凝汽器管板焊接质量控制要点

陈俊

工程设计与施工 ›› 2026, Vol. 8 ›› Issue (7) : 40 -42.

PDF (1099KB)
工程设计与施工 ›› 2026, Vol. 8 ›› Issue (7) : 40 -42. DOI: 10.12349/edc.v8i7.11043

凝汽器管板焊接质量控制要点

作者信息 +

Key Points for Quality Control of Condenser Tube Sheet Welding

Author information +
文章历史 +
PDF (1125K)

摘要

凝汽器是火力、核电发电机组重要的换热承压设备,管板与换热薄壁管材的密封角接焊缝,直接决定设备真空度与防渗漏能力。凝汽器管板多采用碳钢+不锈钢复合金属材料,换热管排布密集、管壁薄、焊接拘束应力大,施工中极易出现气孔、未熔合、裂纹、焊接变形等典型焊接缺陷。为保障机组安全稳定运行,本文从焊前准备、焊接过程工艺管控、常见缺陷成因防治、焊后无损检测与规范返修四个方面,系统阐述凝汽器管板全流程焊接质量控制核心措施,可为电厂凝汽器制造安装与检修焊接提供工程实践参考。

Abstract

The condenser is an important heat exchange and pressure-bearing equipment for thermal power and nuclear power generating units. The sealing fillet welds between the tube plate and the thin-walled heat exchange tubes directly determine the vacuum degree and leak prevention capability of the equipment. The tube plates of condensers are mostly made of carbon steel and stainless steel composite materials. The heat exchange tubes are densely arranged, with thin walls and large welding restraint stress. During construction, typical welding defects such as pores, incomplete fusion, cracks, and welding deformation are prone to occur. To ensure the safe and stable operation of the unit, this paper systematically elaborates on the core measures for the entire process of condenser tube plate welding quality control from aspects of pre-welding preparation, process control during welding, prevention of common defect causes, post-weld non-destructive testing, and standard rework. These measures can provide engineering practice references for the manufacturing, installation, and maintenance welding of condensers in power plants.

关键词

凝汽器 / 管板焊接 / 氩弧焊 / 密封焊 / 金属缺陷 / 质量控制

Key words

condenser / tube plate welding / argon arc welding / sealing welding / metal defects / quality control

引用本文

引用格式 ▾
陈俊. 凝汽器管板焊接质量控制要点[J]. 工程设计与施工, 2026, 8(7): 40-42 DOI:10.12349/edc.v8i7.11043

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

DL/T 1097-2023,火力发电厂凝汽器管板焊接技术规程[S]. 北京: 中国电力出版社, 2023.

[2]

王超. 电站换热器复合管板氩弧焊焊接缺陷控制研究[J]. 焊接技术, 2022.

[3]

李刚. 薄壁不锈钢换热管与管板密封焊工艺优化[J]. 金属加工热焊, 2023.

AI Summary AI Mindmap
PDF (1099KB)

5

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉