浅析现浇混凝土圆柱木模板施工技术

郭起轩 ,  孟令桐 ,  焦俊杰 ,  张启迪 ,  井启云

工程设计与施工 ›› 2026, Vol. 8 ›› Issue (10) : 29 -31.

PDF (3441KB)
工程设计与施工 ›› 2026, Vol. 8 ›› Issue (10) : 29 -31. DOI: 10.12349/edc.v8i10.12078

浅析现浇混凝土圆柱木模板施工技术

作者信息 +

Analysis of Construction Technology of Wood Formwork for Cast-in-Place Concrete Cylindrical Columns

Author information +
文章历史 +
PDF (3523K)

摘要

针对现浇混凝土圆柱施工中存在的涨模、漏浆、错台及通缝变形等质量通病,研究一种基于企口式木模板的圆柱成型技术。该技术采用18~22mm厚、3m高成品企口式圆柱木模板,配合钢带柱箍环向加固及方木背楞垂直度调整体系,通过上下错缝接高工艺适应超高圆柱施工需求。工程应用结果表明,该技术操作简便、组装效率高,能够有效规避圆柱施工常见质量缺陷,构件成型平整度、圆度均满足规范要求,且无需复杂修补工序,大幅节约人工与材料成本,经济效益显著,可为大型公共建筑同类圆柱施工工程提供可靠的技术参考与实践借鉴。

Abstract

This paper studies a cylinder forming technology based on tenon-joint wooden formworks to address common quality defects such as formwork bulging, slurry leakage, formwork dislocation and continuous joint deformation during the construction of cast-in-place concrete cylindrical columns. This technology adopts prefabricated tenon-joint wooden cylindrical formworks with a thickness of 18~22 mm and a height of 3 m. Combined with the circumferential reinforcement system of steel strip column hoops and the verticality adjustment system of square wood back ribs, it adopts the staggered joint heightening process to meet the construction requirements of super-high cylindrical columns. Engineering application results show that the technology features simple operation and high assembly efficiency. It can effectively avoid common quality defects in cylindrical column construction, and the flatness and roundness of formed components fully meet the specification requirements. Without complicated repair procedures, it greatly reduces labor and material costs with remarkable economic benefits, which can provide reliable technical reference and practical guidance for similar cylindrical column construction projects of large public buildings.

关键词

现浇混凝土圆柱 / 圆柱木模板 / 错缝接高 / 钢带柱箍 / 垂直度控制

Key words

cast-in-place concrete cylindrical columns / cylindrical wood formwork / staggered-joint height-splicing / steel-band column hoops / verticality control

引用本文

引用格式 ▾
郭起轩,孟令桐,焦俊杰,张启迪,井启云. 浅析现浇混凝土圆柱木模板施工技术[J]. 工程设计与施工, 2026, 8(10): 29-31 DOI:10.12349/edc.v8i10.12078

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

GB 50204-2015 混凝土结构工程施工质量验收规范[S]. 北京: 中国建筑工业出版社, 2015.

[2]

GB 50666-2011 混凝土结构工程施工规范[S]. 北京: 中国建筑工业出版社, 2011.

[3]

GB 55008-2021 混凝土结构通用规范[S]. 北京: 中国建筑工业出版社, 2021.

[4]

JGJ/T 130-2019 建筑施工扣件式钢管脚手架安全技术标准[S]. 北京: 中国建筑工业出版社, 2019.

[5]

JGJ 162-2008 建筑施工模板安全技术规范[S]. 北京: 中国建筑工业出版社, 2008.

AI Summary AI Mindmap
PDF (3441KB)

4

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉