PDF (38960K)
摘要
基于欧拉两相和气泡群平衡流理论模型,通过Fluent 软件建立了富氧侧吹熔池熔炼炉处理铅铋精矿的流体力学稳态及非稳态流动模型,模拟了其连续反应过程中的浓度场和速度场分布,考察了进气速度、进料速度和进气方式在稳态条件下对炉内熔体气相含率及运动速度的影响。研究发现,进气速度的增大有利于提升反应物混合程度,但过高的进气速度会导致反应器内稀相区域过度扩大,并加剧对底层金属层的扰动。提升加料速度能增大气相均匀分布能力并扩大最佳反应区域,然而过高的加料速度会降低熔体澄清分离区域中熔体的运动速度,导致渣与金属无法充分分离。相比于对吹和同侧进气方式,两侧间隔进气的方式可获得氧化炉内熔体气相和澄清分离区域熔体速率的均匀分布。非稳态多相运动模拟表明,改变操作条件反应器在6 s 可达到平衡,说明富氧侧吹熔池熔炼炉内具有良好的传递条件。
Abstract
The traditional pyrometallurgical process of bismuth mainly uses blast furnaces or reverberatory furnaces to carry out precipitation smelting, oxidation smelting or mixed smelting of high-grade bismuth concentrate or bismuth oxide ore. With the consumption of high-grade concentrate resources and increasingly strict environmental protection policies, it is very necessary to adopt cleaner and more energy-efficient oxygen-enriched bath smelting technology to process complex bismuth-containing raw materials. The oxygen-enriched bath smelting technology adds materials containing non-ferrous metals and reactants to a strongly stirred molten pool, which can significantly enhance the smelting process. Based on the Euler-Euler two-phase and bubble group equilibrium flow theory, both steady-state and transient hydrodynamic models of an oxygen-enriched side-blown bath smelting furnace for processing lead-bismuth concentrate were established using Fluent software. The distributions of the concentration field and velocity field during the continuous reaction process were simulated. On this basis, the effects of gas inlet velocity, feeding rate, and gas injection mode on the gas holdup and melt flow velocity inside the furnace under steady-state operating conditions were systematically investigated. The results show that increasing the gas inlet velocity is beneficial for enhancing the mixing intensity of reactants in the molten bath. A higher gas velocity can promote bubble dispersion, strengthen gas-liquid interaction, and improve mass and momentum transfer within the reaction zone. However, an excessively high gas inlet velocity may cause the dilute-phase region inside the reactor to expand excessively. This not only reduces the stability of the multiphase flow structure but also intensifies the disturbance imposed on the bottom metal layer, which may be unfavorable for phase separation and stable furnace operation. The feeding rate also has a significant influence on the internal flow behavior of the furnace. An increase in feeding rate can improve the uniformity of gas-phase distribution and expand the effective reaction region, thereby enhancing the contact between the feed materials and the oxygen-enriched gas. Nevertheless, when the feeding rate becomes too high, the melt velocity in the settling and clarification zone decreases. This weakens the flow conditions required for slag-metal separation and may prevent the slag and metal phases from being sufficiently separated, ultimately affecting product quality and operational efficiency. Among the different gas injection modes, the two-side staggered injection arrangement exhibits better performance than the opposed injection mode and the same-side injection mode. This configuration provides a more uniform distribution of the gas phase in the molten bath and maintains a relatively stable melt velocity in the settling and clarification region. As a result, it is more favorable for improving the overall flow field, enhancing reactant mixing, and ensuring effective separation between slag and metal. Furthermore, the transient multiphase flow simulation indicates that, after the operating conditions are changed, the reactor can reach a new equilibrium state within approximately six seconds. This suggests that the oxygen-enriched side-blown bath smelting furnace possesses favorable transfer characteristics and rapid flow- field response capability. Overall, the simulation results provide a theoretical basis for optimizing the operating parameters and gas injection configuration of oxygen-enriched side-blown bath smelting furnaces used for lead- bismuth concentrate treatment.
关键词
Key words
[Author(id=1330525210680299520, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, orderNo=0, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=114115105@qq.com, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330525210743214082, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525210680299520, language=EN, stringName=Hui Xiao, firstName=Hui, middleName=null, lastName=Xiao, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 Jiangxi Dasanyuan New Materials Engineering Research Co., Ltd. , Yingtan 335400, Jiangxi, China, bio={"content":"Xiao Hui; Tel: +86-18166015158; E-mail: 114115105@qq.com
"}, bioImg=null, bioContent=Xiao Hui; Tel: +86-18166015158; E-mail: 114115105@qq.com
, aboutCorrespAuthor=null), CN=AuthorExt(id=1330525210797740035, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525210680299520, language=CN, stringName=肖辉, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=1, address=1 江西省大三元新材料工程研究有限公司 ,江西 鹰潭 335400, bio={"content":"肖辉(1982-),男,博士,高级工程师
"}, bioImg=null, bioContent=肖辉(1982-),男,博士,高级工程师
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330525210516722682, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, xref=1, ext=[AuthorCompanyExt(id=1330525210529305595, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210516722682, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 Jiangxi Dasanyuan New Materials Engineering Research Co., Ltd. , Yingtan 335400, Jiangxi, China), AuthorCompanyExt(id=1330525210546082812, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210516722682, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=1 江西省大三元新材料工程研究有限公司 ,江西 鹰潭 335400)])]), Author(id=1330525210848071686, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, orderNo=1, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=1770421994@qq.com, emailSecond=null, emailThird=null, correspondingAuthor=1, authorType=1, ext={EN=AuthorExt(id=1330525210915180552, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525210848071686, language=EN, stringName=Peng Chen, firstName=Peng, middleName=null, lastName=Chen, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 School of Metallurgy and Environment, Central South University , Changsha 410083, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330525210965512201, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525210848071686, language=CN, stringName=陈鹏, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 中南大学 冶金与环境学院 , 长沙 410083, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330525210596414461, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, xref=2, ext=[AuthorCompanyExt(id=1330525210613191678, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210596414461, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 School of Metallurgy and Environment, Central South University , Changsha 410083, China), AuthorCompanyExt(id=1330525210629968895, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210596414461, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 中南大学 冶金与环境学院 , 长沙 410083)])]), Author(id=1330525211011649547, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, orderNo=2, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330525211074564109, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525211011649547, language=EN, stringName=Lin Chen, firstName=Lin, middleName=null, lastName=Chen, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 School of Metallurgy and Environment, Central South University , Changsha 410083, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330525211120701454, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525211011649547, language=CN, stringName=陈霖, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 中南大学 冶金与环境学院 , 长沙 410083, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330525210596414461, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, xref=2, ext=[AuthorCompanyExt(id=1330525210613191678, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210596414461, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 School of Metallurgy and Environment, Central South University , Changsha 410083, China), AuthorCompanyExt(id=1330525210629968895, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210596414461, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 中南大学 冶金与环境学院 , 长沙 410083)])]), Author(id=1330525211171033104, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, orderNo=3, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330525211233947666, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525211171033104, language=EN, stringName=Weifeng Liu, firstName=Weifeng, middleName=null, lastName=Liu, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 School of Metallurgy and Environment, Central South University , Changsha 410083, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330525211280085011, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525211171033104, language=CN, stringName=刘伟锋, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 中南大学 冶金与环境学院 , 长沙 410083, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330525210596414461, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, xref=2, ext=[AuthorCompanyExt(id=1330525210613191678, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210596414461, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 School of Metallurgy and Environment, Central South University , Changsha 410083, China), AuthorCompanyExt(id=1330525210629968895, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210596414461, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 中南大学 冶金与环境学院 , 长沙 410083)])]), Author(id=1330525211330416661, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, orderNo=4, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330525211397525527, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525211330416661, language=EN, stringName=Duchao Zhang, firstName=Duchao, middleName=null, lastName=Zhang, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 School of Metallurgy and Environment, Central South University , Changsha 410083, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330525211443662872, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, authorId=1330525211330416661, language=CN, stringName=张杜超, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=2, address=2 中南大学 冶金与环境学院 , 长沙 410083, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330525210596414461, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, xref=2, ext=[AuthorCompanyExt(id=1330525210613191678, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210596414461, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 School of Metallurgy and Environment, Central South University , Changsha 410083, China), AuthorCompanyExt(id=1330525210629968895, tenantId=1045748351789510663, journalId=1327662724377968652, articleId=1330525209476535287, companyId=1330525210596414461, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=2 中南大学 冶金与环境学院 , 长沙 410083)])])]
肖辉,陈鹏,陈霖,刘伟锋,张杜超.
富氧侧吹熔池熔炼炉处理铅铋精矿流体力学模拟研究[J].
有色金属(冶炼部分), 2026, 0(11): 2362-2374 DOI:10.20237/j.issn.1007-7545.2026.11.008
| [1] |
Coursol P, Mackey P J, Kapusta J P T, et al. Energy consumption in copper smelting: a new Asian horse in the race[J]. JOM, 2015, 67(5): 1066-1074.
|
| [2] |
Li Weifeng, Zhan Jing, Fan Yanqing, et al. Research and industrial application of a process for direct reduction of molten high-lead smelting slag[J]. JOM, 2017, 69(4): 784-789.
|
| [3] |
Chen Lin, Yang Tianzu, Bin Shu, et al. An efficient reactor for high-lead slag reduction process: oxygen-rich side blow furnace[J]. JOM, 2014, 66(9): 1664-1669.
|
| [4] |
王成彦, 邵爽, 马保中, 等 . 中国锑铋冶金现状及进展[J]. 有色金属(冶炼部分), 2019(8): 11-17.
|
| [5] |
Wang Chengyan, Shao Shuang, Ma Baozhong, et al. Status and development of antimony and bismuth metallurgy technologies in China[J]. Nonferrous Metals (Extractive Metallurgy), 2019(8): 11-17.
|
| [6] |
Chen Lin, Hao Zhandong, Yang Tianzu, et al. An efficient technology for smelting low grade bismuth-lead concentrate: oxygen-rich side blow process[J]. JOM, 2015, 67(9): 1997-2004.
|
| [7] |
Kuang Shibo, Li Zhaoyang, Yu Aibing . Review on modeling and simulation of blast furnace[J]. Steel Research International, 2018, 89: 1700071. DOI: 10.1002/srin.201700071.
|
| [8] |
王镜淇, 王维, 赵洪亮 . 铅精矿侧吹熔炼气-液多相流动过程数值模拟[J]. 有色金属(冶炼部分), 2024(7): 12-24.
|
| [9] |
Wang Jingqi, Wang Wei, Zhao Hongliang . Numerical simulation of gas-liquid multiphase flow during side blown smelting of lead concentrate[J]. Nonferrous Metals (Extractive Metallurgy), 2024(7): 12-24.
|
| [10] |
陈朝辉, 赵升辉, 赵明杰, 等 . 双侧吹熔池熔炼炉内气液两相流数值模拟[J]. 有色金属(冶炼部分), 2024(12): 8-16.
|
| [11] |
Chen Zhaohui, Zhao Shenghui, Zhao Mingjie, et al. Numerical simulation of gas-liquid two phase flow in a double-side-blown bath smelter[J]. Nonferrous Metals (Extractive Metallurgy), 2024(12): 8-16.
|
| [12] |
Draw M, Rzehak R . Euler-Euler simulation of a bubble column flow up to high gas fraction[J]. International Journal of Multiphase Flow, 2024, 181: 104969. DOI: 10.1016/j.ijmultiphaseflow.2024.104969.
|
| [13] |
Hu Junyi, Yang Shiliang, Wang Hua . VOF study of mesoscale bubble flow dynamics in the side-blown gas-liquid two-phase reactor[J]. Chemical Engineering Journal, 2024, 480: 147983. DOI: 10.1016/j.cej.2023.147983.
|
| [14] |
郭学益, 闫书阳, 王亲猛, 等 . 氧气底吹熔炼氧枪枪位优化[J]. 中国有色金属学报, 2018, 28(12): 2539-2550.
|
| [15] |
Guo Xueyi, Yan Shuyang, Wang Qinmeng, et al. Layout optimization of oxygen lances of oxygen bottom blown furnace[J]. The Chinese Journal of Nonferrous Metals, 2018, 28(12): 2539-2550.
|
| [16] |
Zhang Hongliang, Zhou Chengqian, Bing Wei, et al. Numerical simulation of multiphase flow in a Vanyukov furnace[J]. Journal of the Southern African Institute of Mining and Metallurgy, 2015, 115(5): 457-463.
|
| [17] |
Chen Lin, Chen Wei, Xiao Hui, et al. Oxygen-rich side blow smelting technology-new developments in China[C]// TMS2016. Nashville, TMS. 2016: 123-130.
|
| [18] |
Chen Lin, Bin Wanda, Yang Tianzu, et al. Research and industrial application of oxygen-rich side-blow bath smelting technology[C]// Tao J, Hwang J Y, Mackey P J, et al. TMS Annual Meeting. San Antonio; TMS. 2013: 49-55. DOI: 10.1002/9781118663448.ch7.
|
| [19] |
张乐如 . 现代铅冶金[M]. 长沙: 中南大学出版社, 2013: 189-215.
|
| [20] |
Zhang Leru . Non-ferrous metals library modern lead metallurgy[M]. Changsha: Central South University Press, 2013: 189-215.
|
| [21] |
Bałdyga J, Orciuch W . Barium sulphate precipitation in a pipe: an experimental study and CFD modelling[J]. Chemical Engineering Science, 2001, 56(7): 2435-2444.
|
| [22] |
Coulaloglou C A, Tavlarides L L . Description of interaction processes in agitated liquid-liquid dispersions[J]. Chemical Engineering Science, 1977, 32(11): 1289-1297.
|
| [23] |
Dette H, Studden W J. The theory of canonical moments with applications in statistics, probability, and analysis[M]. New York: John Wiley & Sons, 1997.
|
| [24] |
Ghadiri M, Zhang Z . Impact attrition of particulate solids. Part 1: a theoretical model of chipping[J]. Chemical Engineering Science, 2002, 57(17): 3659-3669.
|
| [25] |
Gordon R G . Error bounds in equilibrium statistical mechanics[J]. Journal of Mathematical Physics, 1968, 9(5): 655-663.
|
| [26] |
Hagesaether L, Jakobsen H A, Svendsen H F . A model for turbulent binary breakup of dispersed fluid particles[J]. Chemical Engineering Science, 2002, 57(16): 3251-3267.
|
| [27] |
Higashitani K O, Yamauchi K, Matsuno Y, et al. Turbulent coagulation of particles dispersed in a viscous fluid[J]. Journal of Chemical Engineering of Japan, 1983, 16(4): 299-304.
|
| [28] |
Hounslow M J, Ryall R L, Marshall V R . A discretized population balance for nucleation, growth, and aggregation[J]. AIChE Journal, 1988, 34(11): 1821-1832.
|
| [29] |
Hsia M A, Tavlarides L L . Simulation analysis of drop breakage, coalescence and micromixing in liquid-liquid stirred tanks[J]. The Chemical Engineering Journal, 1983, 26(3): 189-199.
|
| [30] |
Kostoglou M, Dovas S, Karabelas A J. On the steady-state size distribution of dispersions in breakage processes[J]. Chemical Engineering Science, 1997, 52(8): 1285-1299.
|
| [31] |
Kumar S, Ramkrishna D . On the solution of population balance equations by discretization: I. a fixed pivot technique[J]. Chemical Engineering Science, 1996, 51(8): 1311-1332.
|
| [32] |
Lehr F, Millies M, Mewes D. Bubble-Size distributions and flow fields in bubble columns[J]. AIChE Journal, 2002, 48(11): 2426-2443.
|
| [33] |
Lister J D, Smit D J, Hounslow M J . Adjustable discretized population balance for growth and aggregation[J]. AIChE Journal, 1995, 41(3): 591-603.
|
| [34] |
Luo Hean . Coalescence, breakup and liquid circulation in bubble column reactors[D]. Trondheim: The Norwegian Institute of Technology, 1993.
|
| [35] |
Luo Hean, Svendsen H F . Theoretical model for drop and bubble breakup in turbulent dispersions[J]. AIChE Journal, 1996, 42(5): 1225-1233.
|
| [36] |
Marchisio D L, Vigil R D, Fox R O . Quadrature method of moments for aggregation-breakage processes[J]. Journal of Colloid and Interface Science, 2003, 258(2): 322-334.
|
| [37] |
McCoy B J, Wang Ming . Continuous-mixture fragmentation kinetics: particle size reduction and molecular cracking[J]. Chemical Engineering Science, 1994, 49(22): 3773-3785.
|
| [38] |
McGraw R. Description of aerosol dynamics by the quadrature method of moments[J]. Aerosol Science and Technology, 1997, 27(2): 255-265.
|
| [39] |
Moreno-Atanasio R, Ghadiri M . Mechanistic analysis and computer simulation of impact breakage of agglomerates: effect of surface energy[J]. Chemical Engineering Science, 2006, 61(8): 2476-2481.
|
| [40] |
Pope S B . Probability distributions of scalars in turbulent shear flow[J]. Turbulent Shear Flows, 1979, 2: 7-16.
|
| [41] |
Saffman P G, Turner J S . On the collision of drops in turbulent clouds[J]. Journal of Fluid Mechanics, 1956, 1(1): 16-30.
|
| [42] |
Laakkonen M, Alopaeus V, Aittamaa J. Validation of bubble breakage, coalescence and mass transfer models for gas-liquid dispersion in agitated vessel[J]. Chemical Engineering Science, 2006, 61(1): 218-228.
|
| [43] |
Liao Yixiang, Lucas D. A literature review of theoretical models for drop and bubble breakup in turbulent dispersions[J]. Chemical Engineering Science, 2009, 64(15): 3389-3406.
|
基金资助
湖南省自然科学基金资助项目(2023JJ30667)