TiC含量对激光熔覆Fe基复合涂层组织和性能的影响
Effect of TiC content on the microstructure and properties of laser cladding Fe-based composite coatings
采用激光熔覆技术在Mn18Cr2 高锰钢基材上制备了不同TiC 含量的430 铁基复合涂层,研究了TiC 含量对熔覆层组织和性能的影响。试验结果表明,涂层中TiC 颗粒在激光熔覆过程中发生了溶解再析出,再析出的TiC 颗粒呈现出多种形貌,具有不同的形成机制。随着TiC 含量的增加,熔覆层的表面硬度逐步升高,TiC 含量为30% 时涂层磨损体积最小,耐磨性能最好。
TiC-reinforced 430 Fe-based composite coatings were fabricated on Mn18Cr2 high manganese steel using laser cladding, with varying TiC contents to evaluate their influence on microstructural evolution and performance. The experimental results reveal that TiC particles experienced dissolution and re-precipitation during the cladding process, resulting in diverse morphologies governed by distinct formation mechanisms. As the TiC content increased, the surface hardness of the coatings progressively improved. Notably, the coating with 30% TiC achieved the lowest wear volume, demonstrating superior wear resistance.
| [1] |
|
| [2] |
王成, 王伟, 丁士杰, |
| [3] |
|
| [4] |
王强, 杨驹, 牛文娟, |
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
ZHU H, OUYANG M, HU J, |
| [9] |
佘红艳, 屈威, 杨柳, |
| [10] |
|
| [11] |
陈星, 尹健, 皮自强, |
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
陈兴润. 430 铁素体不锈钢板坯组织分析[J]. 冶金分析, 2015, 35(4): 49-53. |
| [16] |
|
| [17] |
|
| [18] |
罗西希. 激光熔覆铁铝基涂层的制备及其增韧和抗磨机理研究[D]. 南京: 南京航空航天大学, 2018. |
| [19] |
|
国家自然科学基金资助项目(52301001)
/
| 〈 |
|
〉 |