聚丙烯基挤出发泡珠粒非对称隔离结构泡沫的制备与电磁屏蔽性能

冯源源 ,  苏耀卓 ,  黄朋科 ,  吴飞 ,  蓝小琴 ,  郑文革

功能高分子学报 ›› 2026, Vol. 39 ›› Issue (5) : 445 -455.

PDF (17763KB)
功能高分子学报 ›› 2026, Vol. 39 ›› Issue (5) : 445 -455. DOI: 10.14133/j.cnki.1008-9357.20260402001
研究论文

聚丙烯基挤出发泡珠粒非对称隔离结构泡沫的制备与电磁屏蔽性能

作者信息 +

Preparation and Electromagnetic Shielding Performance of Polypropylene-Based Asymmetric Segregated Structure Foams Using Extruded Foamed Beads

Author information +
文章历史 +
PDF (18188K)

摘要

采用超临界 CO2 挤出发泡结合模面风冷热切法,制备了 3 种直径的聚丙烯(PP)/聚苯乙烯(PS)复合发泡珠粒,研究了珠粒粒径对隔离结构泡沫电磁屏蔽效能的影响。随后,通过表面浸渍涂覆碳纳米管(CNT)构筑隔离导电网络,并利用环氧树脂辅助热压成型,制备得到轻质隔离结构电磁屏蔽泡沫。探究了 CNT 含量、泡沫压缩比及珠粒粒径对 PP/PS 复合泡沫电磁屏蔽性能的影响。结果表明,增大珠粒粒径有利于在低 CNT 含量下实现更高的电磁屏蔽效能。通过构筑非对称导电网络,显著提升了电磁波入射端与空气界面的阻抗匹配,使泡沫的吸收系数(A)提升至 0.70 以上,形成了以吸收为主的屏蔽机制。均匀导电网络的电导率随 CNT 含量增大、压缩比降低及珠粒粒径增大而提高。本研究为设计低反射、高吸收的轻质电磁屏蔽材料提供了参考。

Abstract

Supercritical CO2 extrusion foaming coupled with air-cooled die-face pelletizing technology was employed to prepare polypropylene (PP)/polystyrene (PS) composite foamed beads with three different diameters. The influence of bead diameter on the electromagnetic shielding effectiveness of isolation structures was investigated. A segregated conductive network was constructed by surface impregnation and coating with carbon nanotubes (CNT), followed by epoxy resin-assisted hot-press molding to obtain a lightweight electromagnetic shielding foam with a segregated structure. The effects of CNT content, compression ratio, and bead diameter on the electromagnetic shielding performance of the PP/PS composite foams were systematically investigated. The results indicate that increasing the diameter of the foamed beads leads to higher shielding effectiveness at lower CNT loadings. By constructing asymmetric conductive network structures, the impedance matching at the air-material interface on the electromagnetic wave incident side was significantly improved. This reduced the reflection coefficient ( R) to 0.29 and increased the absorption coefficient ( A) to above 0.70, successfully achieving an absorption-dominant shielding mechanism. The electrical conductivity of the uniform conductive network increased with increasing CNT content, decreasing compression ratio, and increasing bead size. This study provides valuable guidance for the design of lightweight electromagnetic shielding materials with low reflection and high absorption.

关键词

聚丙烯 / 挤出发泡珠粒 / 非对称隔离结构 / 电磁屏蔽效能 / 超临界二氧化碳

Key words

polypropylene / extruded foamed bead / asymmetric isolated structure / electromagnetic shielding effectiveness / supercritical carbon dioxide

引用本文

引用格式 ▾
冯源源,苏耀卓,黄朋科,吴飞,蓝小琴,郑文革. 聚丙烯基挤出发泡珠粒非对称隔离结构泡沫的制备与电磁屏蔽性能[J]. 功能高分子学报, 2026, 39(5): 445-455 DOI:10.14133/j.cnki.1008-9357.20260402001

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

WEINBRENNER M, WEBER R, NEUMEYER T, ALTSTADT V. Influence of foam density on burning behavior of polymer bead foams [J]. Journal of Applied Polymer Science, 2022, 139(4): 51558.

[2]

KUANG T R, JU J, CHEN F, LIU X H, ZHANG S D, LIU T, PENG X F. Coupled effect of self-assembled nucleating agent, Ni-CNTs and pressure-driven flow on the electrical, electromagnetic interference shielding and thermal conductive properties of poly (lactic acid) composite foams [J]. Composites Science and Technology, 2022, 230: 109736.

[3]

LIU T, FENG H Y, JIN C H, PAWLAK M, SAEB M R, KUANG T R. Green segregated honeycomb biopolymer composites for electromagnetic interference shielding biomedical devices [J]. Chemical Engineering Journal, 2024, 493: 152438.

[4]

HUANG P K, SU Y Z, LUO H B, LAN X Q, CHONG Y K, WU F, ZHENG W G. Facile one-step method to manufacture polypropylene bead foams with outstanding thermal insulation and mechanical properties via supercritical CO2 extrusion foaming [J]. Journal of CO2 Utilization , 2022, 64: 102167.

[5]

LUO H, SU Y, HUANG P, ZHENG H, ZHANG L, WU F, ZHAO Y, WU X, ZHENG W. Development of extruded polystyrene bead foams via supercritical CO2 and secondary foaming technology [J]. Journal of Applied Polymer Science, 2024, 141(38): e55967.

[6]

YANG S L, MA W J, REN X F, HAN D, WANG Z Z, XU D W. Lightweight polyethylene terephthalate bead foams with good interfacial adhesion and thermal insulation performance fabricated by supercritical carbon dioxide secondary foaming strategy [J]. Journal of Applied Polymer Science, 2024, 141(10): e55072.

[7]

ZHENG S, WANG Y, ZHU Y, ZHENG C X. Recent advances in structural design of conductive polymer composites for electromagnetic interference shielding [J]. Polymer Composites, 2024, 45(1): 43-76.

[8]

DUAN H, ZHU H, GAO J, YAN D X, DAI K, YANG Y Q, ZHAO G Z, LIU Y Q, LI Z M. Asymmetric conductive polymer composite foam for absorption dominated ultra-efficient electromagnetic interference shielding with extremely low reflection characteristics [J]. Journal of Materials Chemistry A, 2020, 8(18): 9146-9159.

[9]

ZENG Z, JIN H, CHEN M, LI W, ZHOU L C, XUE X, ZHANG Z. Microstructure design of lightweight, flexible, and high electromagnetic shielding porous multiwalled carbon nanotube/polymer composites [J]. Small, 2017, 13(34): 1701388.

[10]

HU P, LYU J, FU C, GONG W B, LIAO J H, LU W B, CHEN Y P, ZHANG X T. Multifunctional aramid nanofiber/carbon nanotube hybrid aerogel films [J]. ACS Nano, 2020, 14(1): 688-697.

[11]

YANG G Y, WANG S Z, SUN H T, YAO X M, LI C B, LI Y J, JIANG J J. Ultralight, conductive Ti3C2Tx MXene/PEDOT: PSS hybrid aerogels for electromagnetic interference shielding dominated by the absorption mechanism [J]. ACS Applied Materials & Interfaces, 2021, 13(48): 57521-57531.

[12]

DENG Z, TANG P, WU X, ZHANG H B, YU Z Z. Superelastic, ultralight, and conductive Ti3C2Tx MXene/acidified carbon nanotube anisotropic aerogels for electromagnetic interference shielding [J]. ACS Applied Materials & Interfaces, 2021, 13(17): 20539-20547.

[13]

GAO W, ZHAO N, YU T, XI J, MAO A, YUAN M, BAI H, GAO C. High-efficiency electromagnetic interference shielding realized in nacre-mimetic graphene/polymer composite with extremely low graphene loading [J]. Carbon, 2020, 157: 570-577.

[14]

CHEN Y, ZHANG L, MEI C, LI Y, DUAN G, AGARWAL S, GREINER A, MA C, JIANG S. Wood-inspired anisotropic cellulose nanofibril composite sponges for multifunctional applications [J]. ACS Applied Materials & Interfaces, 2020, 12(31): 35513-35522.

[15]

CHEN Y, LUO H, GUO H, LIU K, MEI C, LI Y, DUAN G, HE S, HAN J, ZHENG J, E S, JIANG S. Anisotropic cellulose nanofibril composite sponges for electromagnetic interference shielding with low reflection loss [J]. Carbohydrate Polymers, 2022, 276: 118799.

[16]

YU X, LIANG X, ZHAO T, ZHU P, SUN R, WONG C P. Thermally welded honeycomb-like silver nanowires aerogel backfilled with polydimethylsiloxane for electromagnetic interference shielding [J]. Materials Letters, 2021, 285: 129065.

[17]

MOAZEN S, SAHEBIAN S, HADDAD-SABZEVAR M. Low percolation behavior of HDPE/CNT nanocomposites for EMI shielding application: Random distribution to segregated structure [J]. Synthetic Metals, 2021, 281: 116900.

[18]

MA R Y, YI S Q, LI J, ZHANG J L, SUN W J, JIA L C, YAN D X, LI Z M. Highly efficient electromagnetic interference shielding and superior mechanical performance of carbon nanotube/polydimethylsiloxane composite with interface-reinforced segregated structure [J]. Composites Science and Technology, 2023, 232: 109874.

[19]

WANG G, WANG L, MARK L H, SHAAYEGAN V, WANG G, LI H, ZHAO G, PARK C. Ultralow-threshold and lightweight biodegradable porous PLA/MWCNT with segregated conductive networks for high-performance thermal insulation and electromagnetic interference shielding applications [J]. ACS Applied Materials & Interfaces, 2018, 10(1): 1195-1203.

[20]

JIA X, SHEN B, ZHANG L, ZHENG W. Construction of compressible polymer/MXene composite foams for high-performance absorption-dominated electromagnetic shielding with ultra-low reflectivity [J]. Carbon, 2021, 173: 932-940.

[21]

XUE B, LI Y, CHENG Z, YANG S, XIE L, QIN S, ZHENG Q. Directional electromagnetic interference shielding based on step-wise asymmetric conductive networks [J]. Nano-Micro Letters, 2022, 14(1): 16.

[22]

GU T, ZENG Z, WU S, SUN D X, ZHAO C S, WANG Y. Poly(L-lactic acid)/graphene composite films with asymmetric sandwich structure for thermal management and electromagnetic interference shielding [J]. Chemical Engineering Journal, 2023, 466: 143190.

[23]

PENG Q, MA M, CHEN S, SHI Y, HE H, WANG X. Magnetic-conductive bi-gradient structure design of CP/PGFF/Fe3O4 composites for highly absorbed EMI shielding and balanced mechanical strength [J]. Journal of Materials Science and Technology, 2023, 133: 102-110.

[24]

WU C, ZENG L, CHANG G, ZHOU Y, YAN K, XIE L, XUE B, ZHENG Q. Composite phase change materials embedded into cellulose/polyacrylamide/graphene nanosheets/silver nanowire hybrid aerogels simultaneously with effective thermal management and anisotropic electromagnetic interference shielding [J]. Advanced Composites and Hybrid Materials, 2023, 6(1): 31.

[25]

GUO P, XU Y, LYU M, ZHANG S. Fabrication of expanded ethylene-propylene-butene-1 copolymer bead [J]. Industrial & Engineering Chemistry Research, 2022, 61(6): 2392-2402.

[26]

XUE T, YANG Y, YU D, WALI Q, WANG Z, CAO X, FAN W, LIU T. 3D printed integrated gradient-conductive MXene/CNT/polyimide aerogel frames for electromagnetic interference shielding with ultra-low reflection [J]. Nano-Micro Letters, 2023, 15(1): 45.

[27]

SU Y, HUANG P, LUO H, CHONG Y, ZHAO Q, WU M, ZHENG H, LAN X, WU F, ZHENG W. Supercritical CO2 extrusion foaming and steam-chest molding of polypropylene/thermoplastic polyurethane bead foams [J]. ACS Applied Polymer Materials, 2022, 4(12): 9441-9448.

[28]

LUO J, HUO L, WANG L, HUANG X, LI J, GUO Z, GAO Q, HU M, XUE H, GAO J. Superhydrophobic and multi-responsive fabric composite with excellent electro-photo-thermal effect and electromagnetic interference shielding performance [J]. Chemical Engineering Journal, 2020, 391: 123537.

[29]

ZHANG C W, PENG Y, SONG Y, LI J J, YIN F X, YUAN Y. Periodic three-dimensional nitrogen-doped mesoporous carbon spheres embedded with Co/Co3O4 nanoparticles toward microwave absorption [J]. ACS Applied Materials & Interfaces, 2020, 12(21): 24102-24111.

[30]

SHENG A, REN W, YANG Y, YAN D X, DUAN H, ZHAO G, LIU Y, LI Z M. Multilayer WPU conductive composites with controllable electro-magnetic gradient for absorption-dominated electromagnetic interference shielding [J]. Composites Part A: Applied Science and Manufacturing, 2020, 129: 105692.

基金资助

莆田市科技计划项目(2023GJGZ004)

中国科学院-福建 STS 项目(2024T3042)

AI Summary AI Mindmap
PDF (17763KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉