测井辅助短节常见故障诊断与维修技术

刘红旗 ,  霍常青 ,  赵秋力 ,  孟繁宇 ,  李振兴

工程设计与施工 ›› 2026, Vol. 8 ›› Issue (3) : 45 -47.

PDF (1160KB)
工程设计与施工 ›› 2026, Vol. 8 ›› Issue (3) : 45 -47. DOI: 10.12349/edc.v8i3.9828

测井辅助短节常见故障诊断与维修技术

作者信息 +

Common Fault Diagnosis and Maintenance Technology of Logging Auxiliary Short Sections

Author information +
文章历史 +
PDF (1187K)

摘要

电缆大满贯测井辅助短节(柔性短节、张力短节、防转短节等)属于井下电缆测井仪器串的重要连接和功能调节单元,其可靠性关乎电缆大满贯测井作业数据采集的质量以及施工效率。依据2024年度某油田电缆大满贯测井配套辅助短节现场故障统计,整理出机械疲劳失效、载荷信号传输异常、机械密封劣化、环境适应性衰退这四种典型故障的诊断逻辑及维修技术路径。对柔性短节弯曲疲劳故障,用弯曲刚度测试和疲劳裂纹检测的方法;张力短节传感器异常诊断用动态载荷标定和信号响应校验的方法;机械密封失效判断用氦质谱检漏和压力衰减曲线拟合的方法;环境适应性故障复现用高温高压循环试验平台进行工况模拟。从维修工艺上来说,机械结构修复执行相关行业标准,张力传感器校准采用多点线性拟合补偿算法,高压密封修复使用金属-弹性体复合密封结构,系统测试包含弯曲性能、信号传输、振动冲击这三个可靠性验证指标。

Abstract

Cable logging auxiliary short sections (such as flexible short sections, tension short sections, and anti-rotation short sections) are important connection and functional adjustment units in downhole cable logging instrument strings. Their reliability is crucial to the quality of data acquisition and construction efficiency in cable logging operations with large cable runs. Based on the on-site fault statistics of auxiliary short sections for cable logging with large cable runs in a certain oilfield in 2024, this paper summarizes the diagnostic logic and maintenance technology paths for four typical faults: mechanical fatigue failure, load signal transmission anomalies, mechanical seal degradation, and environmental adaptability decline. For bending fatigue faults in flexible short sections, methods such as bending stiffness testing and fatigue crack detection are used; for sensor anomalies in tension short sections, dynamic load calibration and signal response verification methods are employed; for mechanical seal failure judgment, helium mass spectrometry leak detection and pressure decay curve fitting methods are applied; and for environmental adaptability fault reproduction, a high-temperature and high-pressure cyclic test platform is used for condition simulation. In terms of maintenance processes, mechanical structure repairs follow relevant industry standards; tension sensor calibration adopts a multi-point linear fitting compensation algorithm; high-pressure seal repairs use a metal-elastomer composite seal structure; and system testing includes three reliability verification indicators: bending performance, signal transmission, and vibration impact.

关键词

电缆大满贯测井 / 辅助短节 / 张力短节 / 维修工艺

Key words

Cable Logging with Large Cable Runs / Auxiliary Short Section / Fault Diagnosis / Flexible Short Section

引用本文

引用格式 ▾
刘红旗,霍常青,赵秋力,孟繁宇,李振兴. 测井辅助短节常见故障诊断与维修技术[J]. 工程设计与施工, 2026, 8(3): 45-47 DOI:10.12349/edc.v8i3.9828

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

叶高, 杨居朋, 梁小兵, 范修伟, 李自成. 油田测井无刷直流电机逆变器短路故障诊断及容错控制[J]. 微电机, 2025, 58(5): 33-38.

[2]

曲春雨, 马梓晋. 测井绞车刹车结构故障分析与优化设计[J]. 石油管材与仪器, 2025, 11(3): 103-108.

[3]

燕欢庆, 黄宇. 电缆测井井下张力随深度增加张力减小的故障研究[J]. 化工管理, 2025(15): 155-157+172.

[4]

李辉, 陆永钢, 刘得军, 郝振华. 基于故障相关性的随钻方位电磁波测井仪器可靠性失效建模研究[J]. 地球物理学报, 2025, 68(2): 759-767.

[5]

韩建, 陈着, 王业统, 曹志民, 邓宇. 基于RGCVAE的测井曲线重构方法[J]. 工业仪表与自动化装置, 2025(5): 87-91.

AI Summary AI Mindmap
PDF (1160KB)

0

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉