PDF (2739K)
摘要
针对某低品位复杂多金属硫化矿石(Cu 品位0.195%,Fe 品位12.83%),基于其工艺矿物学特征与X 射线透射(XRT)成像分析,研究了预选抛废的可选性。结果表明,矿石中有用矿物嵌布粒度较粗,呈团状、条带状结构,且含磁黄铁矿,Cu、Fe 元素伴生关系明显,具备预选条件。单一XRT 分选试验表明,抛废率30.96% 时,尾矿Cu 品位降至0.058%,精矿Cu 回收率达90.24%,证实其XRT 可选性。磁选试验显示,矿石具弱磁性,强磁选可获部分高铜产物,但单一磁选抛废效果有限。进一步开展磁选联合XRT 分选试验,Cu 回收率提升至93.20%,较单一XRT 分选提高约3 个百分点,联合工艺能更有效地实现预选抛废与铜元素回收。
Abstract
This study investigates the feasibility of pre-concentration and waste removal for a low-grade complex polymetallic sulfide ore (with 0.195% Cu and 12.83% Fe) based on its process mineralogy and X-ray transmission (XRT) imaging characteristics. Results indicate that the valuable minerals are coarsely disseminated, exhibiting massive and banded structures. The ore contains pyrrhotite, and a clear association exists between Cu and Fe elements, providing favorable conditions for pre-concentration. Single XRT sorting tests demonstrated that at a waste rejection rate of 30.96%, the Cu grade in the tailings decreased to 0.058%, while the Cu recovery in the concentrate reached 90.24%, confirming the ore's amenability to XRT sorting. Magnetic separation tests revealed the ore's weak magnetic properties; although high-intensity magnetic separation could yield a partial high-Cu product, single magnetic separation alone showed limited effectiveness for waste removal. Further tests employing a combined magnetic separation and XRT sorting process increased the Cu recovery to 93.20%, representing an improvement of approximately 3 percentage points compared to single XRT sorting. The combined process proves more effective for pre-concentration, waste removal, and copper recovery.
关键词
Key words
[Author(id=1330550320090911255, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, orderNo=0, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=l_hengrun@bgrimm.com, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330550320162214427, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, authorId=1330550320090911255, language=EN, stringName=Hengrun LU, firstName=Hengrun, middleName=null, lastName=LU, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=BGRIMM Machinery and Automation Technology Co. Ltd., Beijing 100160, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330550320216740381, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, authorId=1330550320090911255, language=CN, stringName=鲁恒润, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=北矿机电科技有限责任公司, 北京 100160, bio={"content":"鲁恒润,硕士,高级工程师,主要从事智能矿冶装备研发工作。E-mail:l_hengrun@bgrimm.com
"}, bioImg=null, bioContent=鲁恒润,硕士,高级工程师,主要从事智能矿冶装备研发工作。E-mail:l_hengrun@bgrimm.com
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330550320007025169, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, xref=null, ext=[AuthorCompanyExt(id=1330550320023802387, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, companyId=1330550320007025169, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=BGRIMM Machinery and Automation Technology Co. Ltd., Beijing 100160, China), AuthorCompanyExt(id=1330550320040579604, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, companyId=1330550320007025169, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=北矿机电科技有限责任公司, 北京 100160)])]), Author(id=1330550320262877728, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, orderNo=1, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330550320325792292, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, authorId=1330550320262877728, language=EN, stringName=Yihong YANG, firstName=Yihong, middleName=null, lastName=YANG, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=BGRIMM Machinery and Automation Technology Co. Ltd., Beijing 100160, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330550320371929638, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, authorId=1330550320262877728, language=CN, stringName=杨义红, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=北矿机电科技有限责任公司, 北京 100160, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330550320007025169, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, xref=null, ext=[AuthorCompanyExt(id=1330550320023802387, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, companyId=1330550320007025169, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=BGRIMM Machinery and Automation Technology Co. Ltd., Beijing 100160, China), AuthorCompanyExt(id=1330550320040579604, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, companyId=1330550320007025169, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=北矿机电科技有限责任公司, 北京 100160)])]), Author(id=1330550320418066984, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, orderNo=2, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330550320476787244, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, authorId=1330550320418066984, language=EN, stringName=Xiang LI, firstName=Xiang, middleName=null, lastName=LI, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=BGRIMM Machinery and Automation Technology Co. Ltd., Beijing 100160, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330550320527118894, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, authorId=1330550320418066984, language=CN, stringName=李翔, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=北矿机电科技有限责任公司, 北京 100160, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330550320007025169, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, xref=null, ext=[AuthorCompanyExt(id=1330550320023802387, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, companyId=1330550320007025169, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=BGRIMM Machinery and Automation Technology Co. Ltd., Beijing 100160, China), AuthorCompanyExt(id=1330550320040579604, tenantId=1045748351789510663, journalId=1327662813561454606, articleId=1330550319189135866, companyId=1330550320007025169, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=北矿机电科技有限责任公司, 北京 100160)])])]
鲁恒润,杨义红,李翔.
磁选——XRT 联合工艺强化低品位铜多金属硫化矿预选抛废[J].
矿冶, 2026, 35(1): 59-64 DOI:10.3969/j.issn.1005-7854.2026.01.009
| [1] |
尹政道, 刘殿文, 于星才, 等. “磨矿-筛分-筛下浮选”联合工艺回收高品位铜炉渣中的铜[J]. 矿冶, 2025, 34(2): 280-288.
|
| [2] |
YIN Z D, LIU D W, YU X C, et al. Integrated grinding-sieving-underflow flotation process for copper recovery from high-grade copper slag[J]. Mining and Metallurgy, 2025, 34(2): 280-288.
|
| [3] |
冯梦菲, 谢海云, 宋紫欣, 等. 预选抛废技术发展现状[J]. 矿冶, 2024, 33(3): 329-338.
|
| [4] |
FENG M F, XIE H Y, SONG Z X, et al. Development status of preconcentration discarding technology[J]. Mining and Metallurgy, 2024, 33(3): 329-338.
|
| [5] |
罗仙平, 宁湘菡, 王涛, 等. 智能分拣选矿技术的发展及其应用[J]. 金属矿山, 2019(7): 113-117.
|
| [6] |
LUO X P, NING X H, WANG T, et al. Development and application of intelligent picking technology[J]. Metal Mine, 2019(7): 113-117.
|
| [7] |
余新文, 杨敏, 毛素荣, 等. X射线分选技术在磷矿石选矿中的应用研究[J]. 化工矿物与加工, 2020, 49(9): 31-33, 39.
|
| [8] |
YU X W, YANG M, MAO S R, et al. Research on application of X-ray separation technology in beneficiation of phosphate rock[J]. Industrial Minerals & Processing, 2020, 49(9): 31-33, 39.
|
| [9] |
朱道瑶, 梁殿印, 史佩伟, 等. 矿石拣选技术和设备的研究和进展[J]. 矿山机械, 2016, 44(7): 5-10.
|
| [10] |
ZHU D Y, LIANG D Y, SHI P W, et al. Research and development of ore sorting technology and equipments[J]. Mining & Processing Equipment, 2016, 44(7): 5-10.
|
| [11] |
鲁恒润, 杨义红, 李翔. 基于X射线透射技术的某锡多金属矿预选抛废试验研究[J]. 有色金属工程, 2024, 14(10): 101-106.
|
| [12] |
LU H R, YANG Y H, LI X. Experimental study on the pre-separation and disposal of a certain tin polymetallic ore based on X-ray transmission technology[J]. Nonferrous Metals Engineering, 2024, 14(10): 101-106.
|
| [13] |
朱道瑶, 杨义红, 冉红想, 等. SmaRay智能矿石分选机研制与应用研究[J]. 有色金属(选矿部分), 2022(3): 130-134.
|
| [14] |
ZHU D Y, YANG Y H, RAN H X, et al. Development and application of SmaRay intelligent ore sorter[J]. Nonferrous Metals(Mineral Processing Section), 2022(3): 130-134.
|
| [15] |
张倩, 陈辰, 王文才, 等. X射线分选机预选钍矿石的试验研究[J]. 矿冶, 2021, 30(4): 20-25.
|
| [16] |
ZHANG Q, CHEN C, WANG W C, et al. Experimental study on pre-enrichment of thorium minerals by an X-ray sorter[J]. Mining and Metallurgy, 2021, 30(4): 20-25.
|
| [17] |
欧阳健强, 吴富姬, 吴鸿辉, 等. 智能射线矿石分选机在钨矿预处理中的研究与应用[J]. 中国钨业, 2022, 37(1): 67-72, 78.
|
| [18] |
OUYANG J Q, WU F J, WU H H, et al. Research and application of intelligent ray ore separator in tungsten ore pretreatment[J]. China Tungsten Industry, 2022, 37(1): 67-72, 78.
|
| [19] |
刘承帅, 王晓明. 磁选技术应用进展[J]. 现代矿业, 2017, 33(7): 38-44.
|
| [20] |
LIU C S, WANG X M. Application progress of magnetic separation technique[J]. Modern Mining, 2017, 33(7): 38-44.
|
| [21] |
韩跃新, 张小龙, 高鹏, 等. 中国铁矿石选矿技术发展与展望[J]. 金属矿山, 2024, 53(4): 1-24.
|
| [22] |
HAN Y X, ZHANG X L, GAO P, et al. Development and prospect of iron ore processing technologies in China[J]. Metal Mine, 2024, 53(4): 1-24.
|
| [23] |
徐海阳, 王子扬, 韩呈, 等. 磁选工艺自动化现状及展望[J]. 现代矿业, 2023, 39(3): 113-115.
|
| [24] |
XU H Y, WANG Z Y, HAN C, et al. Present situation and prospect of magnetic separation process automation[J]. Modern Mining, 2023, 39(3): 113-115.
|