涂料生产车间排风系统精细化设计与工程实践
Refined Design and Engineering Practice of Exhaust System in Coating Production Workshop
本文基于工业通风工程原理,针对涂料生产过程中的污染物特性,提出了一套系统化的排风系统精细化设计方法。通过建立污染物散发模型,采用质量平衡法计算车间排风量,与传统的换气次数法相比较。重点研究了基于"四象限法"的排风系统划分策略,以及包含管网平衡计算、管道标准化设计和防爆安全措施的完整排风系统设计方案。工程实践表明,该设计方法能够实现排风系统的精准化配置,在保证污染物有效控制的前提下,显著降低系统初投资和运行能耗。
Based on industrial ventilation engineering principles and the pollutant characteristics in paint production processes, this study proposes a systematic refined design methodology for exhaust ventilation systems. By establishing pollutant dispersion models and employing mass balance methods to calculate workshop exhaust volumes, the study compares these approaches with traditional air change rate methods. The research focuses on exhaust system zoning strategies utilizing the “Four Quadrant Method,” along with comprehensive design solutions incorporating pipeline network balance calculations, standardized duct design, and explosion-proof safety measures. Engineering practice demonstrates that this design approach enables precise exhaust system configuration, significantly reducing initial investment costs and operational energy consumption while ensuring effective pollutant control.
| [1] |
GB50019-2015,工业建筑供暖通风与空气调节设计规范[S]. |
| [2] |
GB50058-2014,爆炸危险环境电力装置设计规范[S]. |
| [3] |
孙一坚. 工业通风(第四版)[M]. 北京: 中国建筑工业出版社, 2010. |
| [4] |
李强. 工业通风系统优化设计理论与方法[M]. 北京: 科学出版社, 2019. |
| [5] |
美国供热制冷空调工程师学会. ASHRAE Handbook-HVAC Applications[M]. 2021. |
| [6] |
王建军. 防爆通风系统设计要点分析[J]. 安全与环境工程, 2021, 28(3): 112-116. |
| [7] |
National Fire Protection Association. NFPA 68:Standard on Explosion Protection by Deflagration Venting[S]. 2018. |
/
| 〈 |
|
〉 |