双机械臂共形修复系统

蔡李想 ,  谭歆榕 ,  冯春梅 ,  施建平

南京师范大学学报(工程技术版) ›› 2026, Vol. 26 ›› Issue (2) : 30 -37.

PDF (2683KB)
南京师范大学学报(工程技术版) ›› 2026, Vol. 26 ›› Issue (2) : 30 -37. DOI: 10.3969/j.issn.1672-1292.2026.02.004
控制科学与工程

双机械臂共形修复系统

作者信息 +

Dual Robotic Arm Conformal Repair System

Author information +
文章历史 +
PDF (2747K)

摘要

3D 生物打印技术能够精确沉积生物细胞和生物材料,已成为构建生物骨骼、组织和器官的一种前沿方法. 其中,机械臂 3D 打印修复技术对大型动物的长节段骨缺损具有良好的治疗效果. 然而,生物缺损部位表面通常为非平坦结构,这对大部分只能制造水平支架的传统 3D 修复技术构成了重大挑战. 设计一款双机械臂共形修复系统,有效减少修复时间的同时实现破损部位的共形打印,充分提高修复速度与修复质量. 通过在猪胫骨模型上进行修复实验,验证了该方案的可行性,为未来的个性化医疗和组织修复进一步研究提供参考.

Abstract

3D bioprinting technology, which allows for the precise deposition of biological cells and materials, has emerged as a promising method for designing biological scaffolds, tissues, and organs. Among these methods, robotic arm 3D printing repair technology has shown good therapeutic effects for long segmental bone defects in large animals. However, since the surface of biological defects is not flat, this poses a significant challenge to traditional 3D repair techniques, which typically manufacture horizontal scaffolds. Therefore, this paper presents a dual robotic arm conformal repair system that effectively reduces repair time while achieving conformal printing of the defect site. This system significantly improves repair speed and quality. The feasibility of this approach is validated through repair experiments conducted on a pig tibia model, contributing to future research in personalized medicine and tissue repair.

关键词

机械臂修复 / 共形 3D 打印 / 生物打印

Key words

robotic arm repair / conformal 3D printing / bioprinting

引用本文

引用格式 ▾
蔡李想,谭歆榕,冯春梅,施建平. 双机械臂共形修复系统[J]. 南京师范大学学报(工程技术版), 2026, 26(2): 30-37 DOI:10.3969/j.issn.1672-1292.2026.02.004

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

Li L, Shi J P, Ma K W, et al.. Robotic in situ 3D bio-printing technology for repairing large segmental bone defects[J]. Journal of Advanced Research, 2021, 30: 75-84.

[2]

杨继全, 施建平, 翟飞琦, 等. 基于 3D 打印的异质零件的应用[J]. 2022, 51(7): 1-8.

[3]

McCormack A, Highley C B, Leslie N R, et al.. 3D printing in suspension baths: Keeping the promises of bioprinting afloat[J]. Trends in Biotechnology, 2020, 38(6): 584-593.

[4]

Skardal A, Mack D, Kapetanovic E, et al.. Bioprinted amniotic fluid-derived stem cells accelerate healing of large skin wounds[J]. Stem Cells Translational Medicine, 2012, 1(11): 792-802.

[5]

Li L, Yu F, Shi J P, et al.. In situ repair of bone and cartilage defects using 3D scanning and 3D printing[J]. Scientific Reports, 2017, 7(1): 9416.

[6]

Lipskas J, Deep K, Yao W. Robotic-assisted 3D bio-printing for repairing bone and cartilage defects through a minimally invasive approach[J]. Scientific Reports, 2019, 9(1): 3746.

[7]

Bella D C, Duchi S, O'Connell C D, et al.. In situ handheld three-dimensional bioprinting for cartilage regeneration[J]. Journal of Tissue Engineering and Regenerative Medicine, 2018, 12(3): 611-621.

[8]

Amini A R, Laurencin C T, Nukavarapu S P. Bone tissue engineering: Recent advances and challenges[J]. Critical Reviews In Biomedical Engineering, 2012, 40(5): 363-408.

[9]

Ding H Z, Chang R C. Simulating image-guided in situ bioprinting of a skin graft onto a phantom burn wound bed[J]. Additive Manufacturing, 2018, 22: 708-719.

[10]

Ma K W, Zhao T Z, Yang L F, et al.. Application of robotic-assisted in situ 3D printing in cartilage regeneration with HAMA hydrogel: An in vivo study[J]. Journal of Advanced Research, 2020, 23: 123-132.

[11]

Zhou C, Yang Y Z, Wang J X, et al.. Ferromagnetic soft catheter robots for minimally invasive bioprinting[J]. Nature Communications, 2021, 12(1): 5072.

[12]

Zhu Z J, Park H S, Mcalpine M C. 3D printed deformable sensors[J]. Science Advances, 2020, 6(25): aba5575.

[13]

Singh S, Choudhury D, Yu F, et al.. In situ bioprinting: Bioprinting from benchside to bedside?[J]. Acta Biomaterialia, 2020, 101: 14-25.

[14]

Wu Y, Ravnic D J, Ozbolat I T. Intraoperative bioprinting: Repairing tissues and organs in a surgical setting[J]. Trends Biotechnology, 2020, 38(6): 594-605.

[15]

Zhu Z J, Ng D W H, Park H S, et al.. 3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies[J]. Nature Reviews Materials, 2021, 6(1): 27-47.

[16]

Thai M T, Phan P T, Tran H A, et al.. Advanced soft robotic system for in situ 3D bioprinting and endoscopic surgery[J]. Advanced Science, 2023, 10(12): 2205656.

[17]

Kucukdeger E, Johnson B N. Closed-loop controlled conformal 3D printing on moving objects via tool-localized object position sensing[J]. Journal of Manufacturing Processes, 2023, 89: 39-49.

[18]

Uzel S G M, Weeks R D, Eriksson M, et al. Multimaterial multinozzle adaptive 3D printing of soft materials[J]. Advanced Materials Technologies, 2022, 7(8): 2101710.

[19]

Emon O F, Alkadi F, Kiki M, et al.. Conformal 3D printing of a polymeric tactile sensor[J]. Additive Manufacturing Letters, 2022, 2: 100027.

[20]

Ji Z H, Brion D A J, Samson K D G, et al.. Facile method for 3D printing conformally onto uneven surfaces and its application to face masks[J]. Scientific Reports, 2023, 13(1): 21659.

[21]

Chakraborty D, Reddy B A, Choudhury A R. Extruder path generation for curved layer fused deposition modeling[J]. Computer-Aided Design, 2008, 40(2): 235-243.

[22]

吴淑琴. 股骨皮质骨生物力学特性研究[J]. 中北大学学报(自然科学版), 2012, 33(2): 216-220.

[23]

赵宝林, 罗民, 马洪顺. 国人股骨下端松质骨力学性质实验研究[J]. 北京生物医学工程, 2004, 23(2): 143-146.

[24]

董得义, 谢川, 李彦生, 等. 基于 MFC 的 STL 格式数据文件接口问题研讨[J]. 现代制造工程, 2005(5): 53-55.

基金资助

国家自然科学基金项目(52005268)

AI Summary AI Mindmap
PDF (2683KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉