铣车复合加工中心温控源关键参数设计方法

刘宏 ,  田文杰 ,  张大卫 ,  高卫国 ,  蔡春刚 ,  陈虎

天津大学学报(自然科学与工程技术版) ›› 2026, Vol. 59 ›› Issue (11) : 1166 -1175.

PDF (1993KB)
天津大学学报(自然科学与工程技术版) ›› 2026, Vol. 59 ›› Issue (11) : 1166 -1175. DOI: 10.11784/tdxbz202506039

铣车复合加工中心温控源关键参数设计方法

作者信息 +

Design Method for Key Parameters of Temperature Control Source for Milling-Turning Composite Machining Center

Author information +
文章历史 +
PDF (2040K)

摘要

热误差是影响精密数控机床加工精度的重要因素.除了热平衡设计、热误差补偿之外,主动温控技术是保障机床热稳定性、减小热误差的又一有效手段,其可通过在机床结构件表面或内部设置温控回路,采用多回路、差异化的主动闭环温度场控制策略,实时调控整机温度场分布状态和热变形状态,从而抑制机床热变形,提高整机热精度和热稳定性.然而,目前在机床热误差主动温控过程中尚缺乏对于主动温控源关键参数的系统性分析与设计方法.针对现有数控机床主动温控方法中主动温控源安装位置参数及功率特性关键参数匹配设计难题,以KTX1250TC型号五轴卧式铣车复合加工中心为研究对象,研究了机床内生热源和主动温控源作用下整机温度场分布状态及结构件热变形规律,揭示了主动温控源功率特性关键参数对进给轴运动部件热致位姿误差的影响规律;进而采用神经网络拟合方法建立了主动温控源安装位置关键参数与进给轴热致运动误差间的定量映射模型;最后以进给轴运动部件综合热误差最小为目标,提出了主动温控源位置与功率参数的联合优选方法,为主动温控系统与机床间的匹配设计提供理论依据.结果表明,所提方法可使进给轴的综合热误差降低约60%,有效调控了整机的热精度,为主动温控技术在工程中的应用提供了技术支撑.

Abstract

Thermal error is an important factor affecting the machining accuracy of precision CNC machine tools. In addition to thermal balance design and thermal error compensation,the active temperature control technology is another effective means to ensure the thermal stability of machine tools and reduce thermal errors. It can suppress the thermal deformation of the machine tool,improve the thermal accuracy and stability of the whole machine by setting temperature control circuits on the surface or inside of the machine tool structural components,adopting a multi-loop,differentiated active closed-loop temperature field control strategy,and real-time control of the temperature field distribution and thermal deformation status of the whole machine. However,there is currently a lack of systematic analysis and design methods for key parameters of active temperature control sources in the active temperature control process of machine tool thermal errors. In response to the difficult problem of matching the key parameters of the installation position and power characteristics of the active temperature control source in the existing active temperature control methods for CNC machine tools,the KTX1250TC five-axis horizontal milling-turning composite machining center was taken as the research object. The distribution of the temperature field of the entire machine and the thermal deformation law of structural components under the action of the internal heat source and active temperature control source of the machine tool were studied,and the influence law of the key parameters of the power characteristics of the active temperature control source on the thermal-induced pose error of the feed axis moving parts was revealed. Furthermore,a quantitative mapping model was established between the key parameters of the installation position of the active temperature control source and the thermal motion error of the feed axis using neural network fitting method. Finally,with the goal of minimizing the comprehensive thermal error of the feed axis moving components,a joint optimization method for the position and power parameters of the active temperature control source was proposed,providing a theoretical basis for the matching design between the active temperature control system and the machine tool. The results show that the proposed method can reduce the comprehensive thermal error of the feed shaft by about 60%,effectively regulate the thermal accuracy of the whole machine,and provide technical support for the application of active temperature control technology in engineering.

关键词

铣车复合加工中心 / 热误差 / 温度场 / 主动温控技术

Key words

milling-turning composite machining center / thermal error / temperature field / active temperature control technology

引用本文

引用格式 ▾
刘宏,田文杰,张大卫,高卫国,蔡春刚,陈虎. 铣车复合加工中心温控源关键参数设计方法[J]. 天津大学学报(自然科学与工程技术版), 2026, 59(11): 1166-1175 DOI:10.11784/tdxbz202506039

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

杨建国, 姚晓栋. 数控机床误差补偿技术现状与展望[J]. 世界制造技术与装备市场, 2012(3): 64—71, 95.

[2]

Yang Jianguo, Yao Xiaodong. Present situation and prospect of error compensation technology for CNC machine tools[J]. World Manufacturing Engineering & Market, 2012(3): 64—71, 95(in Chinese).

[3]

Bryan J.. International status of thermal error research (1990)[J]. CIRP Annals:Manufacturing Technology, 1990, 39(2): 645-656.

[4]

Mayr J, Jedrzejewski J, Uhlmann E, et al. Thermal issues in machine tools[J]. CIRP Annals, 2012, 61(2): 771-791.

[5]

项四通, 杜正春, 杨建国. 数控机床几何与热误差测量和建模研究新进展[J]. 机械设计与研究, 2019, 35(6): 52-57.

[6]

Xiang Sitong, Du Zhengchun, Yang Jianguo. Recent advances in measurement and modeling of geometric and thermal error of CNC machine tools[J]. Mechine Design & Research, 2019, 35(6): 52-57(in Chinese).

[7]

赵万芹, 刘昊栋, 施虎. 机床热特性研究[J]. 科学技术与工程, 2021, 21(7): 2563-2574.

[8]

Zhao Wanqin, Liu Haodong, Shi Hu. Research on thermal characteristics of machine tools[J]. Science Technology and Engineering, 2021, 21(7) : 2563-2574(in Chinese).

[9]

Liang Y C, Su H, Lu L H, et al. Thermal optimization of an ultra—precision machine tool by the thermal displacement decomposition and counteraction method[J]. The International Journal of Advanced Manufacturing Technology, 2015, 76(1): 635-645.

[10]

杜正春, 范开国, 杨建国. 数控机床误差实时补偿技术及应用[M]. 北京: 机械工业出版社, 2020.

[11]

Du Zhengchun, Fan Kaiguo, Yang Jianguo. Real—Time Error Compensation Technology for CNC Machine Tool and Its Application[M]. Beijing: China Machinery Industry Press, 2020(in Chinese).

[12]

刘阔, 韩伟, 王永青, 等. 数控机床进给轴热误差补偿技术研究综述[J]. 机械工程学报, 2021, 57(3): 156-173.

[13]

Liu Kuo, Han Wei, Wang Yongqing, et al. Review on thermal error compensation for feed axes of CNC machine tools[J]. Journal of Mechanical Engineering, 2021, 57(3): 156-173(in Chinese).

[14]

Liu K, Song L, Liu H Q, et al. Online evolutionary method for mechanism—driven time—varying thermal error model of machine tools[J]. IEEE Transactions on Industrial Informatics, 2024, 20(12): 13656-13664.

[15]

Jia G J, Zhang X, Wang X Z, et al. A spindle thermal error modeling based on 1DCNN—GRU—Attention architecture under controlled ambient temperature and active cooling[J]. International Journal of Advanced Manufacturing Technology, 2023, 127(3): 1525-1539.

[16]

Liu K, Song L, Han W, et al. Time—varying error prediction and compensation for movement axis of CNC machine tool based on digital twin[J]. IEEE Transactions on Industrial Informatics, 2022, 18(1): 109-118.

[17]

Ma C, Gui H Q, Liu J L. Self learning—empowered thermal error control method of precision machine tools based on digital twin[J]. Journal of Intelligent Manufacturing, 2023, 34(2): 695-717.

[18]

Ma C, Zhao L, Mei X S, et al. Thermal error compensation of high—speed spindle system based on a modified BP neural network[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(9/10/11/12): 3071-3085.

[19]

Weng L T, Gao W G, Zhang D W, et al. Analytical modelling of transient thermal characteristics of precision machine tools and real—time active thermal control method[J]. International Journal of Machine Tools and Manufacture, 2023, 186: 104003.

[20]

Mitsuishi M, Warisawa S, Hanayama R. Development of an intelligent high—speed machining center[J]. CIRP Annals:Manufacturing Technology, 2001, 50(1): 275-280.

[21]

Li G L, Wang Z Y, Li Z Y, et al. Segmented modeling and compensation of thermal error of gear grinding machine spindle based on variable thermal hysteresis[J]. International Journal of Advanced Manufacturing Technology, 2023, 126(11): 5107-5121.

[22]

Zhang Y F, Wang P, Liu T, et al. Active and intelligent control onto thermal behaviors of a motorized spindle unit[J]. The International Journal of Advanced Manufacturing Technology, 2018, 98(9): 3133-3146.

[23]

Sun J C, Liu Z Y, Qiu C, et al. An axial attention—BiLSTM—based method for predicting the migration of CNC machine tool spindle thermal error under varying working conditions[J]. International Journal of Advanced Manufacturing Technology, 2024, 130(3): 1405-1419.

[24]

赵亮, 雷默涵, 朱星星, 等. 高精度数控机床主轴系统热误差的控制方法[J]. 上海交通大学学报, 2020, 54(11): 1165-1171.

[25]

Zhao Liang, Lei Mohan, Zhu Xingxing, et al. A new thermal error control method for spindle system of high precision computer numerical control machine tools[J]. Journal of Shanghai Jiao Tong University, 2020, 54(11): 1165-1171(in Chinese).

[26]

赵亮, 王孟超, 雷默涵, 等. 精密镗床进给轴差异化主动冷却方法[J]. 西安交通大学学报, 2022, 56(2): 91-100.

[27]

Zhao Liang, Wang Mengchao, Lei Mohan, et al. A differentiated active cooling strategy for feed axis of precision boring machine[J]. Journal of Xi'an Jiaotong University, 2022, 56(2): 91-100(in Chinese).

[28]

Lei M H, Gao F, Li Y, et al. Feedback control—based active cooling with pre—estimated reliability for stabilizing the thermal error of a precision mechanical spindle[J]. International Journal of Advanced Manufacturing Technology, 2022, 121(3): 2023-2040.

[29]

褚亚强, 刘腾, 张艺凡, 等. 电主轴单元热误差半闭环主动控制方法[J]. 机械设计与研究, 2021, 37(5): 111-116.

[30]

Chu Yaqiang, Liu Teng, Zhang Yifan, et al. Semi closed loop active control method for thermal error of motorized spindle unit[J]. Mechine Design & Research, 2021, 37(5): 111-116(in Chinese).

[31]

Zheng Y J, Gao W G, Zhang D W, et al. Active temperature control method based on time grating principle for the feed system of precision machine tool and its application[J]. International Journal of Advanced Manufacturing Technology, 2023, 124(5): 1537-1555.

[32]

刘兴国. 机床结构热主动控制装置与方法研究及应用[D]. 天津: 天津大学, 2017.

[33]

Liu Xingguo. Research and Application of Thermal Active Control Device and Method for Machine Tool Structure[D]. Tianjin :Tianjin University , 2017(in Chinese).

[34]

李伟. 精密卧式加工中心结构热源布局与热主动控制方法[D]. 天津: 天津大学, 2021.

[35]

Li Wei. Heat Source Layout and Thermal Active Control Method of Precision Horizontal Machining Center Structure[D]. Tianjin :Tianjin University , 2021(in Chinese).

[36]

Choi H S, Lee S K. Machining error compensation of external cylindrical grinding using thermally actuated rest[J]. Mechatronics, 2002, 12(5): 643-656.

[37]

翁凌韬. 基于解析建模的精密机床结构热平衡设计及热主动控制方法[D]. 天津: 天津大学, 2021.

[38]

Weng Lingtao. Thermal Balancing Design and Thermal Active Control Methods for Precision Machine Tool Structural Components Based on Analytical Modeling Method[D]. Tianjin: Tianjin University, 2021(in Chinese).

[39]

潘文. 多热源作用下机床结构热特性仿真分析与主动控制方法[D]. 天津: 天津大学, 2019.

[40]

Pan Wen. Simulation Analysis and Active Control Method of Thermal Characteristics of Machine Tool Structure Under the Multi—Heat Source[D]. Tianjin:Tianjin University, 2019(in Chinese).

[41]

田文杰. 精密卧式加工中心几何精度设计及误差补偿方法研究[D]. 天津: 天津大学, 2015.

[42]

Tian Wenjie. Investigation into Accuracy Design and Error Compensation of High—Precision Horizontal Machining Centers[D]. Tianjin:Tianjin University, 2015(in Chinese).

[43]

董源, 过增元. 从热质理论到能质理论[J]. 工程热物理学报, 2012, 33(3): 465-468.

[44]

Dong Yuan, Guo Zengyuan. From thermomass theory to kinetomass theory[J]. Journal of Engineering Thermophysics, 2012, 33(3): 465-468(in Chinese).

基金资助

国家重点研发计划资助项目(2022YFB3402004)

AI Summary AI Mindmap
PDF (1993KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉