高压进气离心压气机失速特性数值模拟研究

李政君 ,  左志涛 ,  杨宏旻

南京师范大学学报(工程技术版) ›› 2026, Vol. 26 ›› Issue (2) : 1 -8.

PDF (4600KB)
南京师范大学学报(工程技术版) ›› 2026, Vol. 26 ›› Issue (2) : 1 -8. DOI: 10.3969/j.issn.1672-1292.2026.02.0001
动力工程及工程热物理

高压进气离心压气机失速特性数值模拟研究

作者信息 +

Numerical Simulation of Stall Characteristics of High-Pressure Inlet Centrifugal Compressor

Author information +
文章历史 +
PDF (4710K)

摘要

为研究不稳定流动对压气机工作范围的影响,选取一款高压入口离心压气机为研究对象进行相关分析. 该压气机使用闭式叶轮结构,通过 CFX 软件进行数值模拟,研究其在小流量下的失速现象及对性能的影响,探讨在高压入口情况下失速的成因及其在瞬态下的表现. 研究结果表明,失速现象主要由叶片前缘的流动分离所诱发,进而削弱了流道内的流动稳定性. 通过对稳态和瞬态流场的进一步分析,揭示了失速状态下压力波动的非线性特征,得出了失速引发的低频振荡与叶片通过频率之间的关系. 研究结论可为离心压气机的优化设计及性能提升提供理论依据,并为后续失速控制策略的研究奠定基础.

Abstract

To investigate the influence of unsteady flow on the operating range of a centrifugal compressor, a high-pressure inlet centrifugal compressor is selected as the research subject for a detailed analysis. This compressor employs a closed impeller design, and numerical simulations are conducted using CFX to examine the stall phenomenon at low flow rates and its impact on performance. The study explores the causes of stall under high-pressure inlet conditions and its behaviors during transient operations. The results indicate that the stall phenomenon primarily originates from flow separation at the leading edge of the blades, which subsequently affects the stability of the flow within the passage. Further analysis of both steady-state and transient flow fields reveals the nonlinear characteristics of pressure fluctuations during stall conditions, and investigates the relationship between low-frequency oscillations induced by stall and the blade passing frequency. These findings provide a theoretical foundation for optimizing the design of centrifugal compressors and enhancing their performance, while also laying the groundwork for future exploration of stall control strategies.

关键词

离心压气机 / 数值模拟 / 失速特性 / 信号分析

Key words

centrifugal compressor / numerical simulation / stall characteristic / signal analysis

引用本文

引用格式 ▾
李政君,左志涛,杨宏旻. 高压进气离心压气机失速特性数值模拟研究[J]. 南京师范大学学报(工程技术版), 2026, 26(2): 1-8 DOI:10.3969/j.issn.1672-1292.2026.02.0001

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

花严红, 李振, 罗涛. 大流量低转速离心压气机叶轮流场仿真研究[J]. 科学技术创新, 2021(22): 52-53.

[2]

朱智富, 马超, 马朝臣, 等. 小流量下离心压气机流场分析及喘振机理研究[J]. 车用发动机, 2011(2): 37-41.

[3]

杨晰琼, 李杜, 张锦纶, 等. 离心叶轮与径向扩压器非定常干涉效应研究[J]. 风机技术, 2022, 64(3): 17-23.

[4]

Krain H. A CAD method for centrifugal compressor impellers[J]. Journal of Engineering for Gas Turbines and Power, 1984, 106(2): 482-488.

[5]

Krain H. Swirling impeller flow[J]. Journal of Turbomachinery, 1988, 110(1): 122-128.

[6]

钟云红, 刘正先, 李孝检, 等. 离心叶轮失速涡结构演化与耦合特征研究[J]. 推进技术, 2024, 45(4): 96-104.

[7]

Pullan G, Young A, Day I J, et al.. Origins and structure of spike-type rotating stall[J]. Journal of Turbomachinery, 2015, 137(5): 051007.

[8]

Yamada K, Kikuta H, Iwakiri K I, et al.. An explanation for flow features of spike-type stall inception in an axial compressor rotor[J]. Journal of Turbomachinery, 2013, 135(2): 021023.

[9]

Inoue M, Kuroumaru M, Tanino T, et al.. Comparative studies on short and long length-scale stall cell propagating in an axial compressor rotor[J]. Journal of Turbomachinery, 2001, 123(1): 24-30.

[10]

Yamada K, Kikuta H, Furukawa M, et al.. Effects of tip clearance on the stall inception process in an axial compressor rotor[C]// ASME Turbo Expo,Volume 6C:Turbomachinery. San Antonio,Texas,USA, 2013.

[11]

Lin F, Zhang J, Chen J, et al.. Flow structure of short-length-scale disturbance in an axial-flow compressor[J]. Journal of Propulsion and Power, 2008, 24(6): 1301-1308.

[12]

Cumpsty N A. Part-circumference casing treatment and the effect on compressor stall[C]// ASME Turbo Expo,Volume 1: Turbomachinery. Toronto,Ontario,Canada, 1989.

[13]

Hoying D A, Tan C S, Vo H D, et al.. Role of Blade passage flow structures in axial compressor rotating stall inception[J]. Journal of Turbomachinery: 1999, 121(4): 735-742.

[14]

Furukawa M, Inoue M, Saiki K, et al.. The role of tip leakage vortex breakdown in compressor rotor aerodynamics[J]. Journal of Turbomachinery, 1999, 121(3): 469-480.

[15]

Furukawa M,Saiki K,Yamada K, et al. Unsteady flow behavior due to breakdown of tip leakage vortex in an axial compressor rotor at near-stall condition[C]// ASME Turbo Expo,Volume 1:Aircraft Engine;Marine;Turbomachinery;Microturbines and Small Turbomachinery. Munich,Germany, 2000.

[16]

李雯玉, 胡骏. 单级近失速工况全环非定常数值模拟研究[J]. 机械制造与自动化, 2022, 51(2): 87-90,115.

[17]

贺晓亮. 跨音速离心压气机三维流场数值分析[D]. 哈尔滨: 哈尔滨工程大学, 2011.

[18]

Emmons H W, Pearson C E, Grant H P. Compressor surge and stall propagation[J]. Journal of Fluids Engineering, 1955, 77(4): 455-467.

[19]

Sun Z Z, Zou W Z, Zheng X Q. Instability detection of centrifugal compressors by means of acoustic measurements[J]. Aerospace Science and Technology, 2018, 82: 628-635.

[20]

姜椿阳. 压气机失速信号分析[J]. 科技传播, 2016, 8(11): 229-230.

[21]

张英杰, 韩戈, 李庆阔, 等. 超高压比离心压气机失速机理探究[J]. 工程热物理学报, 2022, 43(2): 309-315.

[22]

曲锋. 离心压气机失稳机理及自循环机匣优化设计研究[D]. 哈尔滨: 哈尔滨工程大学, 2023.

[23]

付曦, 刘云, 张俊红, 等. 气流激励下压气机叶片动力学特性分析[J]. 机械设计与制造, 2024(12): 258-263, 269.

基金资助

江苏省碳达峰碳中和科技创新专项资金(重大创新载体建设)项目(BM2022001)

AI Summary AI Mindmap
PDF (4600KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉