双网络硅橡胶的制备及其高阻尼抗冲击性能
陈晟 , 于传颂 , 孔令鹏 , 方双辉 , 陈珍明 , 张新星
功能高分子学报 ›› 2026, Vol. 39 ›› Issue (5) : 456 -465.
双网络硅橡胶的制备及其高阻尼抗冲击性能
Preparation of Double-Network Silicone Rubber and Its High-Damping Impact Resistance Performance
聚二甲基硅氧烷(PDMS)的低链间摩擦以及规整的分子结构使其阻尼性能不佳。为提升其能量耗散性能,本文合成了超支化硅氧烷团簇(TC),并以 TC 与羟基封端的聚二甲基硅氧烷(OH-PDMS)为原料制备了聚硼硅氧烷(PBS),进一步与 PDMS 混合,获得了高阻尼抗冲击的双网络硅橡胶。系统研究了 TC 添加量(TC 质量占 OH-PDMS 质量的百分比)、PDMS 与 PBS 网络质量比对双网络硅橡胶的力学性能、流变性能及能量耗散性能的影响。结果表明:当 TC 添加量为 2%、PDMS 与 PBS 网络质量比为 3/7 时,双网络硅橡胶表现出最佳的综合性能,模量随频率增大提升约 10 倍,断裂伸长率达 210%,损耗因数最高达 0.6,且在低频、宽温域(25~125 ℃)条件下阻尼性能保持稳定。本研究为高效抗冲击、宽温域高阻尼弹性体的设计开辟了新途径。
The poor damping performance of polydimethylsiloxane (PDMS), arising from its low interchain friction and regular molecular structure, motivates the improvement of its energy dissipation performance. Herein, hyperbranched siloxane clusters (TC) were synthesized and then used with hydroxyl-terminated polydimethylsiloxane (OH-PDMS) to prepare polyborosiloxane (PBS), which was further blended with PDMS to yield a high-damping,impact-resistant double-network silicone rubber. Effects of the TC addition amount (percentage of TC mass to OH-PDMS mass) and the mass ratio of PDMS to PBS network on the mechanical properties, rheological properties, and energy dissipation performance of the double-network silicone rubber were systematically investigated. When the TC addition amount was 2% and the mass ratio of PDMS to PBS network was 3/7, the double-network silicone rubber exhibited the best overall performance, achieving a modulus increase of up to 10 times under frequency variation, an elongation at break of 210%, and a loss factor up to 0.6. Moreover, its damping performance remained stable over a wide temperature range of 25–125 ℃ under low-frequency conditions, opening a new avenue for the design of highly impact-resistant, high-damping elastomers with a broad temperature window.
| [1] |
LV Y, XU H, XIAO P, ZHANG Z, LI Z, YANG W, LI Y, YU T, LI Q. High-performance bio-based piezoresistive sensors for intelligent impact localization and identification on plant fiber reinforced composite aircraft structures [J]. Chemical Engineering Journal,2026,536:175832. |
| [2] |
WANG P, ZHU R, ZHU X, ZHANG C, |
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
HAO T, HUANG W, GUARíN-ZAPATA N, LUBLIN D, CHEN Y, YU H, SHYAMSUNDER L, ZAVATTIERI P, KISAILUS D. Bioinspired SiC/chitosan impact resistant coatings [J]. Advanced Functional Materials,2025,35(11):2417291. |
| [9] |
WU Q, XIONG H, PENG Y, YANG Y, KANG J, HUANG G, REN X, WU J. Highly stretchable and self-healing “solid-liquid” elastomer with strain-rate sensing capability [J]. ACS Applied Materials & Interfaces,2019,11(21):19534-19540. |
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
LIU R, YAN H, ZHANG Y, YANG K, DU S. Cyanate ester resins containing Si―O―C hyperbranched polysiloxane with favorable curing processability and toughness for electronic packaging [J]. Chemical Engineering Journal,2022,433:133827. |
| [15] |
MA C, QIU S, YU B, WANG J, WANG C, ZENG W, HU Y. Economical and environment-friendly synthesis of a novel hyperbranched poly(aminomethylphosphine oxide-amine) as co-curing agent for simultaneous improvement of fire safety, glass transition temperature and toughness of epoxy resins [J]. Chemical Engineering Journal,2017,322:618-631. |
| [16] |
|
| [17] |
|
| [18] |
|
| [19] |
|
| [20] |
|
| [21] |
|
| [22] |
HOUSSEM L, ÖMER S, |
| [23] |
|
| [24] |
|
| [25] |
|
| [26] |
|
| [27] |
|
| [28] |
|
| [29] |
|
| [30] |
|
国家自然科学基金(52263005,52463004)
/
| 〈 |
|
〉 |