考虑磁悬浮轴承损耗的高速永磁同步电机集总参数热网络模型

徐园平 ,  宋成琪 ,  周瑾 ,  金超武 ,  于敏

天津大学学报(自然科学与工程技术版) ›› 2026, Vol. 59 ›› Issue (11) : 1176 -1186.

PDF (2562KB)
天津大学学报(自然科学与工程技术版) ›› 2026, Vol. 59 ›› Issue (11) : 1176 -1186. DOI: 10.11784/tdxbz202507018

考虑磁悬浮轴承损耗的高速永磁同步电机集总参数热网络模型

作者信息 +

Lumped Parameter Thermal Network Model of a High-Speed Permanent Magnet Synchronous Motor Considering Magnetic Bearing Losses

Author information +
文章历史 +
PDF (2623K)

摘要

磁悬浮永磁同步电机功率密度高、转速快而结构紧凑,冷却裕量相对有限,其内部温度的准确、快速预测对高速安全运行至关重要.损耗作为系统热源,直接决定温升水平.以一台额定转速 25 020 r/min 的高速磁悬浮永磁同步电机为对象,针对高速下铁心损耗受非线性磁化和趋肤效应影响而难以精确计算问题,采用变系数 Bertotti 模型进行拟合.该模型通过引入随磁感应强度变化的动态磁滞损耗幂指数,并在涡流损耗项中综合考虑趋肤效应与材料磁特性非线性,使铁心损耗拟合最大误差控制在 10%以内,有效提高了铁耗计算精度.此外,构建了 42 节点的磁悬浮轴承和永磁同步电机耦合的集总参数热网络模型(LPTN).考虑到磁悬浮轴承结构复杂,将其等效为空心圆柱并采用 T 型热网络结构进行建模,有效降低了建模难度.通过计算流体动力学(CFD)仿真和满载工况温升实验对模型进行验证.结果表明:LPTN 耦合模型温度预测值和仿真、实验数据具有良好一致性,证明该模型能够在高速工况下实现对永磁同步电机和磁悬浮轴承温度的快速、准确预测,为系统热设计和温控策略制定提供可靠依据.

Abstract

Magnetically suspended permanent magnet synchronous motors(MSPMSMs)feature high power density,high rotational speed,and compact structures,resulting in limited cooling capability. Accurate and rapid prediction of internal temperature is therefore essential for reliable operation. As the heat sources,losses directly determine the level of temperature rise. Taking an MSPMSM with a rated speed of 25 020 r/min as the study object,this work addresses the reduced accuracy of conventional core-loss calculations caused by nonlinear magnetization and skin effects. A variable-coefficient Bertotti model is adopted,in which a dynamic hysteresis loss exponent varying with magnetic flux density is introduced,and the eddy current term incorporates both skin effects and nonlinear magnetic characteristics. This approach limits the maximum iron loss fitting error to within 10%,significantly improving prediction accuracy. Furthermore,a 42-node lumped parameter thermal network(LPTN)model is developed to describe the coupled thermal behavior of the MSPMSM and its magnetic bearings. Considering the structural complexity of the magnetic bearings,they are equivalently modeled as hollow cylinders using a T-type thermal network structure,effectively reducing modeling complexity. The proposed model is validated through computational fluid dynamics simulations and full-load temperature rise experiments. The predicted temperatures show good agreement with both simulation and experimental results,demonstrating that the model enables fast and accurate temperature prediction for the MSPMSM and its magnetic bearings. This provides a reliable foundation for thermal design and temperature control strategy development.

关键词

永磁同步电机 / 磁悬浮轴承 / 集总参数热网络 / 热分析

Key words

permanent magnet synchronous motor(PMSM) / magnetic bearing / lumped parameter thermal network(LPTN) / thermal analysis

引用本文

引用格式 ▾
徐园平,宋成琪,周瑾,金超武,于敏. 考虑磁悬浮轴承损耗的高速永磁同步电机集总参数热网络模型[J]. 天津大学学报(自然科学与工程技术版), 2026, 59(11): 1176-1186 DOI:10.11784/tdxbz202507018

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

周金宇, 朱 秋. 磁悬浮轴承发展及其研究综述[J]. 微电机, 2022, 55(6): 93-98.

[2]

Zhou Jinyu, Zhu Huangqiu. Development and research summary of magnetic bearings[J]. Micromotors, 2022, 55(6): 93-98(in Chinese).

[3]

寇宝泉, 赵晓坤, 张浩泉, 等. 永磁同步电机电磁结构及磁场调节技术的综述分析[J]. 中国电机工程学报, 2021, 41(20): 7126-7141.

[4]

Kou Baoquan, Zhao Xiaokun, Zhang Haoquan, et al. Review and analysis of electromagnetic structure and magnetic field regulation technology of the permanent magnet synchronous motor[J]. Proceedings of the CSEE, 2021, 41(20): 7126-7141(in Chinese).

[5]

Madonna V, Giangrande P, Lusuardi L, et al. Thermal overload and insulation aging of short duty cycle,aerospace motors[J]. IEEE Transactions on Industrial Electronics, 2020, 67(4): 2618-2629.

[6]

唐 旭, 王秀和, 李 莹, 等. 异步起动永磁同步电动机起动过程中永磁体退磁研究[J]. 中国电机工程学报, 2015, 35(4): 961-970.

[7]

Tang Xu, Wang Xiuhe, Li Ying, et al. Demagnetization study for line—start permanent magnet synchronous motor during starting process[J]. Proceedings of the CSEE, 2015, 35(4): 961-970 (in Chinese).

[8]

Nishanth F, Johnson M, Severson E L. A review of thermal analysis and management of power dense electric machines[C]// 2021 IEEE International Electric Machines & Drives Conference (IEMDC). Hartford ,USA, 2021: 1-8.

[9]

Zhao J P, Wu X Z. Thermal analysis of permanent Mag—net synchronous motor based on equivalent thermal net—work method[C]// 2022 25th International Conference on Electrical Machines and Systems(ICEMS). Chiang Mai,Thailand, 2022: 1-4.

[10]

佟文明, 孙静阳, 舒圣浪, 等. 不同数值方法在自扇冷永磁同步电机三维热分析中的应用[J]. 电工技术学报, 2017, 32(1): 151-159.

[11]

Tong Wenming, Sun Jingyang, Shu Shenglang, et al. Application of different numerical methods in 3D thermal analysis for fan—ventilated permanent magnet synchro—nous machines[J]. Transactions of China Electrotechni—cal Society, 2017, 32(1): 151-159(in Chinese).

[12]

Liang D W, Zhu Z Q, Dey A.. High—fidelity lumped—parameter thermal models for assessing cooling tech—niques of PMSMs in EV applications[J]. CES Transac—tions on Electrical Machines and Systems, 2025, 9(1): 1-14.

[13]

Steinmetz C P. On the law of hysteresis[J]. Proceedings of the IEEE, 1984, 72(2): 197-221.

[14]

Bertotti G. General properties of power losses in soft ferromagnetic materials[J]. IEEE Transactions on Mag—netics, 1988, 24(1): 621-630.

[15]

Liu B, Yu Z J, Fu J. Thermal modeling and analysis of a HPMSM coupling with magnetic bearings[J]. IEEE Access, 2024, 12: 81362-81373.

[16]

Mukundan S,Dhulipati H,Tjong J, et al. Parameter determination of PMSM using coupled electromagnetic and thermal model incorporating current harmonics[J]. IEEE Transactions on Magnetics, 2018, 54(11): 8110505.

[17]

Lan Z Y, Wei X H, Chen L H. Thermal analysis of PMSM based on lumped parameter thermal network method[C]// 2016 19th International Conference on Elec—trical Machines and Systems(ICEMS). Chiba,Japan, 2016: 1-5.

[18]

Chen Q X, Liang D L, Gao L, et al. Hierarchical ther—mal network analysis of axial—flux permanent—magnet synchronous machine for electric motorcycle[J]. IET Electric Power Applications, 2018, 12(6): 859-866.

[19]

Han B, Liu X, Huang Z, et al. Loss calculation,thermal analysis,and measurement of magnetically sus—pended PM machine[J]. IEEE Transactions on Industrial Electronics, 2018, 65(6): 4514-4523.

[20]

徐永明, 庞松印, 刘文辉, 等. 高速永磁同步电动机变系数铁耗计算模型[J]. 电机与控制学报, 2023, 27(7): 174-182.

[21]

Xu Yongming, Pang Songyin, Liu Wenhui, et al. Cal—culation model of core loss with variable coefficient of high—speed permanent magnet synchronous motors[J]. Electric Machines and Control, 2023, 27(7): 174-182(in Chinese).

[22]

闫 旭, 金超武, 熊 峰, 等. 径向磁悬浮轴承铁损特性研究[J]. 测试技术学报, 2020, 34(1): 68—73, 76.

[23]

Yan Xu, Jin Chaowu, Xiong Feng, et al. Research on iron loss characteristics of radial suspension bearings[J]. Journal of Test and Measurement Technology, 2020, 34(1): 68—73, 76(in Chinese).

[24]

Szumiata T, Rekas P, Gzik—Szumiata M, et al. The two—domain model utilizing the effective pinning energy for modeling the strain—dependent magnetic permeability in anisotropic grain—oriented electrical steels[J]. Materi—als, 2024, 17(2): 369.

[25]

Han M, Dutton R W, Fan S. Model dispersive media in finite—difference time—domain method with complex—conjugate pole—residue pairs[J]. IEEE Microwave and Wireless Components Letters, 2006, 16(3): 119-121.

[26]

Yu W, Hua W, Qi J, et al. Coupled magnetic field—thermal network analysis of modular—spoke—type perma—nent—magnet machine for electric motorcycle[J]. IEEE Transactions on Energy Conversion, 2021, 36(1): 120-130.

[27]

Huang Z Y, Fang J C, Liu X Q, et al. Loss calculation and thermal analysis of rotors supported by active mag—netic bearings for high—speed permanent—magnet electri—cal machines[J]. IEEE Transactions on Industrial Elec—tronics, 2016, 63(4): 2027-2035.

[28]

王立坤, 郭庆波, 唐勇斌. 大型电机传热系统设计及智能分析方法[M]. 北京: 中国电力出版社, 2024: 34.

[29]

Wang Likun, Guo Qingbo, Tang Yongbin. Design and Intelligent Analysis Method of Heat Transfer System for Large Motor[M]. Beijing : China Electric Power Press, 2024: 34(in Chinese).

[30]

Xu Z Y, Xu Y M, Gai Y H, et al. Thermal manage—ment of drive motor for transportation:Analysis meth—ods,key factors in thermal analysis,and cooling meth—ods:A review[J]. IEEE Transactions on Transportation Electrification, 2023, 9(3): 4751-4774.

基金资助

国家重点研发计划资助项目(2024YFB3410004)

AI Summary AI Mindmap
PDF (2562KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉