矿岩破碎缓倾斜矿床地下开采关键技术与应用

石国华 ,  袁博 ,  郭进平 ,  李泽琛 ,  王小林 ,  李角群 ,  程平 ,  石广斌

矿冶 ›› 2026, Vol. 35 ›› Issue (1) : 18 -26.

PDF (9944KB)
矿冶 ›› 2026, Vol. 35 ›› Issue (1) : 18 -26. DOI: 10.3969/j.issn.1005-7854.2026.01.003
矿山地质、开采与安全

矿岩破碎缓倾斜矿床地下开采关键技术与应用

作者信息 +

Key technologies and applications for underground mining of fractured and gently inclined ore deposits

Author information +
文章历史 +
PDF (10182K)

摘要

矿岩破碎缓倾斜矿床的开采一直是矿山工程中的技术难题。针对刘塘坊铁矿在现有采矿方法下开采此类矿体时面临的安全风险高、效率低等问题,本文开展了采矿方法与采场结构参数优化、多节理岩体中深孔爆破落矿技术及巷道围岩剥落控制技术等方面的系统研究。基于主客观组合赋权法,优选出分段空场嗣后充填采矿方法。通过FLAC3D 数值模拟分析采场稳定性,综合考虑安全性与经济性,确定采场最佳结构参数为:长40 m、宽15 m,间柱厚度7 m。建立了基于不同节理裂隙发育程度的爆破性分级数据库,并开发了中深孔自动设计程序,实现了中深孔落矿爆破的精细化管控。采用工程类比与数值模拟相结合的方法,分析了矿山地应力分布特征,揭示了下盘脉外巷道围岩剥落破坏是矿体回采引起围岩应力重分布的结果,确定巷道与下盘矿岩交界面的最小安全距离为15~30 m,并提出了相应的巷道支护优化参数与动态调控措施。研究成果为刘塘坊铁矿实现安全、高效、经济开采提供了理论依据与技术支撑,每年可节约开采成本约3 747 万元,对类似条件矿山具有参考价值。

Abstract

The mining of fractured and gently inclined ore deposits has long been a challenging technical problem in mining engineering. To address the issues of high safety risks and low efficiency in extracting such ore bodies at Liutangfang Iron Mine under existing mining methods, this study conducted systematic research on the optimization of mining methods and stope structure parameters, medium-length hole caving technology in multi-jointed rock masses, and control techniques for surrounding rock spalling in roadways. Based on a combined subjective and objective weighting method, the subsequent filling mining method with sublevel open stoping was selected as optimal. Through stability analysis of the stope using FLAC3D numerical simulation, and considering both safety and economic factors, the optimal stope structure parameters were determined as follows: length 40 m, width 15 m, and rib pillar thickness 7 m. A blastability classification database based on the development degree of different joint fissures was established, and an automatic design program for medium-length holes was developed, achieving refined management of medium-length hole caving blasting. Using a combination of engineering analogy and numerical simulation, the distribution characteristics of in-situ stress in the mine were analyzed. It was revealed that the spalling failure of the surrounding rock in the footwall external roadway results from stress redistribution caused by ore body extraction. The minimum safe distance between the roadway and the footwall ore-rock interface was determined to be 15–30 m, and corresponding optimization parameters and dynamic control measures for roadway support were proposed. The research results provide theoretical basis and technical support for the safe, efficient, and economical mining of Liutangfang Iron Mine, enabling annual savings in mining costs of approximately 37.47 million yuan. This study offers valuable reference for similar mining conditions.

关键词

破碎矿床 / 采矿方法优选 / 采场稳定性分析 / 中深孔爆破优化 / 巷道支护

Key words

fractured deposit / mining method optimization / stope stability analysis / medium-length hole blasting optimization / roadway support

引用本文

引用格式 ▾
石国华,袁博,郭进平,李泽琛,王小林,李角群,程平,石广斌. 矿岩破碎缓倾斜矿床地下开采关键技术与应用[J]. 矿冶, 2026, 35(1): 18-26 DOI:10.3969/j.issn.1005-7854.2026.01.003

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

刘嘉伟, 黄明清, 陈霖, 等. 缓倾斜破碎矿体集群式液压支柱护顶空场嗣后充填采矿法研究[J]. 矿业研究与开发, 2022, 42(8): 1-6.

[2]

LIU J W, HUANG M Q, CHEN L, et al. Open stoping and subsequent backfill under clustered hydraulic prop roof support for gently-inclined broken orebody[J]. Mining Research and Development, 2022, 42(8): 1-6.

[3]

王小林, 李泽琛, 郭进平, 等. 基于Bayes算法与数值模拟的缓倾斜破碎薄矿体采矿方法优选[J]. 矿产保护与利用, 2024, 44(2): 58-66.

[4]

WANG X L, LI Z C, GUO J P, et al. Optimization of mining method for gently inclined broken thin vein based on Bayes algorithm and numerical simulation[J]. Conservation and Utilization of Mineral Resources, 2024, 44(2): 58-66.

[5]

丁航行, 韩智勇, 任凤玉, 等. 谦比西铜矿缓倾斜中厚破碎矿体分流出矿技术[J]. 金属矿山, 2016(1): 13-16.

[6]

DING H X, HAN Z Y, REN F Y, et al. Divided-flow drawing technology of gently inclined medium-thick broken ore bodies in Chambishi copper mine[J]. Metal Mine, 2016(1): 13-16.

[7]

张宏伟, 张富兴, 孙胜, 等. 缓倾斜破碎矿体高效进路充填采矿方法研究与应用[J]. 黄金科学技术, 2021, 29(6): 899-907.

[8]

ZHANG H W, ZHANG F X, SUN S, et al. Research and application of high-efficiency drift backfill mining method in gently inclined broken orebody[J]. Gold Science and Technology, 2021, 29(6): 899-907.

[9]

代涵, 张金钟, 邢鹏, 等. 缓倾斜中厚破碎矿体上向中深孔分条空场嗣后充填法[J]. 中国有色金属, 2023(增刊1): 136-139.

[10]

DAI H, ZHANG J Z, XING P, et al. Upper middle-deep hole division open stope subsequent filling method for gently inclined medium-thick broken ore body[J]. China Nonferrous Metals, 2023(Sup.1): 136-139.

[11]

展卫露, 张忠传, 李正明, 等. 锡铁山铅锌矿采矿方法优选及采场结构参数优化研究[J]. 矿业研究与开发, 2024, 44(8): 48-55.

[12]

ZHAN W L, ZHANG Z C, LI Z M, et al. Optimal selection of mining methods and optimization of stope structure parameters in Xitieshan lead-zinc mine[J]. Mining Research and Development, 2024, 44(8): 48-55.

[13]

YANG S, ZHANG X, LIANG J, et al. Research on optimization of monitoring nodes based on the entropy weight method for underground mining ventilation[J]. Sustainability, 2023, 15(20): 14985.

[14]

郭进平, 晏承园, 张雯, 等. 分段矿房嗣后充填采矿采场结构参数优化研究[J]. 矿业研究与开发, 2021, 41(10): 1-7.

[15]

GUO J P, YAN C Y, ZHANG W, et al. Optimization study on stope structure parameters of sublevel open stoping with backfill[J]. Mining Research and Development, 2021, 41(10): 1-7.

[16]

尹修平, 冯家宁, 吉豫庆, 等. 基于Mathews稳定性图解法的某矿山空场采矿法优化[J]. 黄金, 2023, 44(11): 28-31.

[17]

YIN X P, FENG J N, JI Y Q, et al. Optimization of open stope mining method in a mine based on Mathews stability graphic method[J]. Gold, 2023, 44(11): 28-31.

[18]

王玉丁, 林卫星, 欧任泽, 等. 分段凿岩阶段空场嗣后充填采矿法采场跨度的优化[J]. 矿业研究与开发, 2024, 44(6): 19-25.

[19]

WANG Y D, LIN W X, OU R Z, et al. Optimization of stope span for sublevel drilling stage open stope with subsequent filling mining method[J]. Mining Research and Development, 2024, 44(6): 19-25.

[20]

黄松, 王俊, 乔登攀, 等. 六边形进路开采围岩稳定性的多因素影响分析[J]. 矿冶, 2023, 32(4): 1-5.

[21]

HUANG S, WANG J, QIAO D P, et al. Analysis of multi-factor influence on surrounding rock stability in hexagonal approach mining[J]. Mining and Metallurgy, 2023, 32(4): 1-5.

[22]

张阳阳, 王炳炜, 林健, 等. 蚕庄金矿破碎围岩矿体爆破条件分级与控制爆破技术[J]. 黄金, 2021, 42(2): 36-40.

[23]

ZHANG Y Y, WANG B W, LIN J, et al. Blasting conditions classification and control blasting technology for ore bodies with fragmented surrounding rock in Canzhuang gold mine[J]. Gold, 2021, 42(2): 36-40.

[24]

郭进平, 刘益超, 李角群, 等. 基于三维巷道模型的深孔爆破扇形布孔优化设计[J]. 工程爆破, 2021, 27(2): 66-72.

[25]

GUO J P, LIU Y C, LI J Q, et al. Optimization design of fan-shaped hole layout for deep-hole blasting based on 3D tunnel model[J]. Engineering Blasting, 2021, 27(2): 66-72.

[26]

刘益超, 郭进平, 李角群, 等. 基于Floyd算法的扇形中深孔爆破布孔优化设计[J]. 爆破, 2021, 38(1): 64-69, 152.

[27]

LIU Y C, GUO J P, LI J Q, et al. Optimal design of hole arrangement for fan-shaped medium-length-hole blasting based on Floyd algorithm[J]. Blasting, 2021, 38(1): 64-69, 152.

[28]

石国华, 白银, 石广斌. 刘塘坊铁矿3#矿体下盘深部脉外巷道围岩剥落原因分析及处理措施[J]. 矿业工程, 2021, 19(4): 7-10.

[29]

SHI G H, BAI Y, SHI G B. Reason analysis and treatment measures for peeling-off of surrounding rock around the outside tunnel of deep vein of lower plate at Liutangfang iron ore 3# mineral body[J]. Mining Engineering, 2021, 19(4): 7-10.

[30]

王贤来, 崔继强, 张鹏强, 等. 静动载条件下深部破碎巷道支护设计及稳定性分析[J]. 金属矿山, 2024(7): 17-23.

[31]

WANG X L, CUI J Q, ZHANG P Q, et al. Support design and stability analysis of deep fractured roadway under static and dynamic condition[J]. Metal Mine, 2024(7): 17-23.

[32]

王志修, 原野, 于世波. 逆断层影响区域破碎巷道稳定性控制对策分析[J]. 矿冶, 2022, 31(4): 1-6.

[33]

WANG Z X, YUAN Y, YU S B. Stability control strategy analysis of broken roadway in affected area of reverse fault[J]. Mining and Metallurgy, 2022, 31(4): 1-6.

[34]

张亭, 李军民, 郭生茂, 等. 深部铜矿破碎岩体巷道支护参数优化研究[J]. 矿冶, 2019, 28(3): 17-21.

[35]

ZHANG T, LI J M, GUO S M, et al. Optimization of roadway support parameters for cracked rock mass in deep copper mine[J]. Mining and Metallurgy, 2019, 28(3): 17-21.

[36]

杜军, 花良奎, 厉美杰, 等. 露天采场台阶爆破萨道夫斯基公式的线性回归分析[J]. 爆破, 2025, 42(2): 1-11.

[37]

DU J, HUA L K, LI M J, et al. Linear regression analysis of Sadovsky formula for open-pit bench blasting[J]. Blasting, 2025, 42(2): 1-11.

基金资助

陕西省重点研发计划项目(2025SF-YBXM-535)

国家博士后研究人员计划项目(GZC20232063)

陕西省自然科学基金资助项目(2024JC-YBQN-0507)

陕西省博士后科研项目(2023BSHYDZZ142)

AI Summary AI Mindmap
PDF (9944KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉