金属矿山深部 TBM 工程掘采协同一体化设计研究
Research on the integrated design of excavation and mining coordination in deep TBM engineering of metal mines
针对金属矿山深部TBM 开拓工程掘进线路、断面、与钻爆法协同作业等关键问题,开展TBM 工程掘采协同一体化设计研究。分析影响因素,明确与传统钻爆法施工的不同,提出金属矿山深部TBM 开拓工程设计原则。以某矿山新扩建矿区深部开拓工程为例,分析矿山矿体条件、工程地质、现有工程系统、TBM 设备参数、相关规范等,制定深部TBM 开拓工程掘采协同一体化设计方案,包含掘进线路、断面、与钻爆法协同作业:详述掘进路线分段情况及各分段的坡度、转弯角度、转弯半径等参数,并分析布设原因;对比Ф5.0 m 与Ф5. 3 m 两种不同断面开挖直径下的开挖量、铺底高度、建设工期、适用性等多项指标,并分析优缺点;与钻爆法协同,详述工程中涉及到与钻爆法协同施工内容安排、施工协同时序及具体协同方案。研究为后续金属矿山TBM 开拓工程设计或优化提供借鉴。
Research on the integrated design of TBM engineering excavation and mining collaboration was carried out to address key issues such as the excavation route, cross-section, and coordinated operation with drilling and blasting methods in deep TBM development projects of metal mines. By analyzing influencing factors and identifying differences from conventional drill-and-blast techniques,the research established design principles for deep TBM development projects in metal mines. Taking a newly expanded deep-level mining area as a case study,it evaluated geological conditions,engineering geology,existing infrastructure,TBM equipment parameters,and relevant standards to develop an integrated design scheme for TBM excavation and mining. The scheme covered excavation routes,cross-sections,and coordination with drill-and-blast methods:detailed descriptions include segmented route planning,gradient,turning angles,and turning radii,along with explanations for their layout rationale. It compared multiple indicators-such as excavation volume,invert height,construction duration,and applicability-for two different tunnel diameters (Ф5.0 m and Ф5. 3 m),analyzing their respective advantages and disadvantages. Furthermore,it specified the layout schemes,construction sequences and collaborative strategies for the combination of TBM and drill-and-blast methods. This research provided valuable references for future design and optimization of TBM-based development projects in metal mines.
| [1] |
李夕兵,黄麟淇,周健, |
| [2] |
|
| [3] |
蔡美峰 .深部开采围岩稳定性与岩层控制关键理论和技术[J].采矿与岩层控制工程学报,2020,2(3):1-9. |
| [4] |
|
| [5] |
蔡美峰,薛鼎龙,任奋华 .金属矿深部开采现状与发展战略[J].工程科学学报,2019,41(4):417-426. |
| [6] |
|
| [7] |
杨小聪,蒋合国 .新质生产力引领深部金属矿山安全高效开采:以毛坪铅锌矿深部开采实践为例[J].中国矿业,2024,33(5):9-21. |
| [8] |
|
| [9] |
黄丹,杨小聪,陈何 .TBM在地下金属矿山应用中的发展现状与趋势[J].有色金属工程,2019,9(11):108-121. |
| [10] |
|
| [11] |
李玉选,郭红斌,黄丹, |
| [12] |
|
| [13] |
李勇,陈虎忠,朱航宇, |
| [14] |
|
| [15] |
王少锋,孙立成,周子龙, |
| [16] |
|
| [17] |
刘泉声,潘玉丛,余宏淦, |
| [18] |
|
| [19] |
黄建鑫 .TBM在某金属矿山长距离井巷掘进中的应用[J].现代矿业,2023,39(7):205-209. |
| [20] |
|
| [21] |
刘福春,郭钦鹏,熊有为 .金属矿山深部硬岩矿床非爆连续采矿技术及应用[J].有色金属(矿山部分),2024,76(6):64—69,83. |
| [22] |
|
| [23] |
翟强,顾伟红 .硬岩隧道掘进机滚刀破岩性能评价研究[J].水资源与水工程学报,2020,31(5):225-234. |
| [24] |
|
| [25] |
乔世范,王超,刘红中, |
| [26] |
|
| [27] |
巩江峰,王伟,周俊超 .截止2021年底中国铁路盾构及TBM隧道统计与分析[J].铁道标准设计,2022,66(3):1-5. |
| [28] |
|
| [29] |
程志,陈虎忠,刘文学, |
| [30] |
|
| [31] |
杨小聪,黄丹,岳小磊, |
| [32] |
|
| [33] |
GB 16423—2020金属非金属矿山安全规程[S]. |
| [34] |
GB 16423—2020 Safety regulation for metal and nonmetal mines[S]. |
| [35] |
路振刚,王建华,朱安平, |
| [36] |
|
新疆维吾尔自治区重点研发计划项目(2024B03014)
/
| 〈 |
|
〉 |