|
[1] 田富竟, 尹自强, 王建敏, 等. 多孔质节流空气静压轴承静态性能实验研究[J]. 航空精密制造技术, 2011, 47(5): 5-8. Tian Fujing, Yin Ziqiang, Wang Jianmin, et al.Experimental research and analysis of aerostatic bearing[J]. Aviation Precision Manufacturing Technology, 2011, 47(5): 5-8(in Chinese). [2] 杜金名, 卢泽生, 孙雅洲. 空气静压轴承各种节流形式的比较[J]. 航空精密制造技术, 2003, 39(6): 4-7, 17. Du Jinming, Lu Zesheng, Sun Yazhou.Comparison of all types of restriction for aerostatic bearings[J]. Aviation Precision Manufacturing Technology, 2003, 39(6): 4-7, 17(in Chinese). [3] 董耀远, 乔志军, 张亮宇, 等. 用于多孔质气体轴承的石墨烯/青铜复合材料的原位制备[J]. 材料导报, 2023, 37(S2): 135-138. Dong Yaoyuan, Qiao Zhijun, Zhang Liangyu, et al.Fabrication of graphene/bronze composites by in situ CVD for porous air bearing[J]. Materials Reports, 2023, 37(S2): 135-138(in Chinese). [4] 吴定柱. 多孔质气体静压止推轴承关键技术研究[D]. 绵阳: 中国工程物理研究院, 2010. Wu Dingzhu.Research on key technology of porous gas hydrostatic thrust bearing[D]. Mianyang: China Academy of Engineering Physics, 2010(in Chinese). [5] 顾延东, Bhle Martin, Schimpf Artur, 等. 多孔质气体静压轴承研究现状及发展趋势[J]. 排灌机械工程学报, 2021, 39(8): 818-825. Gu Yandong, Bhle Martin, Schimpf Artur, et al.Aerostatic bearing with porous restrictor: Research status and future perspectives[J]. Journal of Drainage and Irrigation Machinery Engineering, 2021, 39(8): 818-825(in Chinese). [6] Qiao Z J, Zhou T, Kang J L, et al.Three-dimensional interpenetrating network graphene/copper composites with simultaneously enhanced strength, ductility and conductivity[J]. Materials Letters, 2018, 224: 37-41. [7] 赵乃勤, 郭斯源, 张翔, 等. 基于增强相构型设计的石墨烯/Cu复合材料研究进展[J]. 金属学报, 2021, 57(9): 1087-1106. Zhao Naiqin, Guo Siyuan, Zhang Xiang, et al.Progress on graphene/copper composites focusing on reinforcement configuration design: A review[J]. Acta Metallurgica Sinica, 2021, 57(9): 1087-1106(in Chinese). [8] 管振宏, 于镇洋, 乔志军, 等. 化学气相沉积法制备原位生长三维石墨烯/铜基复合材料[J]. 材料科学与工程学报, 2021, 39(4): 575-579. Guan Zhenhong, Yu Zhenyang, Qiao Zhijun, et al.Preparation of in situ growth three-dimensional Cu@Graphene composite by chemical vapor deposition[J]. Journal of Materials Science and Engineering, 2021, 39(4): 575-579(in Chinese). [9] 吕玉廷, 王立强, 毛建伟, 等. 镍铝青铜合金(NAB)的研究进展[J]. 稀有金属材料与工程, 2016, 45(3): 815-820. Lü Yuting, Wang Liqiang, Mao Jianwei, et al.Recent advances of nickel-aluminum bronze(NAB)[J]. Rare Metal Materials and Engineering, 2016, 45(3): 815-820(in Chinese) [10] Geim A K.Graphene: Status and prospects[J]. Science, 2009, 324(5934): 1530-1534. [11] 屠海令, 赵鸿滨, 魏峰, 等. 二维原子晶体材料及其范德华异质结构研究进展[J]. 稀有金属, 2017, 41(5): 449-465. Tu Hailing, Zhao Hongbin, Wei Feng, et al.Research progress in two-dimensional atomic crystal materials and van der Waals heterostructures[J]. Chinese Journal of Rare Metals, 2017, 41(5): 449-465(in Chinese). [12] Liu Y L, Xie B, Zhang Z, et al.Mechanical properties of graphene papers[J]. Journal of the Mechanics and Physics of Solids, 2012, 60(4): 591-605. [13] Sree Manu K M, Ajay Raag L, Rajan T P D, et al. Self-lubricating bidirectional carbon fiber reinforced smart aluminum composites by squeeze infiltration process[J]. Journal of Materials Science & Technology, 2019, 35(11): 2559-2569. [14] Chen Y K, Zhang X, Liu E Z, et al.Fabrication of three-dimensional graphene/Cu composite by in situ CVD and its strengthening mechanism[J]. Journal of Alloys and Compounds, 2016, 688: 69-76. [15] 王剑, 郭丽娜, 林万明, 等. 石墨烯含量对铜基复合材料的导电、导热、耐腐蚀和力学性能的影响[J]. 新型炭材料, 2019, 34(2): 161-169. Wang Jian, Guo Lina, Lin Wanming, et al.The effects of graphene content on the corrosion resistance, and electrical, thermal and mechanical properties of graphene/copper composites[J]. New Carbon Materials, 2019, 34(2): 161-169(in Chinese). [16] 刘朋, 朱恩福, 闫翠霞, 等. 镍含量对铜基石墨烯复合材料力电性能的影响[J]. 稀有金属, 2018, 42(7): 735-742. Liu Peng, Zhu Enfu, Yan Cuixia, et al.Strength and electrical properties of graphene reinforced copper matrix composites with different nickel contents[J]. Chinese Journal of Rare Metals, 2018, 42(7): 735-742(in Chinese). [17] 徐祥, 宋玲玲, 官雨柔, 等. 石墨烯增强金属基复合材料制备方法的研究进展[J]. 材料热处理学报, 2019, 40(5): 143-149. Xu Xiang, Song Lingling, Guan Yurou, et al.Research pro-gress in preparation of graphene reinforced metal matrix composites[J]. Transactions of Materials and Heat Treatment, 2019, 40(5): 143-149(in Chinese). [18] Li Haipeng, Fan Jiawei, Kang Jianjian, et al.In situ homogeneous synthesis of carbon nanotubes on aluminum matrix and properties of its composites[J]. Transactions of Nonferrous Metals Society of China, 2014,24(7):2331-2336. [19] 李佳慧. 新型自润滑轴承材料的摩擦磨损性能与耐腐蚀性能研究[D]. 邯郸: 河北工程大学, 2023. Li Jiahui.Study on friction and wear properties and corrosion resistance of new self-lubricating bearing materials[D]. Handan: Hebei University of Engineering, 2023(in Chinese). [20] 肖俏, 易晓鸥, 姜波, 等. 石墨烯-铜基复合材料的原位合成制备、组织及性能研究[J]. 矿冶工程, 2017, 37(6): 121-124, 130. Xiao Qiao, Yi Xiaoou, Jiang Bo, et al.Preparation, microstructure and properties of in situ synthesized graphene-copper composite[J]. Mining and Metallurgical Engineering, 2017, 37(6): 121-124, 130(in Chinese). [21] 张晓峰, 路阳, 侯玮杰, 等. 微低重力试验多孔青铜气浮转台研制[J]. 哈尔滨工业大学学报, 2023, 55(1): 82-88. Zhang Xiaofeng, Lu Yang, Hou Weijie, et al.Development of aerostatic rotary table for micro-gravity test based on porous bronze[J]. Journal of Harbin Institute of Technology, 2023, 55(1): 82-88(in Chinese). [22] Xu Z P, Buehler M J.Interface structure and mechanics between graphene and metal substrates: A first-principles study[J]. Journal of Physics: Condensed Matter, 2010, 22(48): 485301. [23] 杨欢, 乔志军, 张志佳, 等. 自支撑三维多孔Cu@SnO2膜电极的制备及储锂性能[J]. 材料工程, 2020, 48(12): 53-59. Yang Huan, Qiao Zhijun, Zhang Zhijia, et al.Preparation and lithium storage properties of free-standing and three-dimensional porous Cu@SnO2 membrane electrode[J]. Journal of Materials Engineering, 2020, 48(12): 53-59(in Chinese). [24] 王兴. 纳米碳增强 B4C/Al层状复合材料力学性能与腐蚀性能研究[D]. 成都: 西南交通大学, 2023. Wang Xing.Study on mechanical properties and corrosion properties of nano-carbon reinforced B4C/Al layered composites[D]. Chengdu: Southwest Jiaotong University, 2023(in Chinese). [25] Prasai D, Tuberquia J C, Harl R R, et al.Graphene: Corrosion-inhibiting coating[J]. ACS Nano, 2012, 6(2): 1102-1108.
|