PDF (1115K)
摘要
面向薄规格高温合金板带冷轧中高变形抗力、板形与表面质量耦合以及设备参数匹配等难题,构建热力耦合弹塑性接触有限元模型,联动辊系弹性、机架刚度、压下与速度、机架间张力及乳化液摩擦传热特性,采用多目标帕累托与响应面回归寻优,形成压下与速度的协同设定区间,并给出张力与弯辊、辊型的二次校核路径。提出以高刚度四辊机组、可变辊型与正负弯辊及中间辊横移、AGC与AFC协同控制为核心的设备升级与智能化改造方案,配合分区喷淋、润滑浓度与清洁度在线监测和轧后清洗干燥闭环。结果验证了多机架参数耦合优化与热摩擦弹性协同控制在提升厚度精度、板形稳定与表面清洁度方面的有效性,为高温合金板带薄规格稳定供货提供成套技术路径。
Abstract
To address the challenges in cold rolling of thin-section high-temperature alloy sheets, such as high deformation resistance, coupled plate shape and surface quality, and equipment parameter matching, a thermal-coupled elastoplastic contact finite element model was constructed. The elastic properties of the rolls, the rigidity of the frame, the lowering and speed, the tension between the frames, and the frictional heat transfer characteristics of the emulsion were all taken into account. Multi-objective Pareto and response surface regression optimization were employed to form the coordinated setting range for lowering and speed, and the secondary verification paths for tension, bending rolls, roll type, and cross movement of the middle roll were provided. A device upgrade and intelligent transformation scheme centered on a high-stiffness four-roll unit, variable roll type, positive and negative bending rolls, and cross movement of the middle roll, as well as AGC and AFC collaborative control was proposed. Combined with zone spraying, online monitoring of lubrication concentration and cleanliness, and post-rolling cleaning and drying closure, the effectiveness of multi-machine parameter coupling optimization and thermal friction elasticity collaborative control in improving thickness accuracy, plate shape stability, and surface cleanliness was verified. This provides a complete technical path for stable supply of high-temperature alloy sheet products with thin specifications.
关键词
Key words
[Author(id=1330240253261058738, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, orderNo=0, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330240253323973303, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, authorId=1330240253261058738, language=EN, stringName=Mingchen Zhao, firstName=Mingchen, middleName=null, lastName=Zhao, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=Steel Research Engineering Design Co., Ltd., Beijing, 100081, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330240253370110648, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, authorId=1330240253261058738, language=CN, stringName=赵明臣, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=钢研工程设计有限公司,中国·北京 100081, bio={"content":"赵明臣(1981-),男,中国北京人,本科,高级工程师,从事轧钢研究。
"}, bioImg=null, bioContent=赵明臣(1981-),男,中国北京人,本科,高级工程师,从事轧钢研究。
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330240253185561259, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, xref=null, ext=[AuthorCompanyExt(id=1330240253202338476, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, companyId=1330240253185561259, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=Steel Research Engineering Design Co., Ltd., Beijing, 100081, China), AuthorCompanyExt(id=1330240253214921390, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, companyId=1330240253185561259, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=钢研工程设计有限公司,中国·北京 100081)])]), Author(id=1330240253416247996, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, orderNo=1, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330240253479162559, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, authorId=1330240253416247996, language=EN, stringName=Fuqiang Mei, firstName=Fuqiang, middleName=null, lastName=Mei, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=Steel Research Engineering Design Co., Ltd., Beijing, 100081, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330240253525299905, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, authorId=1330240253416247996, language=CN, stringName=梅富强, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=钢研工程设计有限公司,中国·北京 100081, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330240253185561259, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, xref=null, ext=[AuthorCompanyExt(id=1330240253202338476, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, companyId=1330240253185561259, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=Steel Research Engineering Design Co., Ltd., Beijing, 100081, China), AuthorCompanyExt(id=1330240253214921390, tenantId=1045748351789510663, journalId=1327663300738252819, articleId=1330177127899791508, companyId=1330240253185561259, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=钢研工程设计有限公司,中国·北京 100081)])])]
赵明臣,梅富强.
高温合金板带冷轧现状分析[J].
工程机械与技术杂志, 2026, 2(3): 4-6 DOI:
| [1] |
段云波,王皓,马鑫,刘庆,王敏. 冷轧汽车板表面“sliver”缺陷溯源分析研究[J].连铸,2025,44(02):15-21.
|
| [2] |
任禹铜,于庆波,秦勤. 冷轧带钢感应加热退火过程的数值模拟[J].材料与冶金学报,2025,24(03):293-300.
|
| [3] |
游鑫,蔡笑蓉,杨庚蔚,金学军. 薄板坯热轧过程多物理场演化与工艺参数的有限元分析[J].上海金属
|