废铅酸蓄电池铅膏脱硫工艺研究

谢博毅 ,  周三根 ,  张成毅 ,  程骏 ,  徐骠 ,  王瑞祥

有色金属(冶炼部分) ›› 2026, Vol. 0 ›› Issue (11) : 2474 -2482.

PDF (20469KB)
有色金属(冶炼部分) ›› 2026, Vol. 0 ›› Issue (11) : 2474 -2482. DOI: 10.20237/j.issn.1007-7545.2026.11.017

废铅酸蓄电池铅膏脱硫工艺研究

作者信息 +

Research on Desulfurization Technology of Waste Lead-acid Battery Lead Paste

Author information +
文章历史 +
PDF (20959K)

摘要

随着废铅酸蓄电池报废量持续增长,废铅膏高效回收与绿色预处理成为再生铅冶金领域的研究热点。传统火法熔炼过程易伴随SO2逸散并增加能耗,因此,在进入高温环节前对PbSO4进行湿法转化脱硫具有重要意义。本研究以废铅膏为研究对象,分别采用碳酸铵与碳酸氢铵进行湿法脱硫,系统考察脱硫剂过量系数、液固比、反应温度与反应时间对脱硫率的影响,并通过XRD与SEM对脱硫渣进行物相与形貌表征。结果表明:两种脱硫剂均可促进PbSO4向含碳铅相转化,其中碳酸氢铵的脱硫效果更优;以碳酸铵为脱硫剂时,在过量系数2.5、温度70 ℃、反应时间120 min、液固比8 mL/g的条件下,脱硫率达到96.28%;以碳酸氢铵为脱硫剂时,在过量系数3.0、温度70 ℃、反应时间60 min、液固比10 mL/g的条件下,脱硫率可以达到98.80%;脱硫渣主要由PbCO3、PbO与PbO2构成,表明PbSO4得到有效转化。综合脱硫效率,NH4HCO3更适合作为废铅膏后续资源化利用的绿色预处理策略,为降低高温硫负荷与提高再生铅过程的环境友好性提供试验依据。

Abstract

Lead plays an irreplaceable role in many key industrial fields such as electronics, energy and transportation, and serves as an important strategic nonferrous metal resource. With the depletion of primary lead resources in China, the recycling of secondary lead resources has become the core support for ensuring the sustainable development of the lead industry. Waste lead-acid batteries are important sources of secondary lead. With the continuous increase in the volume of waste lead-acid batteries, the efficient recycling and green pretreatment of waste lead paste have become a key research focus in the field of secondary lead metallurgy. The traditional pyrometallurgical process is prone to the emission of SO2 and increased energy consumption. Therefore, it is of great significance to conduct hydrometallurgical conversion and desulfurization of PbSO4 before the high-temperature treatment stage. In this study, waste lead paste was used as the research object, and ammonium carbonate and ammonium bicarbonate were adopted as desulfurization reagents in the desulfurization process. The effects of desulfurizer excess coefficient, liquid-solid ratio, reaction temperature and reaction time on the desulfurization rate were systematically investigated, and the phase composition and morphology of desulfurization residues were characterized by XRD and SEM. The results show that both desulfurizers can promote the conversion of PbSO4 into carbon-containing lead phases. When ammonium carbonate is used as the desulfurizer, the desulfurization rate reaches 96.28% under the conditions of an excess coefficient of 2.5, a reaction temperature of 70 ℃, a reaction time of 120 min, and a liquid-solid ratio of 8 mL/g. When ammonium bicarbonate is used as the desulfurizer, the desulfurization rate reaches 98.80% under the conditions of an excess coefficient of 3.0, a reaction temperature of 70 ℃, a reaction time of 60 min, and a liquid-solid ratio of 10 mL/g. XRD and SEM-EDS analyses indicate that the two types of desulfurization residues are mainly composed of PbCO3, PbO and PbO2, proving that PbSO4 has been effectively converted. The desulfurization residue prepared with ammonium carbonate as the desulfurizer has a concentrated particle structure, mostly in blocky form with obvious brightness. The desulfurization residue obtained with ammonium bicarbonate as the desulfurizer contains partial flaky and strip-like particles, most of which are small and scattered. Considering the overall desulfurization efficiency, ammonium bicarbonate is more suitable as a green pretreatment strategy for the subsequent resource utilization of waste lead paste. This study provides an experimental basis for reducing the high-temperature sulfur load and improving the environmental friendliness of the secondary lead production process, and also offers a new direction for the subsequent recycling of waste lead paste.

关键词

废铅酸蓄电池 / 脱硫 / 碳酸铵 / 碳酸氢铵 / 资源化利用

Key words

waste lead-acid batteries / desulfurization / ammonium carbonate / ammonium bicarbonate / resource utilization

引用本文

引用格式 ▾
谢博毅,周三根,张成毅,程骏,徐骠,王瑞祥. 废铅酸蓄电池铅膏脱硫工艺研究[J]. 有色金属(冶炼部分), 2026, 0(11): 2474-2482 DOI:10.20237/j.issn.1007-7545.2026.11.017

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

Chen Zhangqing, Huang Kui, Huang Guoliang, et al. A clean process for liquid-phase synthesis of α-PbO based on the selective leaching of lead sulfate from spent lead paste [J]. Journal of Environmental Chemical Engineering, 2024, 12(1): 111826. DOI: 10.1016/j.jece.2023.111826.

[2]

Sun Jinghui, Li Weijun, Yi Jiafei, et al. A novel method for extracting crude Pb from lead-acid battery grid alloy by vacuum distillation[J]. Separation and Purification Technology, 2024, 338: 126559. DOI: 10.1016/j.seppur.2024.126559.

[3]

Ye Longgang, Duan Lianghong, Liu Wei, et al. Facile method for preparing a nano lead powder by vacuum decomposition from spent lead-acid battery paste: leaching and desulfuration in tartaric acid and sodium tartrate mixed lixivium[J]. Hydrometallurgy, 2020, 197: 105450. DOI: 10.1016/j.hydromet.2020.105450.

[4]

He Puqiang, Ouyang Lunao, Yang Yi, et al. Energy-saving recovery of lead from waste lead paste via in-situ hydrometallurgical reduction and electrochemical mechanism[J]. Electrochimica Acta, 2023, 465: 143021. DOI: 10.1016/j.electacta.2023.143021.

[5]

Wang Lei, Xie Feng, Wang Wei, et al. Eco-friendly and efficient strategy for lead recovery from spent lead paste by bagged cathode solid-phase electroreduction[J]. Chemical Engineering Journal, 2023, 473: 145208. DOI: 10.1016/j.cej.2023.145208.

[6]

Tan S Y, Payne D J, Hallett J P, et al. Developments in electrochemical processes for recycling lead-acid batteries[J]. Current Opinion in Electrochemistry, 2019, 16: 83-89.

[7]

Huang Kui, Liu Hengyi, Dong Haili, et al. A novel approach to recover lead oxide from spent lead acid batteries by desulfurization and crystallization in sodium hydroxide solution after sulfation[J]. Resources, Conservation and Recycling, 2021, 167: 105385. DOI: 10.1016/j.resconrec.2020.105385.

[8]

Zhang Wei, Yang Jiakuan, Wu Xu, et al. A critical review on secondary lead recycling technology and its prospect[J]. Renewable and Sustainable Energy Reviews, 2016, 61: 108-122.

[9]

Jin Wei, Ren Hui, Zuo Yongwei, et al. Green and efficient disposal technology and industrial application of waste lead-acid batteries[J]. JOM, 2026, 78(5): 4415-4423.

[10]

Li Jiangmin, Chen Zhengyang, Yu Jiajia, et al. Preparation of lead sulfide-lead carbon black composites by microwave method to improve the electrical properties from recycled lead powder[J]. Journal of Energy Storage, 2022, 52: 104962. DOI: 10.1016/j.est.2022.104962.

[11]

Chen Biao, Cao Jing, Ge Fei, et al. An innovative synergistic recycling route of spent lead paste and lead grid based on sodium nitrate reuse[J]. Journal of Environmental Chemical Engineering, 2022, 10(5): 108454. DOI: 10.1016/j.jece.2022.108454.

[12]

Chen Zhangqing, Huang Kui, Huang Guoliang, et al. A clean process for liquid-phase synthesis of α-PbO based on the selective leaching of lead sulfate from spent lead paste [J]. Journal of Environmental Chemical Engineering, 2024, 12(1): 111826. DOI: 10.1016/j.jece.2023.111826.

[13]

Hua Chunyu, Pan Junqing, Li Zhiyu, et al. A new desulfation process of spent lead paste via cyclic utilization of CO2-NH3·H2O [J]. Journal of Cleaner Production, 2022, 349: 131307. DOI: 10.1016/j.jclepro.2022.131307.

[14]

Yu Wenhao, Ouyang Congrui, Wang Jin, et al. Recovery of high-purity lead sulfate from spent lead paste via a cyclic organic acid utilization process[J]. Separation and Purification Technology, 2026, 382: 135874. DOI: 10.1016/j.seppur.2025.135874.

[15]

Chang Cong, Yang Shenghai, Li Yougang, et al. Green hydrometallurgical extraction of metallic lead from spent lead paste in the methanesulfonic acid system[J]. Separation and Purification Technology, 2023, 306: 4415-4423.

[16]

Huang Yao, Dong Qingyuan, Yu Xi, et al. Recovering metallic lead from spent lead paste by slurry electrolysis[J]. Separation and Purification Technology, 2025, 354: 128789. DOI: 10.1016/j.seppur.2024.128789.

[17]

Wang Hongya, Chen Xiang, Cai Muya, et al. Recycling of lead-acid batteries: a review[J]. Energy Storage Materials, 2026, 85: 104895. DOI: 10.1016/j.ensm.2026.104895.

[18]

李名扬, 梁江北, 梁莎, 等 . 废铅膏电沉积回收铅技术研究进展与展望[J]. 化工进展, 2025, 44(2): 1042-1052.

[19]

Li Mingyang, Liang Jiangbei, Liang Sha, et al. Research progress and prospect on electrowinning recovery of lead from spent lead paste[J]. Chemical Industry and Engineering Progress, 2025, 44(2): 1042-1052.

[20]

刘伟锋, 张坤坤, 邓循博, 等 . 类铝冶金的废铅膏低温还原清洁炼铅的技术思路[J]. 中国有色金属学报, 2019, 29(4): 810-820.

[21]

Liu Weifeng, Zhang Kunkun, Deng Xunbo, et al. Technical idea on lead clean reduction smelting of waste lead paste at low temperature referred to aluminum metallurgy[J]. The Chinese Journal of Nonferrous Metals, 2019, 29(4): 810-820.

[22]

Pan Hengyu, Geng Yong, Dong Huijuan, et al. Sustainability evaluation of secondary lead production from spent lead acid batteries recycling[J]. Resources, Conservation and Recycling, 2019, 140: 13-22.

[23]

Ma Yang, Huang Peizhen, Cao Jing, et al. Analysis of a more sustainable method for recycling waste lead batteries: surface renewal promotes desulfurization agent regeneration[J]. Waste Management, 2022, 137: 319-328.

[24]

Liu Wenke, Qin Qingwei, Li Dengqi, et al. Lead recovery from spent lead acid battery paste by hydrometallurgical conversion and thermal degradation[J]. Waste Management & Research, 2020, 38(3): 263-270.

[25]

Zhang Junfeng, Yi Liang, Yang Liuchun, et al. A new pre-desulphurization process of damped lead battery paste with sodium carbonate based on a "surface update" concept[J]. Hydrometallurgy, 2016, 160: 123-128.

[26]

Yu Wenhao, Zhang Peiyuan, Yang Jiakuan, et al. A low-emission strategy to recover lead compound products directly from spent lead-acid battery paste: key issue of impurities removal[J]. Journal of Cleaner Production, 2019, 210: 1534-1544.

[27]

Ma Bo, Yao Jun, Šolević Knudsen T, et al. Visible light-driven molecular oxygen activation by lead-zinc smelting slag and tartaric acid for efficient organic pollutant degradation and Cr(Ⅵ) reduction[J]. Chemical Engineering Journal, 2024, 494: 152604. DOI: 10.1016/j.cej.2024.152604.

[28]

Pan Zihe, Chen Lin, Cao Chunxia, et al. Optimizing carbonation reaction parameters of calcium carbide slag in acidic/alkaline environment enhancing CO2 mineralization efficiency [J]. Chemical Engineering Journal, 2024, 498: 155587. DOI: 10.1016/j.cej.2024.155587.

基金资助

国家自然科学基金资助项目(52404361)

江西省自然科学基金资助项目(20232BAB214040)

AI Summary AI Mindmap
PDF (20469KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉