锂离子电池注液量精准控制技术改进及其对电池性能的影响

戴树林

工程设计与施工 ›› 2026, Vol. 8 ›› Issue (1) : 13 -15.

PDF (1123KB)
工程设计与施工 ›› 2026, Vol. 8 ›› Issue (1) : 13 -15. DOI: 10.12349/edc.v8i1.8966

锂离子电池注液量精准控制技术改进及其对电池性能的影响

作者信息 +

Improvement of precise control technology for injection volume of lithium-ion batteries and its impact on battery performance

Author information +
文章历史 +
PDF (1149K)

摘要

注液量精准控制是锂离子电池制造过程中的核心工艺环节,直接决定电池内部离子传输效率、界面稳定性及电化学性能一致性。本文针对传统注液量控制技术存在的精度不足、环境适应性差及工艺适配性低等问题,系统阐述锂离子电池注液工艺的核心要求与控制原理,深入分析注液量与电池内部反应机理的关联性。在此基础上,提出以“动态闭环反馈+多参数协同调控”为核心的注液量精准控制技术改进方案,明确技术改进的核心目标与约束条件,细化关键技术改进细节,并完成改进后控制装置的样机研发。通过性能验证实验,从电化学性能、循环稳定性及工艺适配性等维度,对比分析改进技术与传统技术的差异。实验结果表明,改进后的注液量精准控制技术可有效提升电池的容量一致性、循环寿命及倍率性能,显著增强对不同规格电池及复杂制造环境的适配能力。本文的研究成果为锂离子电池制造过程中注液工艺的优化升级提供重要的技术支撑与理论参考。

Abstract

Precise control of injection volume is a core process in the manufacturing of lithium-ion batteries, which directly determines the internal ion transport efficiency, interface stability, and electrochemical performance consistency of the battery. This article aims to address the problems of insufficient accuracy, poor environmental adaptability, and low process adaptability in traditional injection volume control technology. It systematically elaborates on the core requirements and control principles of lithium-ion battery injection technology, and deeply analyzes the correlation between injection volume and internal reaction mechanism of the battery. On this basis, an improvement plan for precise control technology of injection volume with “dynamic closed-loop feedback+multi parameter collaborative regulation” as the core is proposed. The core objectives and constraints of the technical improvement are clarified, the key technical improvement details are refined, and the prototype of the improved control device is developed. Through performance verification experiments, compare and analyze the differences between improved technology and traditional technology from the dimensions of electrochemical performance, cycle stability, and process adaptability. The experimental results show that the improved precise control technology for injection volume can effectively improve the capacity consistency, cycle life, and rate performance of batteries, significantly enhancing their adaptability to different specifications of batteries and complex manufacturing environments. The research results of this article provide important technical support and theoretical reference for the optimization and upgrading of the injection process in the manufacturing of lithium-ion batteries.

关键词

核心工艺 / 锂离子电池 / 电化学性能 / 循环稳定性

Key words

core technology / Lithium ion battery / Electrochemical performance / cycle stability

引用本文

引用格式 ▾
戴树林. 锂离子电池注液量精准控制技术改进及其对电池性能的影响[J]. 工程设计与施工, 2026, 8(1): 13-15 DOI:10.12349/edc.v8i1.8966

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

杨子芊, 田雨来, 王雪婷, 戴一鸣, 刘彭薇, 沈朝烨, 张济明, 周志俊. 某锂电池企业生产线职业性有害因素调查[J]. 上海预防医学, 1-12.

[2]

任彦博, 韩龙飞. 锂电池生产企业火灾防控要点研究[J]. 工业安全与环保, 1-7.

[3]

毛冲, 杨海钊, 王霹霹, 杨梓颢, 刘全兵, 黄秋洁. 锂离子电池快充电解液研究进展[J]. 电源技术, 2025, 49(06): 1084-1099.

[4]

宋婉静, 张晓昱. 锂离子电池产业的成本与前景分析[J]. 电池, 2025, 55(01): 141-145.

[5]

杨彩凤. 锂离子电池化成分容工艺分析及设备能力提升[J]. 时代汽车, 2024,(24): 112-115.

AI Summary AI Mindmap
PDF (1123KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉