TBM盘形滚刀静载-高频冲击复合载荷破岩机理与数值模拟研究

郑哲 ,  解洪佳 ,  林赉贶 ,  谢海波 ,  霍军周 ,  姜礼杰 ,  郑永光 ,  杨华勇 ,  韩冬

有色金属(矿山部分) ›› 2026, Vol. 78 ›› Issue (6) : 36 -44.

PDF (2526KB)
有色金属(矿山部分) ›› 2026, Vol. 78 ›› Issue (6) : 36 -44. DOI: 10.20238/j.issn.1671-4172.2026.06.004
TBM专刊

TBM盘形滚刀静载-高频冲击复合载荷破岩机理与数值模拟研究

作者信息 +

Research on rock-breaking mechanism and numerical simulation of TBM disc cutters under static load combined with high-frequency impact

Author information +
文章历史 +
PDF (2586K)

摘要

硬岩隧道掘进机(Tunnel boring machine,TBM)盘型滚刀滚压破岩方式存在破岩效率低、刀具磨损快等问题,直接影响隧道施工的进度、质量与安全。本文提出一种静载-高频冲击复合破岩方法,由静载诱导岩体产生初始损伤与微裂纹,由高频冲击激发劣化岩体裂纹加速扩展与贯通,从而提高滚刀破岩效率。首先从理论层面,基于岩石基本力学特性与压剪、拉伸破坏准则,分析了劣化岩体失稳条件,构建了岩石振动响应模型,并分析了单裂纹与多裂纹形态下劣化岩体振动特性的变化规律。其次从数值模拟层面,基于PFC离散元软件,建立采用平行黏结模型的盘形滚刀破岩数值模型,分别开展静载工况与不同冲击频率、幅值组合工况下的破岩模拟。结果表明,静载-高频冲击复合破岩方式能够显著促进裂纹萌生与贯通,可有效提高破岩效率,具备工程应用潜力。

Abstract

The disc cutters of tunnel boring machines (TBMs) performing rolling cutting mode to breaking the rock. The low rock fragmentation efficiency and severe cutter wear directly affect the efficiency,quality,and safety of tunnels. A static load-high-frequency impact composite rock-breaking method was proposed in this study. First of all,a static load was applied to induce initial damage and microcrack initiation within the rock. Subsequently,the high-frequency impact loading was introduced to excite the deteriorated rock,accelerating the crack propagation and coalescence,thereby improving the rock-breaking efficiency. Theoretically,the instability conditions of deteriorated rock were analyzed based on the fundamental mechanical properties of rock and the compressive-shear and tensile failure criteria. A vibration response model of rock was established,and the vibration characteristics of deteriorated rock containing single and multiple cracks are investigated. Numerically,a disc cutter rock fragmentation model based on the parallel bond model was established in the PFC discrete element framework. Simulations were conducted under conventional static loading and under various combinations of impact frequency and amplitude. The results demonstrated that the static load-high-frequency impact composite rock-breaking method can significantly enhance crack initiation and coalescence,effectively improves rock fragmentation efficiency,and exhibits promising potential for engineering applications.

关键词

硬岩隧道掘进机(TBM) / 复合破岩 / 高频冲击 / 数值模拟

Key words

tunnel boring machine (TBM) / composite rock-breaking / high-frequency impact / numerical simulation

引用本文

引用格式 ▾
郑哲,解洪佳,林赉贶,谢海波,霍军周,姜礼杰,郑永光,杨华勇,韩冬. TBM盘形滚刀静载-高频冲击复合载荷破岩机理与数值模拟研究[J]. 有色金属(矿山部分), 2026, 78(6): 36-44 DOI:10.20238/j.issn.1671-4172.2026.06.004

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

江红祥,杜长龙,刘送永,等 .高压水射流冲击破岩损伤场分析[J].中南大学学报(自然科学版),2015,46(1):287-294.

[2]

Jiang Hongxiang,Du Changlong,Liu Songyong,et al. Numerical analysis on damage field of rock fragmentation with water jet[J]. Journal of Central South University (Science and Technology),2015,46(1):287-294.

[3]

Ling Yuanfei,Wang Xiaoqiang,Tang Jiren,et al. Experimental investigation on rock fragmentation charactersitics of pressurized pulsed water jet[J]. Scientific Reports,2025,15:232. DOI:10.1038/s41598—024—84194—6.

[4]

Xiao Songqiang,Xiao Juchong,Ren Qingyang,et al. Fracture pattern and failure mechanism of sandstone impacted by a high—pressure water jet under different stress loading states[J]. Engineering Fracture Mechanics,2025,320:111068. DOI:10.1016/j.engfracmech.2025.111068.

[5]

Zeng Qi,Yang Xianpeng,Tu Jie,et al. Investigation on rock—breaking and debris transport of high—pressure water jet drilling using the discrete element method (DEM)[J]. Geoenergy Science and Engineering,2025,249:213750. DOI:10.1016/j.geoen.2025.213750.

[6]

Liu Songyong,Li Hongsheng,Chang Huanhuan. Drilling performance of rock drill by high—pressure water jet under different configuration modes[J]. Shock and Vibration,2017,2017:5413823. DOI:10.1155/2017/5413823.

[7]

Ohtani K,Numata D,Takayama K,et al. Experimental study of underwater rock drilling using a pulsed Ho:YAG laser—induced jets[J]. Shock Waves,2009,19(5):403-412.

[8]

张世一,韩彬,李美艳,等 .激光钻井技术研究进展与展望[J].石油机械,2016,44(7):7-11.

[9]

Zhang Shiyi,Han Bin,Li Meiyan,et al. Research progress and prospect on laser drilling technology[J]. China Petroleum Machinery,2016,44(7):7-11.

[10]

Rui Fuxin,Zhao Gaofeng. Experimental and numerical investigation of laser—induced rock damage and the implications for laser—assisted rock cutting[J]. International Journal of Rock Mechanics and Mining Sciences,2021,139:104653. DOI:10.1016/j.ijrmms.2021.104653.

[11]

Meisels R,Toifl M,Hartlieb P,et al. Microwave propagation and absorption and its thermo—mechanical consequences in heterogeneous rocks[J]. International Journal of Mineral Processing,2015,135:40-51.

[12]

Lu Gaoming,Feng Xiating,Li Yuanhui,et al. Experimental investigation on the effects of microwave treatment on basalt heating,mechanical strength,and fragmentation[J]. Rock Mechanics and Rock Engineering,2019,52(8):2535-2549.

[13]

Wiercigroch M,Wojewoda J,Krivtsov A M. Dynamics of ultrasonic percussive drilling of hard rocks[J]. Journal of Sound and Vibration,2005,280(3/4/5):739-757.

[14]

Zhang Ruocheng,Huang Zhanfang,Zhang Zengzeng,et al. Research on rock breaking mechanism of PDC cutter under the action of ultrasonic vibration[J]. PLoS One,2024,19(12):e0308491. DOI:10.1371/journal.pone.0308491.

[15]

Zhou Yu,Lv Wenjun,Zhang Cheng,et al. Novel hard rock breaking technique using ultra—high—frequency particle impact induced by ultrasonic vibration field[J]. Energy,2024,288:129747. DOI:10.1016/j.energy.2023.129747.

[16]

Li He,Shen Yi,Wang Qingchuan,et al. A piezoelectric—driven rock—drilling device for extraterrestrial subsurface exploration[J]. Shock and Vibration,2018,2018:8368012. DOI:10.1155/2018/8368012.

[17]

Li Xuan,Lucas M,Harkness P. Full and half—wavelength ultrasonic percussive drills[J]. IEEE Transactions on Ultrasonics,Ferroelectrics,and Frequency Control,2018,65(11):2150-2159.

[18]

李夕兵,左宇军,马春德 .动静组合加载下岩石破坏的应变能密度准则及突变理论分析[J].岩石力学与工程学报,2005,24(16):2814-2824.

[19]

Li Xibing,Zuo Yujun,Ma Chunde. Failure criterion of strain energy density and catastrophe theory analysis of rock subjected to static—dynamic coupling loading[J]. Chinese Journal of Rock Mechanics and Engineering,2005,24(16):2814-2824.

[20]

Gong Fengqiang,Li Xibing,Liu Xiling,et al. Experimental study of dynamic characteristics of sandstone under one—dimensional coupled static and dynamic loads[J]. Chinese Journal of Rock Mechanics and Engineering,2010,29(10):2076-2085.

[21]

Zhu J J,Li X B,Gong F Q,et al. Dynamic characteristics and damage model for rock under uniaxial cyclic impact compressive loads[J]. Chinese Journal of Geotechnical Engineering,2013,35(3):531-539.

[22]

赵伏军,李夕兵,冯涛,等 .动静载荷耦合作用下岩石破碎理论分析及试验研究[J].岩石力学与工程学报,2005,24(8):1315-1320.

[23]

Zhao Fujun,Li Xibing,Feng Tao,et al. Theoretical analysis and experiments of rock fragmentation under coupling dynamic and static loads[J]. Chinese Journal of Rock Mechanics and Engineering,2005,24(8):1315-1320.

[24]

Zhao F,Wang H,Peng Y,et al. Experimental research on acoustic emission energy and rock crushing effect under static—dynamic coupling loading[J]. Chinese Journal of Rock Mechanics and Engineering,2012,31(7):1363-1368.

[25]

Xia Yimin,Shi Yupeng,Lin Laikuang,et al. Experimental evaluation of fragments from TBM disc cutting under different load cases[J]. Periodica Polytechnica Civil Engineering,2018. DOI:10.3311/ppci.11961.

[26]

谭青,劳同炳,张桂菊,等 .静载与冲击加载方式下滚刀破岩特性[J].中南大学学报(自然科学版),2018,49(1):101-108.

[27]

Tan Qing,Lao Tongbing,Zhang Guiju,et al. Disc cutter cutting mechanism under static loading and impact dynamic loading conditions[J]. Journal of Central South University (Science and Technology),2018,49(1):101-108.

[28]

张桂菊,谭青,劳同炳 .不同动静载荷组合作用下盘形滚刀破岩机制[J].中南大学学报(自然科学版),2019,50(3):540-549.

[29]

Zhang Guiju,Tan Qing,Lao Tongbing. Disc cutter cutting mechanism under different combined dynamic and static loading conditions[J]. Journal of Central South University (Science and Technology),2019,50(3):540-549.

[30]

Zhang Qinglong,Zhu Yanwen,Du Canxun,et al. Dynamic rock—breaking process of TBM disc cutters and response mechanism of rock mass based on discrete element[J]. Advances in Civil Engineering,2022,2022:1917836. DOI:10.1155/2022/1917836.

基金资助

应急管理部重点科技计划项目(2025EMST130301)

应急管理部重点科技计划项目(261111220600)

应急管理部重点科技计划项目(52105072)

AI Summary AI Mindmap
PDF (2526KB)

5

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉