我国选矿摇床智能化技术研究进展
Research Progress on Intelligent Technology for Mineral Processing Shaking Tables in China
选矿摇床是钨、锡、钽铌及伴生细粒金矿等细粒矿物分选的核心重选设备。传统选矿摇床高度依赖人工经验操作, 存在劳动强度大、分选指标稳定性差、矿物易流失等问题。为破解该生产难题, 国内围绕选矿摇床智能化开展了大量研发攻关。国外摇床选矿智能化技术报道不多, 所以本文仅梳理我国选矿摇床智能化技术自主研发成果, 系统总结了国内选矿摇床智能化技术发展现状, 涵盖替代人工目视判矿的矿带图像视觉识别技术、替代手动操作的床面坡度自适应调节及精矿自动截取执行机构、超越人工经验的多控制参数自适应优化算法, 以及巡检、操作一体化选矿机器人四大核心方向, 梳理各类算法、技术特点与应用效果, 最后分析现有技术瓶颈并预判行业发展趋势, 可为国内重选摇床智能化迭代升级提供研究参考。
Shaking tables serve as the core gravity-concentration equipment for the separation of fine-grained minerals including tungsten, tin, tantalum-niobium ores and associated fine-grained gold ores. The operation of traditional shaking tables highly relies on manual experience, which brings problems such as high-intensity labour, poor stability of separation indices and easy loss of minerals. To tackle these production-related difficulties, extensive research and development have been conducted in China targeting the intelligentization of shaking tables. There are few overseas reports on intelligent technologies for shaking-table beneficiation. Therefore, this paper only sorts out the independent research and development achievements of domestic intelligent shaking-table technologies and systematically summarizes their domestic development status. It covers four core research orientations:mineral-belt image visual recognition technology that replaces manual visual ore judgement, actuators for adaptive deck-slope adjustment and automatic concentrate interception to substitute manual operation, multi-control-parameter adaptive optimization algorithms superior to manual experience, and beneficiation robots integrating patrol inspection and operation. This paper organizes various algorithms, technical characteristics and application effects, analyses existing technical bottlenecks and predicts industrial development trends. It can provide research references for the iterative upgrading of intelligent domestic shaking-table equipment for gravity concentration.
| [1] |
孙传尧. 选矿工程师手册, 第 4 册下: 选矿工业实践[M]. 北京: 冶金工业出版社, 2015. |
| [2] |
|
| [3] |
刘惠中. 重选设备在我国金属矿选矿中的应用进展及展望[J]. 有色金属(选矿部分), 2011(增刊1): 18-23. |
| [4] |
Liu Huizhong. Application progress and prospect of gravity separation equipment in metal ore beneficiation in China[J]. Nonferrous Metals (Mineral Processing Section), 2011(S1): 18-23. |
| [5] |
杨文旺, 武涛, 赵玉华, |
| [6] |
|
| [7] |
李正骅. 国外多层摇床研制概况[J]. 国外金属矿选矿, 1975(增刊2): 46-54. |
| [8] |
|
| [9] |
刘惠中, 彭志龙. 选矿摇床的研究现状及发展趋势[J]. 有色金属(选矿部分), 2023(5): 120-126. |
| [10] |
|
| [11] |
张照志, 潘昭帅, 李厚民, |
| [12] |
|
| [13] |
赵继平, 杨文旺, 武涛, |
| [14] |
|
| [15] |
杨文旺, 武涛, 赵玉华, |
| [16] |
|
| [17] |
科技日报. 数字化选矿摇床精准淘“钨”[N/OL].(2025-06-10)[2026-08-02]. https://2fie.jxust.edu.cn/info/1012/34399.htm. |
| [18] |
Science and Technology Daily. Digital mineral processing shaking table for precise tungsten separation[N/OL].(2025-06-10)[2026-08-02]. https://2fie.jxust.edu.cn/info/1012/34399.htm. |
| [19] |
刘惠中, 廖阳, 张云琛, |
| [20] |
|
| [21] |
刘惠中, 邹起华. 基于改进U2-Net 的摇床精矿带图像分割方法[J]. 传感器与微系统, 2025, 44(5): 124-128. |
| [22] |
|
| [23] |
|
| [24] |
和丽芳, 童雄, 黄宋魏. 一种利用矿带图像灰度动态分割摇床矿带的方法: 201210012398. 1[P]. 2012-07-04. |
| [25] |
|
| [26] |
卢明, 覃左栋, 刘黎辉, |
| [27] |
|
| [28] |
赵玉华, 武涛, 杨文旺, |
| [29] |
|
| [30] |
袁明才, 杨文旺, 武涛, |
| [31] |
|
| [32] |
周欣宇, 杨波, 蒋朝辉, |
| [33] |
|
| [34] |
阮顺领, 张一凡, 陈思睿, |
| [35] |
|
| [36] |
戴昊霖, 陈雯, 蒋朝辉, |
| [37] |
|
| [38] |
刘惠中, 游科顺. 基于深度学习边缘检测和Hough 变换的摇床矿物带边界提取和特征表示[J]. 制造业自动化, 2023, 45(6): 180-183, 188. |
| [39] |
|
| [40] |
王锦煜. 摇床矿带识别算法及其应用[D]. 湘潭: 湖南科技大学, 2022. |
| [41] |
|
| [42] |
|
| [43] |
和丽芳, 黄斌, 黄宋魏, |
| [44] |
|
| [45] |
和丽芳, 郭思哲, 黄宋魏, |
| [46] |
|
| [47] |
和丽芳, 郭思哲, 黄宋魏, |
| [48] |
|
| [49] |
刘惠中, 芮作为, 朱合钧, |
| [50] |
|
| [51] |
刘惠中, 刘建业, 黄翱, |
| [52] |
|
| [53] |
邵平, 刘丹, 余龙舟, |
| [54] |
|
| [55] |
浦友尚. 摇床运动参数对流场及分离性能的影响与调控[D]. 昆明: 昆明理工大学, 2021. |
| [56] |
|
| [57] |
刘惠中, 刘紫腾, 廖阳, |
| [58] |
|
| [59] |
刘利敏, 李强, 武涛, |
| [60] |
|
| [61] |
赵玉华, 杨文旺, 武涛, |
| [62] |
|
| [63] |
赵继平, 杨文旺, 武涛, |
| [64] |
|
| [65] |
杨文龙, 吴富姬, 罗璇, |
| [66] |
|
| [67] |
刘建业. 基于机器视觉的选矿摇床控制参数优化策略研究[D]. 赣州: 江西理工大学, 2025. |
| [68] |
|
| [69] |
游科顺. 选矿摇床分选过程模型构建及控制参数优化研究[D]. 赣州: 江西理工大学, 2022. |
| [70] |
|
| [71] |
何微, 戴昊霖, 陈雯. 基于XGBoost 算法的摇床分选指标预测研究[J]. 矿冶工程, 2025, 45(1): 70-75. |
| [72] |
|
| [73] |
|
| [74] |
杨文旺, 何庆浪, 兰希雄, |
| [75] |
|
| [76] |
刘惠中, 邓浩宗. 智能选矿摇床巡检机器人的路径规划[J]. 有色金属( 选矿部分), 2023(2): 133-141. |
| [77] |
|
| [78] |
邹起华. 摇床选矿机器人矿物分带特征提取与机械臂目标识别及控制研究[D]. 赣州: 江西理工大学, 2024. |
| [79] |
|
江西省重点研发计划项目(20212BBE53026)
江西省研究生创新专项资金项目(YC2023-S649)
江西省研究生创新专项资金项目(YC2023-S50)
江西省“双千计划”引进高层次创新人才项目(jxsq2018101046)
/
| 〈 |
|
〉 |