矿床成因约束下高砷锡铜矿矿物学基因特性与分选制约研究

冯凯

有色金属(选矿部分) ›› 2026, Vol. 0 ›› Issue (8) : 99 -105.

PDF (6557KB)
有色金属(选矿部分) ›› 2026, Vol. 0 ›› Issue (8) : 99 -105. DOI: 10.20239/j.issn.1671-9492.2026.08.009
基因选矿

矿床成因约束下高砷锡铜矿矿物学基因特性与分选制约研究

作者信息 +

Study on Mineral Genetic Characteristics and Separation Restriction of Arsenic-rich Tin-Copper Ore Under the Constraint of Deposit Genesis

Author information +
文章历史 +
PDF (6714K)

摘要

高砷锡石-硫化物型锡铜共生矿矿物组成复杂、有价矿物嵌布粒度差异大、共生关系紧密, 生产中普遍存在铜精矿中砷超标、铜锡回收率偏低等难题。矿石基因特征受控于矿床成因及多期次成矿演化过程, 是决定矿物嵌布形态、粒度特征、连生关系及矿石可选性的根本内因。本文以该类矿石为研究对象, 采用化学分析、光学显微镜、扫描电镜及矿物自动分析等手段, 查明矿石化学成分与矿物组成, 系统研究黄铜矿、锡石、毒砂的嵌布特征、粒度分布及不同磨矿细度下的解离行为。研究表明, 受岩浆期后热液多阶段成矿作用控制, 各矿物呈现显著差异化基因特征:锡石早于硫化物沉淀, 粒度不均、性脆易过磨;毒砂形成于硫化物早阶段, 晶粒粗大、自形程度高, 与黄铜矿连生较弱、易单体解离;黄铜矿形成于硫化物晚阶段, 受先期矿物空间占据影响呈细粒嵌布, 解离难度大。依据矿床成因主导的矿石基因对选矿的制约机制, 推荐采用一段适度磨矿-优先浮铜抑砷-铜粗精矿再磨再选-尾矿脱硫-脱硫尾矿重选收锡工艺。该工艺契合矿物嵌布特征与解离规律, 可有效实现铜砷分离、减轻锡石过磨、降低微细粒铜损失, 同时为从矿床成因-矿石基因角度研发同类多金属矿选矿工艺提供参考。

Abstract

Arsenic-rich cassiterite-sulfide type copper-tin symbiotic ore is characterized by complex mineral composition, large particle size difference of valuable minerals and close paragenetic relationship. It generally faces prominent problems such as excessive arsenic in copper concentrate and low recovery of copper and tin. Ore genetic characteristics are controlled by deposit genesis and multi-stage metallogenic evolution, which are the fundamental internal factors determining mineral embedding morphology, particle size features, intergrowth relationship and ore processability. Taking this ore as the research object, chemical analysis, optical microscopy, scanning electron microscopy and automatic mineral analysis were adopted to identify the chemical composition and mineral assemblage, and systematically investigated the embedding characteristics, particle size distribution and liberation rules of chalcopyrite, cassiterite and arsenopyrite under different grinding fineness. The results showed that, controlled by multi-stage post-magmatic hydrothermal mineralization, each mineral presented distinctly differentiated genetic characteristics. Cassiterite was deposited earlier than sulfides with uneven particle size and brittle property, which was prone to over-grinding loss. Arsenopyrite was formed in the early sulfide stage with coarse grain size and high euhedral degree;it was weakly intergrown with chalcopyrite and readily liberated. Formed during the late sulfide stage, chalcopyrite occurred as fine grains confined by space occupied by earlier-formed minerals, resulting in poor liberation. According to the mineral processing constraint mechanism dominated by deposit genesis and ore genetic characteristics, a combined flowsheet of moderate primary grinding, preferential copper flotation with arsenic depression, regrinding and re-concentration of copper rough concentrate, tailings desulfurization, and cassiterite recovery by gravity separation from desulfurized tailings was recommended. The flowsheet conforms to mineral embedding characteristics and liberation rules, which can effectively realize copper-arsenic separation, reduce cassiterite over-grinding and decrease fine copper loss. It also provides a reference for developing mineral processing technology of similar polymetallic ores from the perspective of deposit genesis and ore genetic characteristics.

关键词

矿石基因特性 / 矿床成因 / 成矿阶段 / 高砷锡铜矿 / 工艺矿物学

Key words

ore genetic characteristics / deposit genesis / metallogenic stage / arsenic-rich copper-tin ore / process mineralogy

引用本文

引用格式 ▾
冯凯. 矿床成因约束下高砷锡铜矿矿物学基因特性与分选制约研究[J]. 有色金属(选矿部分), 2026, 0(8): 99-105 DOI:10.20239/j.issn.1671-9492.2026.08.009

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

蒋少涌, 赵葵东, 姜海, 等. 中国钨锡矿床时空分布规律、地质特征与成矿机制研究进展[J]. 科学通报, 2020, 65(33): 3730-3745.

[2]

Jiang Shaoyong, Zhao Kuidong, Jiang Hai, et al. Spatiotemporal distribution, geological characteristics and metallogenic mechanism of tungsten and tin deposits in China:an overview[J]. Chinese Science Bulletin, 2020, 65(33): 3730-3745.

[3]

陈郑辉, 王登红, 盛继福, 等. 中国锡矿成矿规律概要[J]. 地质学报, 2015, 89(6): 1026-1037.

[4]

Chen Zhenghui, Wang Denghong, Sheng Jifu, et al. The metallogenic regularity of tin deposits in China[J]. Acta Geologica Sinica, 2015, 89(6): 1026-1037.

[5]

孙传尧, 周俊武, 贾木欣, 等. 基因矿物加工工程研究[J]. 有色金属(选矿部分), 2018(1): 1-7.

[6]

Sun Chuanyao, Zhou Junwu, Jia Muxin, et al. Research on genetic mineral processing engineering[J]. Nonferrous Metals (Mineral Processing Section), 2018(1): 1-7.

[7]

王莉, 陈萍, 姚磊. 我国锡矿资源形势及对策分析[J]. 中国矿业, 2019, 28(11): 44-47.

[8]

Wang Li, Chen Ping, Yao Lei. Analysis of the trend of tin resources in China and its enlightenments[J]. China Mining Magazine, 2019, 28(11): 44-47.

[9]

吕中海, 胡卫波, 张俊, 等. 锡矿石选矿工艺研究现状与进展[J]. 现代矿业, 2009, 25(10): 19-22.

[10]

Lü Zhonghai, Hu Weibo, Zhang Jun, et al. Study status and progress of tin ore dressing process[J]. Modern Mining, 2009, 25(10): 19-22.

[11]

赵春贤, 平福先, 张宁翠, 等. 多金属复杂锡铜硫化矿选矿试验[J]. 现代矿业, 2017, 33(7): 60-62, 65.

[12]

Zhao Chunxian, Ping Fuxian, Zhang Ningcui, et al. Beneficiation test of polymetallic complex tin-copper sulfide ore[J]. Modern Mining, 2017, 33(7): 60-62, 65.

[13]

李伟, 陈敏, 陈月花, 等. 云锡某选矿厂铜锡共生硫化矿铜精矿降砷试验研究[J]. 有色金属(选矿部分), 2016(3): 6-9.

[14]

Li Wei, Chen Min, Chen Yuehua, et al. Arsenic separation experiments on copper-tin symbiotic copper concentrate in a dressing plant of Yunnan tin company[J]. Nonferrous Metals (Mineral Processing Section), 2016(3): 6-9.

[15]

熊玉旺. 云南某锡、铜、砷、银多金属共生硫化矿工艺矿物学研究[J]. 有色金属(选矿部分), 2016(2): 1-8.

[16]

Xiong Yuwang. Study on the process mineralogy of tin, copper, arsenic and silver polymetallic ore deposits in Yunnan[J]. Nonferrous Metals (Mineral Processing Section), 2016(2): 1-8.

[17]

董敬申, 刘全军, 纪慧超, 等. 硫化铜、砷矿物浮选分离的研究进展[J]. 有色金属工程, 2020, 10(7): 74-81.

[18]

Dong Jingshen, Liu Quanjun, Ji Huichao, et al. Research progress on flotation separation of copper sulfide and arsenic sulfide minerals[J]. Nonferrous Metals Engineering, 2020, 10(7): 74-81.

基金资助

云南省科技计划项目(202504BW050001)

AI Summary AI Mindmap
PDF (6557KB)

3

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉