In-situ leaching (ISL) has become an important technology for the exploitation of sandstone-hosted uranium deposits because it enables uranium recovery through injection and production wells without conventional excavation of the orebody. The wellfield pattern is the core engineering system that establishes the artificial groundwater flow field, controls lixiviant migration, and determines the effective recovery of uranium-bearing solutions. As ISL development extends toward deeper, lower-permeability, and more heterogeneous sandstone uranium deposits, conventional regular well patterns face increasing difficulties in adapting to variations in orebody geometry, reservoir permeability, single-well injection-production capacity, leaching reactions, and production-induced changes in hydraulic properties. Well-pattern design and optimization have therefore evolved from simple geometric arrangement toward integrated regulation of flow, reaction, and production processes. This review systematically summarizes recent advances in well-pattern design and optimization for in-situ uranium leaching. First, the structural characteristics, applicable conditions, and engineering features of five-spot, seven-spot, and line-drive patterns were compared. Their suitability is shown to depend on orebody geometry, permeability and anisotropy, and sustainable injection-production capacity rather than on geometric configuration alone. Second, progress in well-spacing design and injection-production regulation were reviewed. Existing studies indicate that geometric well spacing cannot fully represent the actual transport and reaction distance in heterogeneous ore-bearing aquifers because identical spacing may correspond to different flow paths, lixiviant travel times, and local fluxes. Well-spacing evaluation should therefore shift toward an effective well spacing jointly constrained by hydraulic connectivity, lixiviant migration time, effective reaction extent, and techno-economic conditions. Injection-production regulation should likewise move from field-scale volumetric balance toward local effective balance at the leaching-unit scale. Third, advances in numerical simulation and optimization were summarized. Groundwater-flow simulation and particle-tracking methods are useful for characterizing hydraulic heads, flow paths, travel times, and capture zones, whereas reactive transport modeling further incorporates aqueous chemistry, mineral reactions, reagent consumption, and uranium migration. More recently, the Fast Marching Method (FMM), streamline-based approaches, clustering, machine-learning surrogate models, and multi-objective optimization have improved the efficiency of candidate-well screening and optimization under geological uncertainty. Meanwhile, field observations and coupled modeling studies increasingly demonstrate that mineral dissolution and precipitation, clay alteration, fine-particle migration, and near-well clogging can modify permeability during production. Such dynamic changes, together with progressive uranium depletion, may cause the initial well pattern to become mismatched with the evolving hydraulic field and residual uranium distribution. Therefore, wellfield optimization should extend from initial static design to production-stage adjustment through flow-rate redistribution, injection-production function conversion, local infill, and model updating constrained by monitoring data. On the basis of these advances, a four-level framework of geometric configuration adaptability–injection-production capacity adaptability–leaching reaction adaptability–production-process dynamic adaptability is proposed for well-pattern design and evaluation. Future research should focus on high-resolution characterization and dynamic updating of reservoir heterogeneity, coupled flow–reaction–permeability evolution, long-term field validation, standardized multi-criteria evaluation, and intelligent dynamic control. These developments are expected to promote the transition of ISL wellfields from geometric coverage-oriented design toward effective leached-volume optimization, and from static initial design toward adaptive, life-cycle wellfield management.
| [1] |
王海峰, 谭亚辉, 杜运斌, 等 . 原地浸出采铀井场工艺[M]. 北京: 冶金工业出版社, 2002: 1-60.
|
| [2] |
Wang Haifeng, Tan Yahui, Du Yunbin . In-situ leaching uranium mining well site technology[M]. Beijing: Metallurgical Industry Press, 2002: 1-60.
|
| [3] |
International Atomic Energy Agency. In situ leach uranium mining: an overview of operations: No. NF-T-1.4[R]. Vienna: IAEA, 2016. (IAEA Nuclear Energy Series No. NF-T-1.4).
|
| [4] |
Mudd G M . Critical review of acid in situ leach uranium mining: 1. USA and Australia[J]. Environmental Geology, 2001, 41(3): 390-403.
|
| [5] |
Bush P D . Development considerations for the Honeymoon ISL uranium project[J]. CIM Bulletin, 2000, 93: 65-73.
|
| [6] |
王海峰, 苏学斌 . 新疆伊宁地浸矿山井场抽注平衡问题的诌议[J]. 铀矿冶, 1999, 18(3): 145-149.
|
| [7] |
Wang Haifeng, Su Xuebin . Discussion of push pull equilibrium in well field at Yining in situ leaching mine, Xinjiang[J]. Uranium Mining and Metallurgy, 1999, 18(3): 145-149.
|
| [8] |
姚益轩 . 原地浸出采铀井型研究[J]. 铀矿冶, 2000, 19(3): 153-160.
|
| [9] |
Yao Yixuan . Study on well patterns of in-situ leaching for uranium mining[J]. Uranium Mining and Metallurgy, 2000, 19(3): 153-160.
|
| [10] |
阙为民 . 原地浸出采铀井网密度的确定[J]. 金属矿山, 2002, 31(4): 17-20.
|
| [11] |
Que Weimin . Determination of well-network density for in-situ uranium leaching[J]. Metal Mine, 2002, 31(4): 17-20.
|
| [12] |
徐强, 雷明信 . 某地浸矿床抽注液井距研究: Visual-MODFLOW在某地浸矿山井距确定中的应用[J]. 中国矿业, 2012, 21(增刊1): 628-630.
|
| [13] |
Xu Qiang, Lei Mingxin . The research on interval between pump and affusion well of insite uranium mine[J]. China Mining Magazine, 2012, 21(S1): 628-630.
|
| [14] |
周义朋, 沈照理, 孙占学, 等 . 应用粒子示踪模拟技术确定地浸采铀溶浸范围[J]. 中国矿业, 2015, 24(2): 117-120.
|
| [15] |
Zhou Yipeng, Shen Zhaoli, Sun Zhanxue, et al. Application study on particle tracer technique to calculate the in-situ leaching area of uranium mining[J]. China Mining Magazine, 2015, 24(2): 117-120.
|
| [16] |
李兵, 郝志华, 陈勇 . 钻孔抽注液量增大对浸出液铀浓度的影响分析[J]. 中国矿业, 2016, 25(增刊2): 286-289.
|
| [17] |
Li Bing, Hao Zhihua, Chen Yong . The effect of the pumping and pouring volume rising on the uranium concentration[J]. China Mining Magazine, 2016, 25(S2): 286-289.
|
| [18] |
张建华, 朱新铖, 史骥 . 某原地浸出铀矿井型及井距优化数值模拟[J]. 金属矿山, 2017, 46(3): 25-30.
|
| [19] |
Zhang Jianhua, Zhu Xincheng, Shi Ji . Optimization numerical simulation on well pattern and well spacing of an in-situ leaching uranium mine[J]. Metal Mine, 2017, 46(3): 25-30.
|
| [20] |
刘正邦, 王海峰, 闻振乾, 等 . 地浸采铀井场溶液运移特征与抽注液量控制研究[J]. 铀矿冶, 2017, 36(1): 23-26, 33.
|
| [21] |
Liu Zhengbang, Wang Haifeng, Wen Zhenqian, et al. Study on the characteristics of solution migration and drawing and injection control at well field in-situ leaching uranium[J]. Uranium Mining and Metallurgy, 2017, 36(1): 23-26, 33.
|
| [22] |
徐强 . 地浸矿山抽注比对溶浸范围影响研究[J]. 铀矿冶, 2017, 36(增刊1): 93-97.
|
| [23] |
王辎鹏 . 可地浸砂岩型铀矿井型井距优化: 以5点型和7点型为例[J]. 西部探矿工程, 2020, 32(9): 171-174.
|
| [24] |
Wang Zipeng . Optimization of well spacing for leachable sandstone type uranium mine: taking 5-point and 7-point patterns as examples[J]. West-China Exploration Engineering, 2020, 32(9): 171-174.
|
| [25] |
常云霞, 谭凯旋, 张翀, 等 . 地浸采铀井场溶浸范围的地下水动力学控制模拟研究[J]. 南华大学学报(自然科学版), 2020, 34(5): 29-36.
|
| [26] |
Chang Yunxia, Tan Kaixuan, Zhang Chong, et al. Simulation study on groundwater dynamics control of leaching range of in-situ uranium well field[J]. Journal of University of South China (Science and Technology), 2020, 34(5): 29-36.
|
| [27] |
霍晨琛, 肖诗伟, 陈帅, 等 . 某地浸铀矿山开采条件下地下水流场特征分析[J]. 铀矿冶, 2022, 41(4): 359-367.
|
| [28] |
Huo Chenchen, Xiao Shiwei, Chen Shuai, et al. Analysis of groundwater flow field characteristics under mining conditions of an in-situ leaching uranium mine[J]. Uranium Mining and Metallurgy, 2022, 41(4): 359-367.
|
| [29] |
吴慧, 罗跃, 李寻, 等 . 利用数值模拟确定地浸采铀过程中溶浸范围[J]. 有色金属(冶炼部分), 2023(4): 28-37.
|
| [30] |
Wu Hui, Luo Yue, Li Xun, et al. Determining the leaching range of in-situ uranium mining by numerical simulation[J]. Nonferrous Metals (Extractive Metallurgy), 2023(4): 28-37.
|
| [31] |
Jia Mingtao, Luo Bosheng, Lu Fang, et al. Improved FMM for well locations optimization in in-situ leaching areas of sandstone uranium mines[J]. Nuclear Engineering and Technology, 2024, 56(9): 3750-3757.
|
| [32] |
Zeng Sheng, Song Jiayin, Sun Bing, et al. Seepage characteristics of the leaching solution during in situ leaching of uranium[J]. Nuclear Engineering and Technology, 2023, 55(2): 566-574.
|
| [33] |
李晓剑, 姜岩, 姚益轩, 等 . 提高地浸采铀钻孔涌水量的技术措施及其应用[J]. 铀矿冶, 2010, 29(2): 57-60, 69.
|
| [34] |
Li Xiaojian, Jiang Yan, Yao Yixuan, et al. Technical measures of reinforcing the discharge of in-situ leaching drillholes and applications[J]. Uranium Mining and Metallurgy, 2010, 29(2): 57-60, 69.
|
| [35] |
Shayakhmetov N M, Alibayeva K A, Kaltayev A, et al. Enhancing uranium in-situ leaching efficiency through the well reverse technique: a study of the effects of reversal time on production efficiency and cost[J]. Hydrometallurgy, 2023, 219: 106086. DOI: 10.1016/j.hydromet.2023.106086.
|
| [36] |
苏学斌, 李喜龙, 刘乃忠, 等 . 一种地浸采铀井网优化重组方法: CN201710059397.5[P]. 2017-07-07.
|
| [37] |
Su Xuebin, Li Xilong, Liu Naizhong, et al. A method for optimization and reconfiguration of an in-situ leaching uranium well pattern: CN201710059397.5[P]. 2017-07-07.
|
| [38] |
Wang Bing, Luo Yue, Qian Jiazhong, et al. Machine learning-based optimal design of the in-situ leaching process parameter (ISLPP) for the acid in-situ leaching of uranium[J]. Journal of Hydrology, 2023, 626: 130234. DOI: 10.1016/j.jhydrol.2023.130234.
|
| [39] |
Qiu Wenjie, Yang Yun, Song Jian, et al. A deep-learning-based multiobjective optimization for the design of in-situ uranium leaching system under multiple uncertainties[J]. Journal of Hydrology, 2025, 651: 132576. DOI: 10.1016/j.jhydrol.2024.132576.
|
| [40] |
Qiu Wenjie, Liu Dianguang, Yang Yun, et al. Integrating deep learning and distance-based clustering to optimize the field scale in situ uranium leaching system in heterogeneous reservoirs[J]. Water Resources Research, 2026, 62(3): e2025WR041741. DOI: 10.1029/2025wr041741.
|
| [41] |
Collet A, Regnault O, Ozhogin A, et al. Three-dimensional reactive transport simulation of uranium in situ recovery: large-scale well field applications in Shu Saryssu Bassin, Tortkuduk deposit (Kazakhstan)[J]. Hydrometallurgy, 2022, 211: 105873. DOI: 10.1016/j.hydromet.2022.105873.
|
| [42] |
Li Zhaokun, Su Xuebin, Jiao Yangquan, et al. A new comprehensive model to simulate and optimize fluid flow in complex well-formation system for in situ leaching uranium[J]. Energy Science & Engineering, 2025, 13(3): 1089-1102.
|
| [43] |
王海峰 . 中国原地浸出采铀发展史——第二部分: 知行合一, 百花齐放[J]. 有色金属(冶炼部分), 2025(12): 221-232.
|
| [44] |
Wang Haifeng . History of in-situ leaching of uranium in China: Part Ⅱ: combine theory with practice, all flowers bloom together[J]. Nonferrous Metals (Extractive Metallurgy), 2025(12): 221-232.
|
| [45] |
姚益轩, 阙为民, 苏学斌, 等 . 地浸采铀工程技术经济分析[J]. 铀矿冶, 1999, 18(4): 230-237.
|
| [46] |
Yao Yixuan, Que Weimin, Su Xuebin, et al. Techno economic analysis for uranium mining by in situ leaching[J]. Uranium Mining and Metallurgy, 1999, 18(4): 230-237.
|
| [47] |
陈梅芳, 苏学斌, 陈箭光, 等 . 基于管状浸出实验的地浸开采井间距研究[J]. 中国矿业, 2021, 30(7): 181-186.
|
| [48] |
Chen Meifang, Su Xuebin, Chen Jianguang, et al. Study on well spacing in in-situ leaching mining based on the tubular leaching experiment[J]. China Mining Magazine, 2021, 30(7): 181-186.
|
| [49] |
阙为民 . 原地浸出采铀地球化学动力学模型研究[J]. 铀矿冶, 2004, 23(1): 1-8.
|
| [50] |
Que Weimin . Geochemical kinetics and mass transport of in-situ leaching of uranium[J]. Uranium Mining and Metallurgy, 2004, 23(1): 1-8.
|
| [51] |
袁新, 周义朋 . 地浸采铀水岩作用数值模拟研究进展[J]. 有色金属(冶炼部分), 2019(1): 53-58.
|
| [52] |
Yuan Xin, Zhou Yipeng . Progress of numerical simulation for water-rock interaction of in-situ uranium leaching[J]. Nonferrous Metals (Extractive Metallurgy), 2019(1): 53-58.
|
| [53] |
吉宏斌, 孙占学, 周义朋, 等 . 不同地浸采铀工艺主要元素迁移强度与饱和状态研究[J]. 原子能科学技术, 2019, 53(8): 1386-1393.
|
| [54] |
Ji Hongbin, Sun Zhanxue, Zhou Yipeng, et al. Research on migration intensity and saturation state of main element in different in-situ leaching of uranium processes[J]. Atomic Energy Science and Technology, 2019, 53(8): 1386-1393.
|
| [55] |
刘石玉, 刘金辉, 周义朋, 等 . 地浸采铀过程中含矿层堵塞特征研究[J]. 有色金属(冶炼部分), 2022(8): 65-75.
|
| [56] |
Liu Shiyu, Liu Jinhui, Zhou Yipeng, et al. Study on characteristics of ore-containing layer blockage during in-situ leaching of uranium mining[J]. Nonferrous Metals (Extractive Metallurgy), 2022(8): 65-75.
|
| [57] |
刘雪峰, 刘金辉, 何挺, 等 . 酸法地浸采铀过程中含矿层渗透性时空演化规律[J]. 有色金属(冶炼部分), 2025(5): 78-88.
|
| [58] |
Liu Xuefeng, Liu Jinhui, He Ting, et al. Spatiotemporal evolution of permeability of ore-bearing layer during acid in-situ leaching of uranium[J]. Nonferrous Metals (Extractive Metallurgy), 2025(5): 78-88.
|
| [59] |
Zhang Chong, Xie Tingting, Tan Kaixuan, et al. Hydrodynamic simulation of the influence of injection flowrate regulation on in-situ leaching range[J]. Minerals, 2022, 12(7): 787. DOI: 10.3390/min12070787.
|
| [60] |
陈梅芳, 贾明涛, 苏学斌, 等 . 基于多源信息融合的地浸采区三维建模与应用研究[J]. 原子能科学技术, 2021, 55(增刊2): 364-372.
|
| [61] |
Chen Meifang, Jia Mingtao, Su Xuebin, et al. Research and application of 3D modeling in in-situ leaching area based on multi-source information fusion[J]. Atomic Energy Science and Technology, 2021, 55(S2): 364-372.
|
| [62] |
王伟豪, 刘金辉, 阳奕汉, 等 . 地浸采铀过程中含矿层渗透性演化的示踪试验[J]. 有色金属(冶炼部分), 2024(2): 72-82.
|
| [63] |
Wang Weihao, Liu Jinhui, Yang Yihan, et al. Tracer test of permeability evolution of ore-bearing layer during in-situ leaching of uranium[J]. Nonferrous Metals (Extractive Metallurgy), 2024(2): 72-82.
|
| [64] |
Harbaugh A W . MODFLOW-2005, the U.S. Geological Survey modular ground-water model: the ground-water flow process[R]. U.S. Geological Survey Techniques and Methods 6-A16, 2005.
|
| [65] |
Bear J. Dynamics of fluids in porous media[M]. New York: Elsevier, 1972.
|
| [66] |
Pollock D W . User guide for MODPATH Version 7: a particle-tracking model for MODFLOW: 2016-1086[R]. U.S. Geological Survey Open-File Report 2016-1086, 2016.
|
| [67] |
王晓东, 吴黎武, 段柏山, 等 . 井间示踪在新疆某地浸采铀中的试验研究[J]. 铀矿冶, 2014, 33(3): 130-133.
|
| [68] |
Wang Xiaodong, Wu Liwu, Duan Baishan, et al. Interwell tracer test in in-situ leaching uranium in one place of Xinjiang[J]. Uranium Mining and Metallurgy, 2014, 33(3): 130-133.
|
| [69] |
Kurmanseiit M B, Tungatarova M S, Royer J J, et al. Streamline-based reactive transport modeling of uranium mining during in-situ leaching: advantages and drawbacks[J]. Hydrometallurgy, 2023, 220: 106107. DOI: 10.1016/j.hydromet.2023.106107.
|
| [70] |
Parkhurst D L, Appelo C A J . Description of input and examples for PHREEQC Version 3: a computer program for speciation, batch-reaction, one-dimensional transport, and inverse geochemical calculations[R]. U.S. Geological Survey Techniques and Methods, Book 6, Chap. A43, 2013.
|
| [71] |
Zheng Chunmiao, WANG P P . MT3DMS: a modular three-dimensional multispecies transport model for simulation of advection, dispersion, and chemical reactions of contaminants in groundwater systems[R]. Vicksburg: U.S. Army Engineer Research and Development Center, 1999.
|
| [72] |
牛庆合, 何佳彬, 王伟, 等 . 基于渗流-化学-应力多场耦合的砂岩型铀矿CO2+O2地浸开采的数值模拟[J]. 有色金属(冶炼部分), 2023(6): 144-152.
|
| [73] |
Niu Qinghe, He Jiabin, Wang Wei, et al. Numerical simulation of CO2+O2 in-situ leaching of sandstone type uranium deposit based on multifield coupling of seepage-chemistry-stress[J]. Nonferrous Metals (Extractive Metallurgy), 2023(6): 144-152.
|
| [74] |
张传飞, 何斌, 骆桂君, 等 . 基于COMSOL+PHREEQC耦合数值模拟的浸出试验: 以内蒙古某铀矿浸出工艺试验为例[J]. 有色金属(冶炼部分), 2025(1): 110-118.
|
| [75] |
Zhang Chuanfei, He Bin, Luo Guijun, et al. Leaching test study based on COMSOL+PHREEQC coupled numerical simulation: a case study of uranium leaching process in Inner Mongolia[J]. Nonferrous Metals (Extractive Metallurgy), 2025(1): 110-118.
|
| [76] |
Macqueen J. Some methods for classification and analysis of multivariate observations[C]// Proceedings of the Fifth Berkeley Symposium on Mathematical Statistics and Probability. Berkeley: University of California Press, 1967: 281-297.
|
| [77] |
Kennedy J, Eberhart R . Particle swarm optimization[C]// Proceedings of ICNN'95-International Conference on Neural Networks. November 27-December 1, 1995, Perth, WA, Australia. IEEE, 1995: 1942-1948.
|
| [78] |
Deb K, Pratap A, Agarwal S, et al. A fast and elitist multiobjective genetic algorithm: NSGA- Ⅱ[J]. IEEE Transactions on Evolutionary Computation, 2002, 6(2): 182-197.
|
| [79] |
Deutsch C V, Journel A G . GSLIB: Geostatistical Software Library and User's Guide[M]. 2nd ed. New York: Oxford University Press, 1998.
|
基金资助
铀资源探采与核遥感全国重点实验室基金项目(NKLUR-2025-ZD-011)