HAN, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514637608174110, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637494927893, language=CN, stringName=韩君旭, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514637255852547, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, xref=2, ext=[AuthorCompanyExt(id=1329514637272629764, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514637285212677, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002)])]), Author(id=1329514637654311460, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, orderNo=2, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514637713031719, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637654311460, language=EN, stringName=Kang YANG, firstName=Kang, middleName=null, lastName=YANG, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514637759169066, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637654311460, language=CN, stringName=杨康, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514637255852547, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, xref=2, ext=[AuthorCompanyExt(id=1329514637272629764, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514637285212677, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002)])]), Author(id=1329514637805306413, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, orderNo=3, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514637868220978, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637805306413, language=EN, stringName=Tengfei ZHANG, firstName=Tengfei, middleName=null, lastName=ZHANG, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514637914358325, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637805306413, language=CN, stringName=张腾飞, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514637255852547, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, xref=2, ext=[AuthorCompanyExt(id=1329514637272629764, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514637285212677, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002)])]), Author(id=1329514637960495673, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, orderNo=4, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514638019215933, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637960495673, language=EN, stringName=Yang YANG, firstName=Yang, middleName=null, lastName=YANG, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514638065353279, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514637960495673, language=CN, stringName=杨阳, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514637255852547, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, xref=2, ext=[AuthorCompanyExt(id=1329514637272629764, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514637285212677, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002)])]), Author(id=1329514638107296323, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, orderNo=5, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=1, authorType=1, ext={EN=AuthorExt(id=1329514638161822278, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514638107296323, language=EN, stringName=Shihong ZHANG, firstName=Shihong, middleName=null, lastName=ZHANG, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514638216348232, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, authorId=1329514638107296323, language=CN, stringName=张世宏, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514637255852547, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, xref=2, ext=[AuthorCompanyExt(id=1329514637272629764, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514637285212677, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505213275054951, companyId=1329514637255852547, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 安徽工业大学 先进金属材料绿色制备与表面技术教育部重点实验室 , 安徽 马鞍山 243002)])])]
骆国防,韩君旭,杨康,张腾飞,杨阳,张世宏.
激光熔覆富铁高熵涂层研究进展[J].
安徽工业大学学报(自然科学版), 2026, 43(5): 497-510, 550 DOI:10.12415/j.issn.1671−7872.26083
| [1] |
YEH J W, CHEN S K, LIN S J, et al. Nanostructured high— entropy alloys with multiple principal elements: novel alloy design concepts and outcomes[J]. Advanced Engineering Materials, 2004, 6(5): 299-303.
|
| [2] |
GUO S, LIU C T. Phase stability in high entropy alloys: formation of solid—solution phase or amorphous phase[J]. Progress in Natural Science: Materials International, 2011, 21(6): 433-446.
|
| [3] |
ZHANG S, WU C L, ZHANG C H, et al. Laser surface alloying of FeCoCrAlNi high—entropy alloy on 304 stainless steel to enhance corrosion and cavitation erosion resistance[J]. Optics & Laser Technology, 2016, 84: 23-31.
|
| [4] |
LIANG H, MIAO J W, GAO B Y, et al. Microstructure and tribological properties of AlCrFe2Ni2W0.2Mo0.75 high—entropy alloy coating prepared by laser cladding in seawater, NaCl solution and deionized water[J]. Surface and Coatings Technology, 2020, 400: 126214.
|
| [5] |
LIU J, LIU H, CHEN P J, et al. Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high—entropy alloy coatings fabricated by laser cladding[J]. Surface and Coatings Technology, 2019, 361: 63-74.
|
| [6] |
SUN D, CAI Y C, ZHU L S, et al. High—temperature oxidation and wear properties of TiC—reinforced CrMnFeCoNi high entropy alloy composite coatings produced by laser cladding[J]. Surface and Coatings Technology, 2022, 438: 128407.
|
| [7] |
王月祥, 潘雄飞, 沈晓辉, 等. 激光熔覆 Stellite6—60WC 复合涂层工艺及高温耐磨性[J]. 安徽工业大学学报 (自然科学版), 2023, 40(4): 394-400.
|
| [8] |
WANG Y X, PAN X F, SHEN X H, et al. Laser Cladding stellite6—60WC composite coating process and high— temperature wear resistance[J]. Journal of Anhui University of Technology(Natural Science), 2023, 40(4): 394-400.
|
| [9] |
潘雄飞, 王月祥, 梁怡航, 等. Mo 含量对自熔性铁基合金组织性能的影响[J]. 安徽工业大学学报 (自然科学版), 2024, 41(1): 37-45.
|
| [10] |
PAN X F, WANG Y X, LIANG Y H, et al. Effect of Mo content on microstructure and properties of self—fusible iron base alloys[J]. Journal of Anhui University of Technology(Natural Science), 2024, 41(1): 37-45.
|
| [11] |
LIU N, WU P H, ZHOU P J, et al. Rapid solidification and liquid—phase separation of undercooled CoCrCuFexNi high— entropy alloys[J]. Intermetallics, 2016, 72: 44-52.
|
| [12] |
LIU Y N, DING Y, YANG L J, et al. Research and progress of laser cladding on engineering alloys: a review[J]. Journal of Manufacturing Processes, 2021, 66: 341.
|
| [13] |
张津超, 石世宏, 龚燕琪, 等. 激光熔覆技术研究进展[J]. 表面技术, 2020, 49(10): 1-11.
|
| [14] |
ZHANG J C, SHI S H, GONG Y Q, et al. Research progress of laser cladding technology[J]. Surface Technology, 2020, 49(10): 1-11.
|
| [15] |
ZHU L D, XUE P S, LAN Q, et al. Recent research and development status of laser cladding: a review[J]. Optics & Laser Technology, 2021, 138: 106915.
|
| [16] |
张世宏, 门尚武, 吴旺朋, 等. 轻合金表面技术在武器装备轻量化领域的研究现状与展望[J]. 安徽工业大学学报 (自然科学版), 2023, 40(3): 237-249.
|
| [17] |
ZHANG S H, MEN S W, WU W P, et al. Research status and prospect of light alloy and surface technology in the field of weaponry light—weight[J]. Journal of Anhui University of Technology(Natural Science), 2023, 40(3): 237-249.
|
| [18] |
LI K Q, LI T, MA M, et al. Laser cladding state recognition and crack defect diagnosis by acoustic emission signal and neural network[J]. Optics & Laser Technology, 2021, 142: 107161.
|
| [19] |
黄留飞, 孙耀宁, 王国建. 激光熔覆技术制备高熵合金涂层研究进展[J]. 激光与光电子学进展, 2019, 56(24): 240003
|
| [20] |
HUANG L F, SUN Y N, WANG G J, et al. Research progress of laser cladding high—entropy alloy coating, 2019, 56(24): 240003.
|
| [21] |
高绪杰, 郭娜娜, 朱光明, 等. 激光熔覆制备高熵合金涂层的研究进展[J]. 表面技术, 2019, 48(6): 107-117.
|
| [22] |
GAO X J, GUO N N, ZHU G M, et al. Research status of high—entropy alloys coating prepared by laser cladding[J]. Surface Technology, 2019, 48(6): 107-117.
|
| [23] |
MOHANTY A, SAMPREETH J, BEMBALGE O, et al. High temperature oxidation study of direct laser deposited AlxCoCrFeNi (x=0.3, 0.7) high entropy alloys[J]. Surface and Coatings Technology, 2019, 380: 125028.
|
| [24] |
ZHU J, LU K, HUI X, et al. Roles of Al on microstructures, mechanical properties and oxidation resistances of FCC AlxCoCrNiFe high entropy alloy coatings prepared by laser directed energy deposition[J]. Materials Science and Engineering A, 2025, 922: 147626.
|
| [25] |
LI M, GAZQUEZ J, BORISEVICH A, et al. Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high— throughput laser deposition method[J]. Intermetallics, 2018, 95: 110-118.
|
| [26] |
YANG C M, LIU X B, ZHU Z X, et al. Study of tribological property of laser—cladded FeCoCrNiMnx high—entropy alloy coatings via experiment and molecular dynamics simulation[J]. Tribology International, 2024, 191: 109106.
|
| [27] |
DU J L, XU X, ZHANG H M, et al. Microstructure and wear resistance of CoCrFeNiMn coatings prepared by extreme—high—speed laser cladding[J]. Surface and Coatings Technology, 2023, 470: 129821.
|
| [28] |
YE Q, FENG K, LI Z, et al. Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating[J]. Applied Surface Science, 2017, 396: 1420-1426.
|
| [29] |
LIU H, LI D, CHEN P, et al. Investigation of the tribological properties of CoCrFeNiTix high—entropy alloys coatings prepared by laser cladding based on molecular dynamics simulation and tribological experiments[J]. Tribology International, 2026, 215: 111428.
|
| [30] |
CAO S, XIAO H, QIN X, et al. Laser cladding and characterization of FeCoCrNi—based HEA coatings with BCC/L21 coherent strengthening[J]. Materials Characterization, 2025, 225: 115157.
|
| [31] |
WANG X, LIU Q, HUANG Y, et al. Effect of Ti Content on the microstructure and corrosion resistance of CoCrFeNiTix high entropy alloys prepared by laser cladding[J]. Materials, 2020, 13(10): 2209.
|
| [32] |
ZHANG B, MU W, CAI Y. Design, formability, and strengthening mechanism of CoCrFeNiTix high—entropy alloys fabricated using laser directed energy deposition[J]. Intermetallics, 2025, 181: 108725.
|
| [33] |
JIN J, CHEN B, ZHANG Z, et al. Effects of Mo content on the microstructure and mechanical properties of laser cladded FeCoCrNiMox (x=0.2, 0.5) high—entropy alloy coatings[J]. Surface and Coatings Technology, 2024, 482: 130697.
|
| [34] |
LI K Y, LIANG J, ZHOU J S. Microstructure and elevated temperature tribological performance of the CoCrFeNiMo high entropy alloy coatings[J]. Surface and Coatings Technology, 2022, 449: 128978.
|
| [35] |
ZHANG T F, CHEN Y H, HAN J X, et al. The role of molybdenum in regulating passivation stability and tribocorrosion resistance of laser—clad FeCoCrNiMoₓ high— entropy alloy coatings[J]. Corrosion Science, 2026, 264: 113734.
|
| [36] |
WANG W, XIAO F, WANG D, et al. Microstructural regulation and crack suppression mechanisms of AlCoCrFeNiCux high entropy alloy coatings by resistance seam welding assisted electron beam cladding[J]. Journal of Alloys and Compounds, 2025, 1036: 181840.
|
| [37] |
SU J, LI A, RUAN Y, et al. Repair of tungsten heavy alloy die casting molds with laser cladded CoCrFeNiWx high entropy alloy Coatings: microstructure, wear properties and tempering stability[J]. Engineering Failure Analysis, 2024, 161: 108291.
|
| [38] |
WEN X, CUI X F, JIN G, et al. Novel nano—lamellar AlCoCrFeMn0.5Mo0.1Nbx eutectic high—entropy alloy coatings by ultrasonic assisted laser cladding: microstructure and tribological behaviors[J]. Intermetallics, 2023, 156: 107851.
|
| [39] |
WU H, WANG L, ZHANG S, et al. Tribological properties and sulfuric acid corrosion resistance of laser clad CoCrFeNi high entropy alloy coatings with different types of TiC reinforcement[J]. Tribology International, 2023, 188: 108870.
|
| [40] |
GAO Z M, NIU Z M, GAO Z T, et al. Microstructure and wear behavior of in—situ synthesized TiC—reinforced CoCrFeNi high entropy alloy prepared by laser cladding[J]. Applied Surface Science, 2024, 670: 160720.
|
| [41] |
ZHENG K X, WU C L, LIU J L, et al. Effect of TiC ceramic particles size on microstructure and tribo—corrosion behavior of FeCoCrNiTi high—entropy alloy coatings by laser cladding[J]. Surface and Coatings Technology, 2025, 515: 132638.
|
| [42] |
ZHANG Z Q, QI C Y, SI C R, et al. Interfacial phase evolution and mechanical behavior of WC—reinforced CoCrFeNiMn high entropy alloy coatings fabricated by laser metal deposition[J]. Surface and Coatings Technology, 2025, 513: 132543.
|
| [43] |
ZHANG Z Q, LI H J, SI C R, et al. Microstructure and wear behavior of (CoCrFeNiMn)1−x/(WC)x composite coatings fabricated by directed energy deposition[J]. Wear, 2025, 578/579: 206205.
|
| [44] |
LIANG H, HOU J X, LI X C, et al. Micro—structures and dry sliding wear properties of novel AlCrFeNiMo0.5−x(WC) high entropy alloy—ceramic composite coatings[J]. Intermetallics, 2024, 170: 108328.
|
| [45] |
ZHANG H R, GAO Y, YONG Y W, et al. Influence of SiC particle size on microstructure evolution and tribological behavior of CoCrFeNiAl coatings prepared by laser cladding[J]. Journal of Materials Research and Technology, 2025, 39: 6647-6665.
|
| [46] |
LIU X Y, CHEN Z B, LIU Y L, et al. Enhanced wear resistance of laser cladding Al0.5CoCrFeNi coating via in— situ reaction synthesis between Ti and B4C particles[J]. Journal of Alloys and Compounds, 2025, 1031: 180965.
|
| [47] |
LI X F, FENG Y H, LIU B, et al. Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high—entropy alloy coatings prepared by laser cladding[J]. Journal of Alloys and Compounds, 2019, 788: 485-494.
|
| [48] |
SUN D, ZHU L S, CAI Y C, et al. Tribology comparison of laser—cladded CrMnFeCoNi coatings reinforced by three types of ceramic (TiC/NbC/B4C)[J]. Surface and Coatings Technology, 2022, 450: 129013.
|
| [49] |
ZHAO W, SONG C X, WANG L, et al. Microstructure and properties of in—situ TiN—reinforced AlxCoCrFeNiTi high— entropy alloy laser cladding layers[J]. Surface and Coatings Technology, 2025, 518: 132881.
|
| [50] |
LIU S S, ZHANG M, ZHAO G L, et al. Microstructure and properties of ceramic particle reinforced FeCoNiCrMnTi high entropy alloy laser cladding coating[J]. Intermetallics, 2022, 140: 107402.
|
| [51] |
ZHAO Y T, LI Y, GUO J L, et al. Role of Y2O3 nanoparticles in improving microstructure and cyclic oxidation resistance of AlCoCrFeNi—based high entropy alloy coating[J]. Surface and Coatings Technology, 2026, 526: 133343.
|
| [52] |
LI S D, LIU D F, LIU G, et al. Study on the preparation of CeO2—doped AlCoCrFeNiTi high entropy alloy bioinert coatings by laser cladding: The effect of CeO2 particle size on the tribological properties of the coatings[J]. Surface and Coatings Technology, 2023, 475: 130155.
|
| [53] |
CUI C, WU M P, MIAO X J, et al. Microstructure and corrosion behavior of CeO2/FeCoNiCrMo high—entropy alloy coating prepared by laser cladding[J]. Journal of Alloys and Compounds, 2022, 890: 161826.
|
| [54] |
LI Z Y, CHEN W G, LI D Y, et al. Frictional wear properties of different nano La2O3 composite FeCoNiCrMo high—entropy alloy coatings under soil conditions[J]. Journal of Materials Research and Technology, 2025, 35: 6874-6888.
|
| [55] |
CHEN H, CUI H Z, JIANG D, et al. Formation and beneficial effects of the amorphous/nanocrystalline phase in laser remelted (FeCoCrNi)75Nb10B8Si7 high—entropy alloy coatings fabricated by plasma cladding[J]. Journal of Alloys and Compounds, 2022, 899: 163277.
|
| [56] |
SHU F Y, LIU S, ZHAO H Y, et al. Structure and high— temperature property of amorphous composite coating synthesized by laser cladding FeCrCoNiSiB high—entropy alloy powder[J]. Journal of Alloys and Compounds, 2018, 731: 662-666.
|
| [57] |
SHU F Y, YANG B , DONG S Y, et al. Effects of Fe— to— Co ratio on microstructure and mechanical properties of laser cladded FeCoCrBNiSi high—entropy alloy coatings[J]. Applied Surface Science, 2018, 450: 538-544.
|
| [58] |
CHENG J B, SUN B, GE Y Y, et al. Nb doping in laser— cladded Fe25Co25Ni25(B0.7Si0.3)25 high entropy alloy coatings: Microstructure evolution and wear behavior[J]. Surface and Coatings Technology, 2020, 402: 126321.
|
| [59] |
ZHENG K X, YU D T, LIU J L, et al. Laser cladding of FeCoCrNiTi high—entropy alloy coatings to modulate the microstructure and enhance the tribo—corrosion behavior on 304 stainless steel[J]. Surface and Coatings Technology, 2025, 505: 132114.
|
| [60] |
ZHANG Q, WANG Q, HAN B, et al. Comparative studies on microstructure and properties of CoCrFeMnNi high entropy alloy coatings fabricated by high—speed laser cladding and normal laser cladding[J]. Journal of Alloys and Compounds, 2023, 947: 169517.
|
| [61] |
WANG W J, ZHENG Y F, ZHENG W J, et al. Dilution induced variation of microstructure and mechanical properties on Co−Cr−Fe−Ni high entropy alloy coatings prepared by laser cladding[J]. Surface and Coatings Technology, 2024, 493(P2): 131256.
|
| [62] |
FENG L T, JIN G, CUI X F, et al. Optimizing laser cladding process parameters for transformation—induced plasticity FeMnCoCr high entropy alloy: a multi—objective approach[J]. Surface and Coatings Technology, 2025, 495: 131536.
|
| [63] |
DU C C, HU L, REN X D, et al. Cracking mechanism of brittle FeCoNiCrAl HEA coating using extreme high—speed laser cladding[J]. Surface and Coatings Technology, 2021, 424: 127617.
|
| [64] |
GAO Z N, WANG L L, WANG Y N, et al. Crack defects and formation mechanism of FeCoCrNi high entropy alloy coating on TC4 titanium alloy prepared by laser cladding[J]. Journal of Alloys and Compounds, 2022, 903: 163905.
|
| [65] |
GU B P, ZHANG H X, WANG Y S, et al. Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating by temperature field—assisted laser cladding[J]. Surface and Coatings Technology, 2024, 494(P2): 131473.
|
| [66] |
HU Y, WANG L, YAO J H, et al. Effects of electromagnetic compound field on the escape behavior of pores in molten pool during laser cladding[J]. Surface and Coatings Technology, 2020, 383: 125198.
|
| [67] |
LIANG G, JIN G, CUI X F, et al. The directional array TiN— reinforced AlCoCrFeNiTi high—entropy alloy synthesized in situ via magnetic field—assisted laser cladding[J]. Applied Surface Science, 2022, 572: 151407.
|
| [68] |
ZHANG S Y, HAN B, LI M Y, et al. Investigation on microstructure and properties of laser cladded AlCoCrCuFeNi high entropy alloy coating by ultrasonic impact treatment[J]. Intermetallics, 2021, 128: 107017.
|
| [69] |
ZHANG M N, WANG Y S, WANG D F, et al. Grain refinement and mechanical properties improvement of AlCuFeCoNi high—entropy alloy coatings fabricated by resonant ultrasonic assisted laser cladding[J]. Optics & Laser Technology, 2025, 182(PB): 112233.
|
| [70] |
ZHANG H X, MENG X, GU B P, et al. Effect of simultaneous ultrasonic vibration assistance on the microstructure and high temperature wear performance of laser clad AlCoCrFeNi high entropy alloy[J]. Tribology International, 2026, 221: 111915.
|
| [71] |
GUO Y F, YANG F, LU B W, et al. Competitive relationship between the FCC+BCC dual phases in the wear mechanism of laser cladding FeCoCrNiAl0.5Ti0.5 HEAs coating[J]. Surface and Coatings Technology, 2024, 493: 131315.
|
| [72] |
WU T, YANG C, YU L T, et al. Microstructure characterization and high—temperature wear mechanism of high—entropy alloy matrix composite coating fabricated by laser cladding[J]. Applied Surface Science, 2024, 677: 161032.
|
| [73] |
ZHANG L, ZHANG H B, CAO H Z, et al. Enhanced tribocorrosion performance of laser—deposited Fe2CoNiCrAlTiCx high—entropy alloy coatings via in—situ graphitization in aqueous medium[J]. Corrosion Science, 2024, 236: 112221.
|
| [74] |
JIN G, CAI Z B, GUAN Y J, et al. High temperature wear performance of laser—cladded FeNiCoAlCu high—entropy alloy coating[J]. Applied Surface Science, 2018, 445: 113-122.
|
| [75] |
LI Y Z, SHI Y. Microhardness, wear resistance, and corrosion resistance of AlxCrFeCoNiCu high—entropy alloy coatings on aluminum by laser cladding[J]. Optics & Laser Technology, 2021, 134: 106632.
|
| [76] |
ZHOU Y W, BI J, LIU D H, et al. High—temperature wear behavior and mechanical properties of laser—clad AlCoCrFeNi HEA coatings on H13 steel co—strengthened by B4C/Y2O3[J]. Wear, 2026, 587: 206481.
|
| [77] |
MA Q, LU B W, ZHANG Y M, et al. Crack—free 60wt% WC reinforced FeCoNiCr high—entropy alloy composite coating fabricated by laser cladding[J]. Materials Letters, 2022, 324: 132667.
|
| [78] |
CHENG W, ZHOU Y, LIU X B, et al. Microstructural regulation and property enhancement mechanisms of laser cladding FeCoCrNiCu HEA via Ti/Al lightweight element[J]. Tribology International, 2026, 217: 111629.
|
| [79] |
GUO Y F, ZHU J Q, CAO J J, et al. Pitting corrosion mechanism of BCC+FCC dual—phase structured laser cladding FeCoCrNiAl0.5Ti0.5 HEAs coating[J]. Journal of Alloys and Compounds, 2024, 980: 173643.
|
| [80] |
ZHANG C L, HUANG L F, LI S X, et al. Improved corrosion resistance of laser melting deposited CoCrFeNi— series high—entropy alloys by Al addition[J]. Corrosion Science, 2023, 225: 111599.
|
| [81] |
WANG J K, CHEN Y S, ZHANG Y H, et al. Microstructure evolution and acid corrosion behavior of CoCrFeNiCu1− xMo x high—entropy alloy coatings fabricated by coaxial direct laser deposition[J]. Corrosion Science, 2022, 198: 110108.
|
| [82] |
LI J L, SU Y, LI J, et al. Microstructure and corrosive—wear properties of CoCrFeNiZrx high entropy alloy coating fabricated on Ti6Al4V by laser cladding[J]. Journal of Alloys and Compounds, 2025, 1010: 177932.
|
| [83] |
CHEN G D, ZHAO H L, ZHU J P, et al. B induces Cr grain boundary enrichment and the enhanced anti—tribocorrosion property of HEA composite coatings[J]. Surface and Coatings Technology, 2025, 504: 132064.
|
| [84] |
ZHAO Y Y, MIAO Y G, LIU J, et al. Enhanced wear and corrosion resistance via laser cladding of a NiAl—CoCrFeW high—entropy alloy coating on NAB substrate[J]. Surface and Coatings Technology, 2026, 526: 133337.
|
| [85] |
HE M Y, KANG H J, LIN S Y, et al. Impressive high— temperature oxidation resistance of FeCrNiMnAl high entropy alloy coating on the ferritic/martensitic steel with primordial Al2O3 and Mn3O4 gradient films[J]. Journal of Alloys and Compounds, 2022, 928: 167109.
|
| [86] |
LIU K C, BI Z J, LOU L Y, et al. High temperature oxidation behavior of Hf/Zr/Y co—doped CoAlNiCrFe high entropy coatings fabricated by high—speed laser cladding[J]. Corrosion Science, 2025, 244: 112626.
|
| [87] |
YANG C, LIU H X, LIU Y X, et al. Wear and high— temperature oxidation resistance of (AlCrFeTiV)100−xNix high— entropy alloy coatings prepared by laser cladding on Ti6Al4V alloy[J]. Surface and Coatings Technology, 2024, 489: 131147.
|
| [88] |
XIE F, ZHAI C S, ZHANG X, et al. Enhanced high— temperature oxidation resistance of TC11 titanium alloys via laser cladding FeCoNiCrMoBSi high—entropy alloy coatings[J]. Materials Chemistry and Physics, 2025, 340: 130861.
|
| [89] |
ZENG X, LIU Z Y, WU G G, et al. Microstructure and high— temperature properties of laser cladded AlCoCrFeNiTi0.5 high—entropy coating on Ti 6Al—4V alloy[J]. Surface and Coatings Technology, 2021, 418: 127243.
|
| [90] |
ZHANG G S, ZHANG Z J, XUAN J Y, et al. The elevated temperature oxidation and wear behavior of Fe20Co20Ni20Cr8Mo12B10Si10 high—entropy alloy coating by laser cladding[J]. Journal of Materials Research and Technology, 2024, 29: 4216-4231.
|
基金资助
安徽省杰出青年基金项目(2408085JX008)