基于三周期极小曲面结构的金属增材制造技术研究进展

曾敏 ,  傅定发 ,  滕杰 ,  蒋福林

安徽工业大学学报(自然科学版) ›› 2026, Vol. 43 ›› Issue (5) : 511 -521.

PDF (6818KB)
安徽工业大学学报(自然科学版) ›› 2026, Vol. 43 ›› Issue (5) : 511 -521. DOI: 10.12415/j.issn.1671−7872.26119
智能冶金与先进材料 • 先进金属材料设计与制造专刊

基于三周期极小曲面结构的金属增材制造技术研究进展

作者信息 +

Research Progress on Metal Additive Manufacturing Technology Based on Triply Periodic Minimal Surface Structures

Author information +
文章历史 +
PDF (6981K)

摘要

随着航空航天、生物医用、热管理及轻量化承载等领域对复杂多孔金属构件需求的不断增长,三周期极小曲面 (TPMS) 结构因兼具低密度、高比强度、优异的能量吸收能力及良好的可设计性,已成为金属增材制造领域的研究热点。本文遵循“结构设计–增材制造工艺–性能研究”的逻辑主线,系统综述相关研究进展。首先概述 TPMS 结构的基本特征与典型构型,分析均匀、梯度和混合等设计方式对其性能的调控作用;其次归纳 Ti−6Al−4V、316L 不锈钢、AlSi10Mg 铝合金及镍基合金等材料体系,以及选区激光熔化、选区激光烧结和电子束粉末床熔融等主流增材制造技术的应用现状;最后从力学性能、渗透性能与生物性能、热管理性能三个方面评述金属 TPMS 结构的性能特征。总体而言,该结构通过几何参数与工艺参数的协同优化,可实现承载、吸能、传质及换热等多功能集成。然而,当前研究仍面临成形缺陷、尺寸偏差、粉末残留及性能预测不足等挑战。未来需进一步揭示结构参数、制造缺陷与服役性能之间的内在关联,以提升性能预测精度、制造一致性和工程应用可靠性。

Abstract

With the growing demand for complex porous metal components in fields such as aerospace, biomedical engineering, thermal management, and lightweight load-bearing applications, triply periodic minimal surface (TPMS) structures have emerged as a critical research focus in metallic additive manufacturing, owing to their advantages of low density, high specific strength, excellent energy absorption capacity, and high design flexibility. A systematic review was presented following the logical framework of “ structural design-additive manufacturing processes-performance studies”. First, the basic characteristics and typical configurations of TPMS structures are outlined, and the design approaches of uniform, graded, and hybrid structures, together with their effects on structural performance, are analyzed. Second, the applications of material systems including Ti−6Al−4V, 316L stainless steel, AlSi10Mg aluminum alloy, and nickel-based alloys, as well as major additive manufacturing technologies including selective laser melting, selective laser sintering, and electron beam powder bed fusion, are summarized. Finally, the performance characteristics of metallic TPMS structures are reviewed in terms of mechanical properties, permeability and biological properties, and thermal management performance. Overall, metallic TPMS structures can achieve the integration of multiple functions, including load bearing, energy absorption, mass transfer, and heat transfer, through the synergistic optimization of geometric and process parameters. However, current studies still face challenges such as forming defects, dimensional deviations, powder entrapment, and limitations in performance prediction. Future research should further reveal the intrinsic relationships among structural parameters, manufacturing defects, and service performance to improve the accuracy of performance prediction, manufacturing consistency, and engineering reliability of metallic TPMS structures.

关键词

三周期极小曲面 / 金属增材制造 / 力学性能 / 渗透性能 / 热管理 / 成形质量

Key words

triply periodic minimal surface / metallic additive manufacturing / mechanical properties / permeability / thermal management / forming quality

引用本文

引用格式 ▾
曾敏,傅定发,滕杰,蒋福林. 基于三周期极小曲面结构的金属增材制造技术研究进展[J]. 安徽工业大学学报(自然科学版), 2026, 43(5): 511-521 DOI:10.12415/j.issn.1671−7872.26119

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

CHEN L Y, LIANG S X, LIU Y, et al. Additive manufacturing of metallic lattice structures: unconstrained design, accurate fabrication, fascinated performances, and challenges[J]. Materials Science and Engineering: R: Reports, 2021, 146: 100648.

[2]

段晟昱, 王潘丁, 刘畅, 等. 增材制造三维点阵结构设计、优化与性能表征方法研究进展[J]. 航空制造技术, 2022, 65(14): 36−48,57.

[3]

DUAN S Y, WANG P D, LIU C, et al. Research progress on design, optimization and performance characterization methods of additively manufactured three—dimensional lattice structures[J]. Aeronautical Manufacturing Technology, 2022, 65(14): 36−48,57.

[4]

LI Y, JIANG D, ZHAO R, et al. High mechanical performance of lattice structures fabricated by additive manufacturing[J]. Metals, 2024, 14(10): 1165.

[5]

MIAO X, HU J, XU Y, et al. Review on mechanical properties of metal lattice structures[J]. Composite Structures, 2024, 342: 118267.

[6]

FENG J, FU J, YAO X, et al. Triply periodic minimal surface(TPMS) porous structures: from multi—scale design, precise additive manufacturing to multidisciplinary applications[J]. International Journal of Extreme Manufacturing, 2022, 4(2): 022001.

[7]

HOSSAIN M S, HOSSAIN M M, NILUFAR S. An overview of additive manufacturing of triply periodic minimal surface structures[J]. Polymers, 2025, 17(24): 3307.

[8]

LI J, WANG L, HE X, et al. Additively manufactured metallic TPMS lattice structures: design strategies, fabrication, multifunctional properties, and applications[J]. npj Advanced Manufacturing, 2025, 2: 45.

[9]

张云龙, 刘德宝, 任晓雪, 等. 基于 TPMS 结构设计的钛合金增材制造技术的研究进展[J]. 聊城大学学报 (自然科学版), 2025, 38(6): 918-926.

[10]

ZHANG Y L, LIU D B, REN X X, et al. Research progress on titanium alloy additive manufacturing technology based on TPMS structural design[J]. Journal of Liaocheng University (Natural Science Edition), 2025, 38(6): 918-926.

[11]

黄心语, 汤华远, 王磊, 等. 基于增材制造的三周期极小曲面结构关键力学性能研究进展[J]. 力学学报, 2024, 56(11): 3099-3115.

[12]

HUANG X Y, TANG H Y, WANG L, et al. Research progress on key mechanical properties of triply periodic minimal surface structures based on additive manufacturing[J]. Chinese Journal of Theoretical and Applied Mechanics, 2024, 56(11): 3099-3115.

[13]

AHMAD S Z, MASOOD M H, KHATTAB M U, et al. Recent developments in novel TPMS lattice materials: design optimization, performance control, and applications in biomimetic scaffolds[J]. Materials, 2025, 18(22): 5209.

[14]

RIVA L, GINESTRA P S, CERETTI E. Mechanical characterization and properties of laser—based powder bed—fused lattice structures: a review[J]. The International Journal of Advanced Manufacturing Technology, 2021, 113: 649-671.

[15]

KAUR I, SINGH P. Critical evaluation of additively manufactured metal lattices for viability in advanced heat exchangers[J]. International Journal of Heat and Mass Transfer, 2021, 168: 120858.

[16]

AMARA K, SAGHIR M Z, ABDELJABAR R. Review of triply periodic minimal surface (TPMS) structures for cooling heat sinks[J]. Energies, 2025, 18(18): 4920.

[17]

李明, 张乘虎, 扈婧乔, 等. 多孔模型设计方法[J]. 图学学报, 2022, 43(6): 1037-1047.

[18]

LI M, ZHANG C H, HU J Q, et al. Design methods of porous models[J]. Journal of Graphics, 2022, 43(6): 1037-1047.

[19]

闫鑫, 田李昊, 彭昊, 吕琳. 三周期极小曲面结构设计及应用综述[J]. 计算机辅助设计与图形学学报, 2023, 35(3): 329-340.

[20]

YAN X, TIAN L H, PENG H, LYU L. Review on design and application of triply periodic minimal surface structures[J]. Journal of Computer—Aided Design & Computer Graphics, 2023, 35(3): 329-340.

[21]

AL−KETAN O, ROWSHAN R, ABU AL−RUB R K. Topology—mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials[J]. Additive Manufacturing, 2018, 19: 167-183.

[22]

FISHER J W, MILLER S W, BARTOLAI J, et al. Catalog of triply periodic minimal surfaces, equation—based lattice structures, and their homogenized property data[J]. Data in Brief, 2023, 49: 109311.

[23]

XU Y, PAN H, WANG R, et al. New families of triply periodic minimal surface—like shell lattices[J]. Additive Manufacturing, 2023, 77: 103779.

[24]

TENG F, SUN Y, GUO S, et al. Topological and mechanical properties of different lattice structures based on additive manufacturing[J]. Micromachines, 2022, 13(7): 1017.

[25]

MASKERY I, AREMU A O, PARRY L, et al. Effective design and simulation of surface—based lattice structures featuring volume fraction and cell type grading[J]. Materials & Design, 2018, 155: 220-232.

[26]

AL−KETAN O, LEE D W, ROWSHAN R, et al. Functionally graded and multi—morphology sheet TPMS lattices: design, manufacturing, and mechanical properties[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 102: 103520.

[27]

ZHANG J, XIE S, LI T, et al. A study of multi—stage energy absorption characteristics of hybrid sheet TPMS lattices[J]. Thin—Walled Structures, 2023, 190: 110989.

[28]

ZHAO M, LI X, ZHANG D Z, et al. TPMS—based interpenetrating lattice structures: design, mechanical properties and multiscale optimization[J]. International Journal of Mechanical Sciences, 2023, 244: 108092.

[29]

CHEN Z, WU B, CHEN X, et al. Energy absorption and impact resistance of hybrid triply periodic minimal surface(TPMS) sheet—based structures[J]. Materials Today Communications, 2023, 37: 107352.

[30]

ZHANG X, YAN S, XIE X, et al. Multi—dimensional hybridized TPMS with high energy absorption capacity[J]. International Journal of Mechanical Sciences, 2024, 273: 109244.

[31]

MA Q, ZHANG L, DING J, et al. Elastically—isotropic open—cell minimal surface shell lattices with superior stiffness via variable thickness design[J]. Additive Manufacturing, 2021, 47: 102293.

[32]

MISHRA A K, CHAVAN H, KUMAR A. Effect of cell size and wall thickness on the compression performance of triply periodic minimal surface based AlSi10Mg lattice structures[J]. Thin—Walled Structures, 2023, 193: 111214.

[33]

POLTUE T, KARUNA C, KHRUEADUANGKHAM S, et al. Design exploration of 3D—printed triply periodic minimal surface scaffolds for bone implants[J]. International Journal of Mechanical Sciences, 2021, 211: 106762.

[34]

ZHOU X, JIN Y, DU J. Functionally graded scaffolds with programmable pore size distribution based on triply periodic minimal surface fabricated by selective laser melting[J]. Materials, 2020, 13(21): 5046.

[35]

ACIKGÖZ S, WIGGER C, MERBACH T, et al. Design guidelines for laser powder bed fusion of triply periodic minimal surface structures for applications in smart reactors[J]. Progress in Additive Manufacturing, 2026, 11: 2215-2237.

[36]

VIJAYAVENKATARAMAN S, ZHANG L, ZHANG S, et al. Triply periodic minimal surface sheet scaffolds for tissue engineering applications: an optimization approach toward biomimetic scaffold design[J]. ACS Applied Bio Materials, 2018, 1(2): 259-269.

[37]

WANG S, SHI Z A, LIU L L, et al. The design of Ti6Al4V primitive surface structure with symmetrical gradient of pore size in biomimetic bone scaffold[J]. Materials & Design, 2020, 193: 108830.

[38]

LI Z, LI J, TIAN J, et al. Inverse design of cellular structures with the geometry of triply periodic minimal surfaces using generative artificial intelligence algorithms[J]. Engineering Structures, 2024, 321: 118988.

[39]

尹兴鹏, 李俊豪, 唐新桢, 等. 机器学习辅助的三周期极小曲面结构逆设计研究进展[J]. 钢铁钒钛, 2025, 46(5): 133-144.

[40]

YIN X P, LI J H, TANG X Z, et al. Research progress on machine learning—assisted inverse design of triply periodic minimal surface structures[J]. Iron Steel Vanadium Titanium, 2025, 46(5): 133-144.

[41]

KAN W H, CHIU L N S, LIM C V S, et al. A critical review on the effects of process—induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion[J]. Journal of Materials Science, 2022, 57: 9818-9865.

[42]

LV Y, WANG B, LIU G, et al. Metal material, properties and design methods of porous biomedical scaffolds for additive manufacturing: a review[J]. Frontiers in Bioengineering and Biotechnology, 2021, 9: 641130.

[43]

XU K, CAO J, ZHENG Z, et al. Deformation behavior of Inconel 625 alloy with TPMS structure[J]. Materials, 2025, 18(2): 396.

[44]

SORO N, ATTAR H, WU X, et al. Investigation of the structure and mechanical properties of additively manufactured Ti−6Al−4V biomedical scaffolds designed with a Schwartz primitive unit—cell[J]. Materials Science and Engineering: A, 2019, 745: 195-202.

[45]

ATAEA A, LI Y, BRANDT M, et al. Ultrahigh—strength titanium gyroid scaffolds manufactured by selective laser melting(SLM) for bone implant applications[J]. Acta Materialia, 2018, 158: 354-368.

[46]

MA S, TANG Q, FENG Q, et al. Mechanical behaviours and mass transport properties of bone—mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2019, 93: 158-169.

[47]

MA S, TANG Q, HAN X, et al. Manufacturability, mechanical properties, mass—transport properties and biocompatibility of triply periodic minimal surface(TPMS) porous scaffolds fabricated by selective laser melting[J]. Materials & Design, 2020, 195: 109034.

[48]

FU J, DING J, QU S, et al. Improved light—weighting potential of SS316L triply periodic minimal surface shell lattices by micro laser powder bed fusion[J]. Materials & Design, 2022, 222: 111018.

[49]

SUN Q, SUN J, GUO K, et al. Investigation on mechanical properties and energy absorption capabilities of AlSi10Mg triply periodic minimal surface sheet structures fabricated via selective laser melting[J]. Journal of Materials Engineering and Performance, 2022, 31: 9110-9121.

[50]

FAN X, LI X, ZHANG L, et al. Design, mechanical properties and energy absorption capability of graded—thickness triply periodic minimal surface structures fabricated by selective laser melting[J]. International Journal of Mechanical Sciences, 2021, 204: 106586.

[51]

YANG L, YAN C, CAO W, et al. Compression—compression fatigue behaviour of gyroid—type triply periodic minimal surface porous structures fabricated by selective laser melting[J]. Acta Materialia, 2019, 181: 49-66.

[52]

SINGH S, SHARMA V S, SACHDEVA A. Progress in selective laser sintering using metallic powders: a review[J]. Materials Science and Technology, 2016, 32(8): 760-772.

[53]

MASZYBROCKA J, STWORA A, GAPIŃSKI B, et al. Morphology and surface topography of Ti6Al4V lattice structure fabricated by selective laser sintering[J]. Bulletin of the Polish Academy of Sciences: Technical Sciences, 2017, 65(1): 85-92.

[54]

ATAEA A, LI Y, FRASER D, et al. Anisotropic Ti−6Al−4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications[J]. Materials & Design, 2018, 137: 345-354.

[55]

KHRAPOV D, KOZADAYEVA M, MANABAEV K, et al. Different approaches for manufacturing Ti−6Al−4V alloy with triply periodic minimal surface sheet—based structures by electron beam melting[J]. Materials, 2021, 14(17): 4912.

[56]

POLLEY C, RADLOF W, HAUSCHULZ F, et al. Morphological and mechanical characterisation of three—dimensional gyroid structures fabricated by electron beam melting for the use as a porous biomaterial[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2022, 125: 104882.

[57]

DING J, QU S, ZHANG L, et al. Geometric deviation and compensation for thin—walled shell lattice structures fabricated by high precision laser powder bed fusion[J]. Additive Manufacturing, 2022, 58: 103061.

[58]

IBHADODE O, RISHMAWI I Z, KIRBY M, et al. Topological fidelity of additively manufactured AlSi10Mg gyroid structures[J]. Journal of Manufacturing Processes, 2023, 108: 671-684.

[59]

KELLY C N, KAHRA C, MAIER H J, et al. Processing, structure, and properties of additively manufactured titanium scaffolds with gyroid—sheet architecture[J]. Additive Manufacturing, 2021, 41: 101916.

[60]

KHRAPOV D, PAVELEVA A, KOZADAYEVA M, et al. Trapped powder removal from sheet—based porous structures based on triply periodic minimal surfaces fabricated by electron beam powder bed fusion[J]. Materials Science and Engineering: A, 2023, 862: 144479.

[61]

GÜNTHER F, PILZ S, HIRSCH F, et al. Experimental and numerical characterization of imperfect additively manufactured lattices based on triply periodic minimal surfaces[J]. Materials & Design, 2023, 233: 112197.

[62]

ZHANG L, FEIH S, DAYNES S, et al. Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading[J]. Additive Manufacturing, 2018, 23: 505-515.

[63]

QIU N, WAN Y, SHEN Y, et al. Experimental and numerical studies on mechanical properties of TPMS structures[J]. International Journal of Mechanical Sciences, 2024, 261: 108657.

[64]

RAVICHANDER B B, JAGDALE S H, KUMAR G. Surface morphology, compressive behavior, and energy absorption of graded triply periodic minimal surface 316L steel cellular structures fabricated by laser powder bed fusion[J]. Materials, 2022, 15(23): 8294.

[65]

LASKOWSKA D, SZATKIEWICZ T, BAŁASZ B, et al. Mechanical properties and energy absorption abilities of diamond TPMS cylindrical structures fabricated by selective laser melting with 316L stainless steel[J]. Materials, 2023, 16(8): 3196.

[66]

KHANNA P, SOOD S, MISHRA P, et al. Analysis of compression and energy absorption behaviour of SLM printed AlSi10Mg triply periodic minimal surface lattice structures[J]. Structures, 2024, 64: 106580.

[67]

PARK S Y, KIM K S, ALMANGOUR B, et al. Effect of unit cell topology on the tensile loading responses of additive manufactured CoCrMo triply periodic minimal surface sheet lattices[J]. Materials & Design, 2021, 206: 109778.

[68]

REZAPOURIAN M, JASIUK I, SAARNA M, et al. Selective laser melted Ti6Al4V split—P TPMS lattices for bone tissue engineering[J]. International Journal of Mechanical Sciences, 2023, 251: 108353.

[69]

GANDHI R, SALMI M, ROY B, et al. Multiaxial fatigue behavior of triply periodic minimal surface lattice structures in Ti6Al4V fabricated by laser powder bed fusion under combined axial—torsional loading[J]. Journal of Materials Research and Technology, 2025, 38: 3655-3671.

[70]

DYER K, AMJADI M, SHAO S, et al. Understanding fatigue of additively manufactured TPMS metallic metamaterials: experiments and modeling[J]. Additive Manufacturing, 2025, 111: 104966.

[71]

QIN Y, WANG Q, SHI C, et al. Structural design and performance study of primitive triply periodic minimal surfaces Ti6Al4V biomimetic scaffold[J]. Scientific Reports, 2022, 12: 12759.

[72]

YE J, HE W, WEI T, et al. Mechanical properties directionality and permeability of fused triply periodic minimal surface porous scaffolds fabricated by selective laser melting[J]. ACS Biomaterials Science & Engineering, 2023, 9(8): 5084-5096.

[73]

门玉涛, 汤绍灿, 陈炜, 等. 基于三周期极小曲面法骨小梁支架的设计与性能研究[J]. 生物医学工程学杂志, 2024, 41(3): 584-594.

[74]

MEN Y T, TANG S C, CHEN W, et al. Design and performance study of bone trabecular scaffolds based on triply periodic minimal surface method[J]. Journal of Biomedical Engineering, 2024, 41(3): 584-594.

[75]

张艺海, 商鹏, 马奔原, 等. 径向梯度三周期极小曲面骨小梁支架结构设计与力学性能分析[J]. 中国组织工程研究, 2024, 28(5): 741-746.

[76]

ZHANG Y H, SHANG P, MA B Y, et al. Structural design and mechanical property analysis of radial gradient triply periodic minimal surface trabecular bone scaffolds[J]. Chinese Journal of Tissue Engineering Research, 2024, 28(5): 741-746.

[77]

ATTARZADEH R, ATTARZADEH−NIAKI S H, DUWIG C. Multi—objective optimization of TPMS—based heat exchangers for low—temperature waste heat recovery[J]. Applied Thermal Engineering, 2022, 212: 118448.

[78]

MIN R, WANG Z, YANG H, et al. Heat transfer characterization of waste heat recovery heat exchanger based on flexible hybrid triply periodic minimal surfaces (TPMS)[J]. International Communications in Heat and Mass Transfer, 2024, 157: 107760.

[79]

RENON C, JEANNINGROS X. A numerical investigation of heat transfer and pressure drop correlations in Gyroid and Diamond TPMS—based heat exchanger channels[J]. International Journal of Heat and Mass Transfer, 2025, 239: 126599.

[80]

GAO S, QU S, DING J, et al. Influence of cell size and its gradient on thermo—hydraulic characteristics of triply periodic minimal surface heat exchangers[J]. Applied Thermal Engineering, 2023, 232: 121098.

[81]

YAN K, DENG H, XIAO Y, et al. Influence of polishing process on surface morphology and thermo—hydraulic performance of additively manufactured Gyroid—structured heat exchanger[J]. Applied Thermal Engineering, 2024, 253: 123828.

[82]

LIU C, ZHANG M, BI G, et al. Research on comprehensive heat dissipation characteristics of AlSi7Mg TPMS heat sinks manufactured by laser powder bed fusion[J]. Applied Thermal Engineering, 2025, 261: 124941.

基金资助

国家自然科学基金项目(52574434)

AI Summary AI Mindmap
PDF (6818KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉