钴元素对单晶型 LiNi0.75CoxMn0.25−xO2 正极材料电化学性能的影响

宋顺林 ,  邢博威 ,  王俊 ,  刘亚飞 ,  陈彦彬

矿冶 ›› 2026, Vol. 35 ›› Issue (2) : 313 -319.

PDF (14586KB)
矿冶 ›› 2026, Vol. 35 ›› Issue (2) : 313 -319. DOI: 10.3969/j.issn.1005-7854.2026.02.017
双碳专栏

钴元素对单晶型 LiNi0.75CoxMn0.25−xO2 正极材料电化学性能的影响

作者信息 +

The effect of cobalt element on the electrochemical performance of single-crystal LiNi0.75CoxMn0.25−xO2 cathode materials

Author information +
文章历史 +
PDF (14935K)

摘要

全球钴资源相对匮乏且价格昂贵,因此少钴和无钴化成为锂离子电池三元正极材料的重要发展趋势。三元单晶材料相较于多晶材料晶界更少,并保持了单一颗粒的完整性,因此能够减少循环过程中颗粒开裂、粉化,抑制材料结构相变和产气问题。本文采用高温固相法制备了不同钴含量的单晶型LiNi0.75CoxMn0.25−xO2(x=0、0.03、0.05、0.10、0.15)正极材料,并研究了钴含量对材料结构和电化学性能的影响。采用场发射电子扫描电镜(SEM)、粉末X 射线衍射仪(XRD)以及纽扣电池测试等方法对材料微观形貌、晶体结构和电化学性能进行表征和分析。研究发现,钴元素的摩尔比由0 逐渐增加至15% 时,正极材料的单晶化程度有所提高,晶胞体积逐渐减小,Li+/Ni2+ 阳离子混排现象显著改善;在3.0~4.45 V、0.1 C 倍率条件下,首次放电容量由207.3 mAh · g−1 提升至217.2 mAh · g−1,并且倍率性能明显提升;在25 ℃和45 ℃条件下,循环80 次后的放电容量保持率分别由90.5% 提升至95.7% 和90.2% 提升至93.7%,并且循环前后直流内阻(DCR)增长率均明显减小。低温−20 ℃条件下的放电容量保持率由74.4% 提升至82.7%,DCR 也有明显降低,表明钴元素对提升材料的低温性能具有积极的作用。

Abstract

The global cobalt resources are relatively scarce and expensive, making low-cobalt and cobalt-free designs a crucial development trend for NCM cathode materials in lithium-ion batteries. Single-crystal NCM materials have fewer grain boundaries compared to poly-crystal NCM materials and maintain the integrity of individual particles, thereby reducing particle cracking and pulverization during cycling, as well as suppressing structural phase transitions and gas generation issues. The single-crystal LiNi0.75CoxMn0.25−xO2 (x=0、0.03、 0.05、0.10、0.15) cathode materials with different cobalt contents were synthesized by the high-temperature solid-state reactions and the effects of cobalt contents on the structure and electrochemical performance were investigated. The morphology, crystal structure, and electrochemical performance of the LiNi0.75CoxMn0.25−xO2 materials were analyzed by using FESEM, XRD, and coin cell testing. It is found that as the molar ratio of cobalt increased from 0 to 15%, the degree of single crystallization in the cathode material improved, the unit cell volume gradually decreased, and Li+/Ni2+ cation mixing was significantly reduced. The initial discharge capacity was increased from 207.3 mAh · g−1 to 217.4 mAh ·g−1 at 0.1 C in a voltage range of 3.0–4.45 V, and the rate capability was significantly improved. The discharge capacity retention was increased from 90.5% to 95.7%, and from 90.2% to 93.7% after 80 cycles at 25 and 45 ℃, respectively. Additionally, the DCR growth rate before and after cycling was significantly reduced. The discharge capacity retention at −20 ℃ testing was increased from 74.4% to 82.7%, and the initial DCR at low temperature was decreased, indicating that cobalt plays a positive role in enhancing the low-temperature performance of the material.

关键词

锂离子电池 / 正极材料 / 钴元素 / 单晶 / 阳离子混排 / 低温性能

Key words

lithium-ion battery / cathode materials / cobalt element / single crystal / cation mixing / low-temperature performance

引用本文

引用格式 ▾
宋顺林,邢博威,王俊,刘亚飞,陈彦彬. 钴元素对单晶型 LiNi0.75CoxMn0.25−xO2 正极材料电化学性能的影响[J]. 矿冶, 2026, 35(2): 313-319 DOI:10.3969/j.issn.1005-7854.2026.02.017

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

NAMKOONG B, PARK N Y, PARK G T, et al. High-energy Ni-rich cathode materials for long-range and long-life electric vehicles[J]. Advanced Energy Materials, 2022, 12(21): 2200615.

[2]

HASAN M M, HAQUE R, JAHIRUL M I, et al. Advancing energy storage: The future trajectory of lithium-ion battery technologies[J]. Journal of Energy Storage, 2025, 120: 116511.

[3]

KONZ Z M, WIRTZ B M, VERMA A, et al. High-throughput Li plating quantification for fast-charging battery design[J]. Nature Energy, 2023, 8: 450-461.

[4]

刘通, 杨瑰婷, 毕辉, 等. 高能量密度与高功率密度兼顾型锂离子电池研究现状与展望[J]. 储能科学与技术, 2025, 14(1): 54-76.

[5]

LIU T, YANG G T, BI H, et al. Recent progress in high-energy and high-power lithium-ion batteries[J]. Energy Storage Science and Technology, 2025, 14(1): 54-76.

[6]

MA H L, HE Q, ZHANG F W, et al. Research progress on early warning method and suppression technology of thermal runaway of lithium battery[J]. Journal of Energy Storage, 2025, 119: 116377.

[7]

KAUSHIK S, MEHTA T, CHAND P, et al. Recent advancements in cathode materials for high-performance Li-ion batteries: Progress and prospects[J]. Journal of Energy Storage, 2024, 97: 112818.

[8]

WANG R, WANG L F, FAN Y J, et al. Controversy on necessity of cobalt in nickel-rich cathode materials for lithium-ion batteries[J]. Journal of Industrial and Engineering Chemistry, 2022, 110: 120-130.

[9]

ZHAO X X, RUAN Q X, LI Y L, et al. A modification strategy for synthesizing single-crystal LiNi0.6Co0.2Mn0.2O2 with superior electrochemical performance[J]. Electrochimica Acta, 2025, 526: 146225.

[10]

LI G X, XU R Y, CHU B B, et al. Electrochemical oxygen evolution coupled structure and capacity decay of single-crystal LiNi0.6Co0.2Mn0.2O2 cathode materials[J]. Journal of Power Sources, 2024, 589: 233714.

[11]

WANG J Y, LEI X C, GUO S N, et al. Surface phase engineering stabilizes cycling of zero-cobalt single-crystalline layered cathodes[J]. Nano Energy, 2025, 133: 110500.

[12]

ZHANG R, WANG C Y, ZOU P C, et al. Compositionally complex doping for zero-strain zero-cobalt layered cathodes[J]. Nature, 2022, 610: 67-73.

[13]

YUAN D X, ZHAI H Y, SHEN Y B, et al. Si doping to passivate high-voltage medium-nickel low-cobalt layered oxide cathode reactivity enabling longer life lithium-ion battery[J]. Journal of Energy Storage, 2024, 84: 110944.

[14]

YAN H, LUO Y H, LEI Y, et al. Al/Zr synergetic modification tailored low-cobalt single crystal LiNi0.72Co0.05Mn0.23O2 cathode for high-performance lithium-ion battery[J]. Journal of Alloys and Compounds, 2024, 993: 174564.

[15]

XU M, YIN D M, WANG L M, et al. High valence tungsten doping enhances the lithium storage performance of high-voltage medium-nickel low-cobalt layered oxide cathode[J]. Journal of Energy Storage, 2024, 93: 112279.

[16]

TIAN Y H, LIU Y T, LI F, et al. Realizing high energy-density lithium-ion batteries: High Ni-content or high cut-off voltage of single-crystal layered cathodes?[J]. Journal of Electroanalytical Chemistry, 2022, 924: 116847.

[17]

WANG J, CUI Z Y, WANG C, et al. Understanding Co roles towards developing Li-rich layered oxide cathodes for lithium-ion batteries[J]. Solid State Ionics, 2022, 379: 115912.

[18]

CAO C H, ZHANG J, XIE X H, et al. Composition, structure, and performance of Ni-based cathodes in lithium ion batteries[J]. Ionics, 2017, 23(6): 1337-1356.

[19]

SEUNG T M, KENTAROU I, SHINICHI K, et al. Role of alumina coating on Li―Ni―Co―Mn―O particles as positive electrode material for lithium-ion batteries[J]. Chem. Mater. 2005, 17(14): 3695-3704.

[20]

LIU Q, DU K, GUO H W, et al. Structural and electrochemical properties of Co-Mn-Mg multi-doped nickel based cathode materials LiNi0.9Co0.1−x[Mn1/2Mg1/2]xO2 for secondary lithium ion batteries[J]. Electrochimica Acta, 2013, 90: 350-357.

基金资助

国家重点研发计划项目(2023YFB2503900)

AI Summary AI Mindmap
PDF (14586KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉