PDF (17955K)
摘要
高熵设计为提升航空发动机热端部件用热/环境障涂层 (T/EBC) 的综合性能提供了有效策略。本研究采用固相反应法制备了 γ−Er2Si2O7 和高熵稀土二硅酸盐陶瓷 γ−(Ho0.2Er0.2Tm0.2Y0.2Yb0.2)2Si2O7,综合运用 X 射线衍射 (XRD)、Rietveld 精修、扫描电子显微镜 (SEM)、透射电子显微镜 (TEM)、激光闪射分析仪及高温烧结实验等手段,系统研究其物相组成、微观结构、力学性能、热物理行为及在 1 300~1 500 ℃范围内的长期高温稳定性。结果表明:所制备的 γ−(Ho0.2Er0.2Tm0.2Y0.2Yb0.2)2Si2O7 高熵陶瓷材料具有单一均匀的 γ 相结构。相较于 Er2Si2O7,该高熵陶瓷表现出更低的孔隙率、更高的维氏硬度、更优异的断裂韧性及更低的热导率,其在 1 000,1 500 ℃下的热导率分别为 0.933,1.640 W•m−1•K−1。经 1 300,1 500 ℃不同时长烧结处理后,该材料晶粒尺寸生长速率较低,展现出良好的抗高温烧结性能。构型熵、晶格畸变与迟滞扩散的协同作用共同改善了 γ−(Ho0.2Er0.2Tm0.2Y0.2Yb0.2)2Si2O7 的致密化程度、力学可靠性、隔热能力及抗烧结能力。本研究揭示了该高熵稀土二硅酸盐内在的结构−性能关系,表明其是先进 T/EBC 材料领域极具应用前景的候选材料。
Abstract
High-entropy design provides an effective strategy for enhancing the comprehensive performance of thermal/environmental barrier coatings (T/EBCs) for hot-section components of aero-engines. In this study, γ−Er2Si2O7 and the high-entropy rare-earth disilicate ceramic γ−(Ho0.2Er0.2Tm0.2Y0.2Yb0.2)2Si2O7 were synthesized via a solid-state reaction method. Their phase composition, microstructure, mechanical properties, thermophysical behavior, and long-term high-temperature stability at 1 300–1 500 ℃ were systematically investigated using X ray diffraction (XRD), Rietveld refinement, scanning electron microscopy (SEM), transmission electron microscopy (TEM), laser flash analysis, and high-temperature sintering tests.The results indicate that the as-prepared γ−(Ho0.2Er0.2Tm0.2Y0.2Yb0.2)2Si2O7 high-entropy ceramic possesses a homogeneous single-phase γ structure. Compared with Er2Si2O7, the high-entropy ceramic exhibits lower porosity, higher Vickers hardness, superior fracture toughness, and lower thermal conductivity. Thermal conductivity values of γ−(Ho0.2Er0.2Tm0.2Y0.2Yb0.2)2Si2O7 are 0.933 W•m−1•K−1 at 1 000 ℃ and 1.640 W•m−1•K−1 at 1 500 ℃, respectively. After sintering at 1 300 ℃ and 1 500 ℃ for different durations, γ−(Ho0.2Er0.2Tm0.2Y0.2Yb0.2)2Si2O7 exhibits a low grain-growth rate, demonstrating excellent resistance to high-temperature sintering. The synergistic effects of configurational entropy, lattice distortion, and sluggish diffusion contribute to the enhanced densification, mechanical reliability, thermal-insulation capability, and sintering resistance of γ−(Ho0.2Er0.2Tm0.2Y0.2Yb0.2)2Si2O7. These results elucidate the intrinsic structure–property relationships of the high-entropy rare-earth disilicate γ−(Ho0.2Er0.2Tm0.2Y0.2Yb0.2)2Si2O7 and demonstrate its potential as a highly promising candidate material for advanced T/EBC applications.
关键词
Key words
[Author(id=1329514635330683045, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, orderNo=0, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514635393597607, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635330683045, language=EN, stringName=Zihao ZHU, firstName=Zihao, middleName=null, lastName=ZHU, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514635443929256, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635330683045, language=CN, stringName=朱子豪, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002, bio={"content":"朱子豪 (2001—),男,安徽安庆人,硕士生,主要研究方向为高熵陶瓷材料及高温防护涂层。
"}, bioImg=null, bioContent=朱子豪 (2001—),男,安徽安庆人,硕士生,主要研究方向为高熵陶瓷材料及高温防护涂层。
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514635171299486, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, xref=1, ext=[AuthorCompanyExt(id=1329514635188076703, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514635204853920, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002)])]), Author(id=1329514635490066602, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, orderNo=1, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514635552981164, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635490066602, language=EN, stringName=Liuyang MA, firstName=Liuyang, middleName=null, lastName=MA, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514635603312813, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635490066602, language=CN, stringName=马留洋, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514635171299486, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, xref=1, ext=[AuthorCompanyExt(id=1329514635188076703, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514635204853920, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002)])]), Author(id=1329514635653644463, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, orderNo=2, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514635716559025, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635653644463, language=EN, stringName=Shuai YUAN, firstName=Shuai, middleName=null, lastName=YUAN, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514635766890674, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635653644463, language=CN, stringName=袁帅, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514635171299486, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, xref=1, ext=[AuthorCompanyExt(id=1329514635188076703, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514635204853920, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002)])]), Author(id=1329514635813028020, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, orderNo=3, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=1, authorType=1, ext={EN=AuthorExt(id=1329514635875942582, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635813028020, language=EN, stringName=Zhenya ZHANG, firstName=Zhenya, middleName=null, lastName=ZHANG, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514635926274231, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635813028020, language=CN, stringName=张振亚, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002, bio={"content":"张振亚 博士,副教授,教育部海外引进高层次人才,ISO TC107 注册专家。长期从 事极端苛刻环境中金属/陶瓷基表面与界面科学、高温防护涂层体系设计制备与服 役性能评价研究。主持/参与国家重点研发计划、国家自然科学基金及 GF 项目等国 家级/省部级课题多项。以第一/通信作者在 Corrosion Science 等期刊发表论文 30 余 篇,申请专利近 10 项。获省科学技术奖、中国表面工程协会技术发明奖及华电集团 科技奖励等,兼具学术前沿探索与工程应用转化能力。
"}, bioImg=null, bioContent=张振亚 博士,副教授,教育部海外引进高层次人才,ISO TC107 注册专家。长期从 事极端苛刻环境中金属/陶瓷基表面与界面科学、高温防护涂层体系设计制备与服 役性能评价研究。主持/参与国家重点研发计划、国家自然科学基金及 GF 项目等国 家级/省部级课题多项。以第一/通信作者在 Corrosion Science 等期刊发表论文 30 余 篇,申请专利近 10 项。获省科学技术奖、中国表面工程协会技术发明奖及华电集团 科技奖励等,兼具学术前沿探索与工程应用转化能力。
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514635171299486, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, xref=1, ext=[AuthorCompanyExt(id=1329514635188076703, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514635204853920, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002)])]), Author(id=1329514635976605881, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, orderNo=4, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514636039520444, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635976605881, language=EN, stringName=Sunghun LEE, firstName=Sunghun, middleName=null, lastName=LEE, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 Department of Extreme Environmental Coatings, Korea Extreme Materials Research Institute , Changwon, Gyeongnam, 51508, Republic of Korea, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514636085657789, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514635976605881, language=CN, stringName=Lee Sunghun, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 韩国材料科学研究院 极端材料研究所 , 韩国 昌原市 51508, bio={"content":"Lee Sunghun 博士,韩国材料科学研究院 (KIMS) 极端材料研究所极端环境涂层团 队首席研究员。主要研究方向为极端温度环境下的表面工程,涵盖先进陶瓷涂层与 金属涂层的设计、涂层高温氧化行为、热流体仿真及耐等离子体刻蚀涂层等领域。 其为韩国航空航天级热防护技术 (含热防护系统 TPS、热障涂层 TBC、热管理涂层 TMC) 实现自主化作出了重要贡献。其精通物理气相沉积 (PVD)、热喷涂、电子束− 物理气相沉积 (EB−PVD) 等厚膜制备工艺,现任韩国热喷涂协会 (KTSA) 副会长, 并在韩国材料科学研究院极端材料表征综合研究平台建设工作中承担核心职责。
"}, bioImg=null, bioContent=Lee Sunghun 博士,韩国材料科学研究院 (KIMS) 极端材料研究所极端环境涂层团 队首席研究员。主要研究方向为极端温度环境下的表面工程,涵盖先进陶瓷涂层与 金属涂层的设计、涂层高温氧化行为、热流体仿真及耐等离子体刻蚀涂层等领域。 其为韩国航空航天级热防护技术 (含热防护系统 TPS、热障涂层 TBC、热管理涂层 TMC) 实现自主化作出了重要贡献。其精通物理气相沉积 (PVD)、热喷涂、电子束− 物理气相沉积 (EB−PVD) 等厚膜制备工艺,现任韩国热喷涂协会 (KTSA) 副会长, 并在韩国材料科学研究院极端材料表征综合研究平台建设工作中承担核心职责。
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514635250991265, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, xref=2, ext=[AuthorCompanyExt(id=1329514635267768482, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635250991265, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 Department of Extreme Environmental Coatings, Korea Extreme Materials Research Institute , Changwon, Gyeongnam, 51508, Republic of Korea), AuthorCompanyExt(id=1329514635280351395, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635250991265, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 韩国材料科学研究院 极端材料研究所 , 韩国 昌原市 51508)])]), Author(id=1329514636135989439, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, orderNo=5, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1329514636198904001, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514636135989439, language=EN, stringName=Shihong ZHANG, firstName=Shihong, middleName=null, lastName=ZHANG, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1329514636249235650, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, authorId=1329514636135989439, language=CN, stringName=张世宏, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1329514635171299486, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, xref=1, ext=[AuthorCompanyExt(id=1329514635188076703, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Anhui University of Technology , Maanshan 243002, China), AuthorCompanyExt(id=1329514635204853920, tenantId=1045748351789510663, journalId=1155139928303341741, articleId=1329505212034257688, companyId=1329514635171299486, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 安徽工业大学 先进金属材料绿色制造与表面技术重点实验室 , 安徽 马鞍山 243002)])])]
朱子豪,马留洋,袁帅,张振亚,Lee Sunghun,张世宏.
γ−(5RE
0.2)
2Si
2O
7 高熵稀土硅酸盐热/环境障涂层材料的热力学性能[J].
安徽工业大学学报(自然科学版), 2026, 43(5): 589-600 DOI:10.12415/j.issn.1671−7872.26131
| [1] |
LEE K N. Current status of environmental barrier coatings for Si—based ceramics[J]. Surface and Coatings Technology, 2000, 133/134: 1-7.
|
| [2] |
TEJERO−MARTIN D, BENNETT C, HUSSAIN T. A review on environmental barrier coatings: history, current state of the art and future developments[J]. Journal of the European Ceramic Society, 2021, 41(3): 1747-1768.
|
| [3] |
LEE K N, FOX D S, BANSAL N P. Rare earth silicate environmental barrier coatings for SiC/SiC composites and Si3N4 ceramics[J]. Journal of the European Ceramic Society, 2005, 25(10): 1705-1715.
|
| [4] |
RICHARDS B T, YOUNG K A, FRANCQUEVILLE D F, et al. Response of ytterbium disilicate—silicon environmental barrier coatings to thermal cycling in water vapor[J]. Acta Materialia, 2016, 106: 1-14.
|
| [5] |
HARDER B J, STOKES J L, KOWALSKI B A, et al. Steam oxidation performance of Yb2Si2O7 environmental barrier coatings exposed to CMAS[J]. Journal of the European Ceramic Society, 2024, 44(4): 2486-2498.
|
| [6] |
ZHANG Z Y, XUE Z L, WANG H H, et al. Corrosion behavior of YxYb(2−x)Si2O7 environmental barrier coating materials against molten calcium—magnesium—aluminosilicate (CMAS) at 1 475 ℃[J]. Corrosion Science, 2024, 227: 111770.
|
| [7] |
TURCER L R, KRAUSE A R, GARCES H F, et al. Environmental—barrier coating ceramics for resistance against attack by molten calcia—magnesia—aluminosilicate (CMAS) glass: part I, YAlO3 and γ−Y2Si2O7[J]. Journal of the European Ceramic Society, 2018, 38(11): 3905-3913.
|
| [8] |
TOHER C, RIDLEY M J, TOMKO K Q, et al. Design rules for the thermal and elastic properties of rare—earth disilicates[J]. Materialia, 2023, 28: 101729.
|
| [9] |
FUJII S, IOKI A, YOKOI T, et al. Role of phonons on phase stabilization of RE2Si2O7 over wide temperature range (RE = Yb, Gd)[J]. Journal of the European Ceramic Society, 2020, 40(3): 780-788.
|
| [10] |
TIAN Z L, REN X M, LEI Y M, et al. Corrosion of RE2Si2O7 (RE=Y, Yb, and Lu) environmental barrier coating materials by molten calcium—magnesium—alumino—silicate glass at high temperatures[J]. Journal of the European Ceramic Society, 2019, 39(14): 4245-4254.
|
| [11] |
MAIER N, RIXECKER G, NICKEL K G. Formation and stability of Gd, Y, Yb and Lu disilicates and their solid solutions[J]. Journal of Solid State Chemistry, 2006, 179(6): 1630-1635.
|
| [12] |
STOKES J L, HARDER B J, WIESNER V L, et al. Crystal structures and thermal expansion of Yb2Si2O7−Gd2Si2O7 solid solutions[J]. Journal of Solid State Chemistry, 2022, 312: 123166.
|
| [13] |
ESCUDERO A, ALBA M D, BECERRO A I. Polymorphism in the Sc2Si2O7−Y2Si2O7 system[J]. Journal of Solid State Chemistry, 2007, 180(4): 1436-1445.
|
| [14] |
LUO Y X, SUN L C, WANG J M, et al. Material—genome perspective towards tunable thermal expansion of rare—earth di—silicates[J]. Journal of the European Ceramic Society, 2018, 38(10): 3547-3554.
|
| [15] |
GUO X T, ZHANG Y L, LI T, et al. High—entropy rare—earth disilicate (Lu0.2Yb0.2Er0.2Tm0.2Sc0.2)2Si2O7: a potential environmental barrier coating material[J]. Journal of the European Ceramic Society, 2022, 42(8): 3570-3578.
|
| [16] |
QIAN B, WANG Y, ZU J H, et al. A review on multicomponent rare earth silicate environmental barrier coatings[J]. Journal of Materials Research and Technology, 2024, 29: 1231-1243.
|
| [17] |
WANG X, CHENG M H, XIAO G Z, et al. Preparation and corrosion resistance of high—entropy disilicate (Y0.25Yb0.25Er0.25Sc0.25)2Si2O7 ceramics[J]. Corrosion Science, 2021, 192: 109786.
|
| [18] |
WEI F S, ZHANG D X, GONG X, et al. A systematic analysis of the calcium—magnesium—aluminosilicate corrosion behavior of high—entropy (5Re0.2)2Si2O7 materials[J]. Corrosion Science, 2023, 219: 111221.
|
| [19] |
CHEN G H, ZHANG Y L, GUO X T, et al. Microstructure and water corrosion behavior of (Lu0.2Yb0.2Er0.2Tm0.2Sc0.2)2Si2O7 high—entropy rare—earth disilicate coating for SiC coated C/C composites[J]. Journal of the European Ceramic Society, 2023, 43(8): 3647-3657.
|
| [20] |
WEI F S, ZHANG D X, LIU Y, et al. Novel (Yb0.2Tm0.2Lu0.2Sc0.2Gd0.2)2Si2O7: exploring its potential for comprehensive performance in environmental barrier coatings[J]. Journal of the European Ceramic Society, 2024, 44(4): 2512-2521.
|
| [21] |
LUO Z W, JIANG J N, DONG S J, et al. (Gd0.2Ho0.2Er0.2Yb0.2Lu0.2)2Si2O7 and (Sc0.2Ho0.2Er0.2Yb0.2Lu0.2)2Si2O7 high—entropy rare—earth disilicates as promising materials for environmental barrier coatings[J]. Ceramics International, 2024, 50(13, Part A): 23342-23355.
|
| [22] |
TURCER L R, SENGUPTA A, PADTURE N P. Low thermal conductivity in high—entropy rare—earth pyrosilicate solid—solutions for thermal environmental barrier coatings[J]. Scripta Materialia, 2021, 191: 40-45.
|
| [23] |
HAO S Q, OLEKSAK R P, DOĞAN Ö N, et al. Computational design of high—entropy rare earth disilicates as next—generation thermal/environmental barrier coatings[J]. Acta Materialia, 2023, 258: 119225.
|
| [24] |
WANG Y D, LIU D R, LI Z, et al. Data—driven design of high—entropy silicate ceramics with low thermal conductivity[J]. Materials & Design, 2025, 256: 114277.
|
| [25] |
SUN L C, LUO Y X, TIAN Z L, et al. High temperature corrosion of (Er0.25Tm0.25Yb0.25Lu0.25)2Si2O7 environmental barrier coating material subjected to water vapor and molten calcium—magnesium—aluminosilicate (CMAS)[J]. Corrosion Science, 2020, 175: 108881.
|
| [26] |
XUE Z L, ZHU Y, ZHOU L, et al. Thermal aging and CMAS corrosion behaviors of Y2SiO5 ceramic for environmental barrier coatings[J]. Journal of Alloys and Compounds, 2023, 968: 172114.
|
| [27] |
FENG T S, WANG Q Y, ADAPA S R, et al. A model to separate conduction and radiation in high temperature laser flash measurements for semi—transparent materials[J]. International Journal of Heat and Mass Transfer, 2024, 223: 125228.
|
| [28] |
ZHANG R Z, REECE M. Review of high entropy ceramics: design, synthesis, structure and properties[J]. Journal of Materials Chemistry A, 2019, 7(39):22148−22162.
|
| [29] |
WANG Y L, ZHANG J, WU T B, et al. Full—scale insight into high—entropy ceramics from basic concepts, synthesis technologies, structural characteristics, and properties to application prospects[J]. Journal of Materials Research and Technology, 2024, 33: 398-430.
|
| [30] |
ZHAO Z F, XIANG H M, DAI F Z, et al. (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7: a novel high—entropy ceramic with low thermal conductivity and sluggish grain growth rate[J]. Journal of Materials Science and Technology, 2019, 35(11): 2647-2651.
|
| [31] |
ZHANG J L, LIANG J L, LI H, et al. A review of high—entropy ceramics preparation methods, properties in different application fields and their regulation methods[J]. Journal of Materials Research and Technology, 2024, 32: 1083-1117.
|
| [32] |
LI K B, WANG W Z, TU S T, et al. Design of high—entropy rare—earth disilicate materials for thermal environmental barrier coatings through thermal—mechanical experiments and finite element simulation studies[J]. Ceramics International, 2025, 51(8): 10551-10573.
|
| [33] |
KAVAK S, YÜKSEK A N, GÖKÇE H, et al. γ—type high—entropy disilicates (Y0.2Er0.2Tm0.2Yb0.2X0.2)2Si2O7 (X = Dy, Gd, Ho): phase stability, thermal behavior, and CMAS corrosion resistance[J]. Journal of Alloys and Compounds, 2026, 1057: 186932.
|
| [34] |
WU J Y, HU X P, LIU S, et al. High—temperature mechanical properties and fracture mechanism of A6B2O17 (A= Hf, Zr; B= Ta, Nb) high—entropy ceramics[J]. Journal of the European Ceramic Society, 2024, 44(6): 3652-3663.
|
| [35] |
周少帅, 舒小勇, 常振东, 等. (Sm0.2Gd0.2Eu0.2Lu0.2Dy0.2)2Zr2O7 高熵稀土锆酸盐陶瓷材料设计与热物理性能[J]. 材料工程, 2025, 53(12): 288-296.
|
| [36] |
ZHOU S S, SHU X Y, CHANG Z D, et al. Design and thermophysical properties of (Sm0.2Gd0.2Eu0.2Lu0.2Dy0.2)2Zr2O7 high entropy rare earth zirconic acid ceramic materials[J]. Journal of Materials Engineering, 2025, 53(12): 288-296.
|
基金资助
安徽省自然科学基金项目(2408085JX008)
安徽省自然科学基金项目(2308085QE135)
安徽省质量基础设施标准化专项(2023MKS01)