PDF (1152K)
摘要
许多矿产资源分布在山区,导致矿山的各种主要设施布置在山上,建设较困难、经济成本较高,尽量减少建设期间所占区域。在矿山工程安装期间,而作为矿井地面的核心支撑结构、用于固定天轮、罐道及卸载曲轨、同时承受全部提升载荷的井架,位于井口附近,所属位置海拔标高较高。特别是建设在山顶的大型永久井架,周围多数是悬崖和建筑物,井架的组装场地受到制约;对于井架吊装所需用的各种大型吊车选择受到限制,山区交通运输不便,有的地方大型吊车进不去,导致井架的吊装受到一定的限制。
Abstract
Many mineral resources are located in mountainous areas, necessitating the placement of major mining facilities on mountainsides- a practice that poses significant construction challenges and high economic costs, requiring minimal land occupation during installation. The derrick, serving as the core support structure for the mine surface, is used to secure the hoist drum, gangway, and unloading curve rails while bearing all lifting loads; it is situated near the mine entrance at a relatively high elevation. Particularly for large permanent derricks constructed on mountaintops, the surrounding terrain consists largely of cliffs and buildings, restricting assembly sites. Additionally, the selection of appropriate large cranes for derrick installation is limited due to poor transportation conditions in mountainous regions, with some areas being inaccessible to heavy machinery, thereby imposing constraints on derrick hoisting operations.
关键词
Key words
[Author(id=1330198340885623264, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330198340050956758, orderNo=0, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330198340944343522, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330198340050956758, authorId=1330198340885623264, language=EN, stringName=Dongfeng Xu, firstName=Dongfeng, middleName=null, lastName=Xu, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=Jiangsu Provincial Mining Engineering Group Co., Ltd., Xuzhou, Jiangsu, 221000, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330198340990480867, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330198340050956758, authorId=1330198340885623264, language=CN, stringName=徐东风, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=江苏省矿业工程集团有限公司, 中国·江苏 徐州 221000, bio={"content":"徐东风(1987-),男,中国江苏邳州人,本科,工程师,从事施工工艺研究。
"}, bioImg=null, bioContent=徐东风(1987-),男,中国江苏邳州人,本科,工程师,从事施工工艺研究。
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330198340814320091, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330198340050956758, xref=null, ext=[AuthorCompanyExt(id=1330198340826903005, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330198340050956758, companyId=1330198340814320091, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=Jiangsu Provincial Mining Engineering Group Co., Ltd., Xuzhou, Jiangsu, 221000, China), AuthorCompanyExt(id=1330198340843680222, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330198340050956758, companyId=1330198340814320091, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=江苏省矿业工程集团有限公司, 中国·江苏 徐州 221000)])])]
徐东风.
崖边受限空间大型井架安装新工艺技术研究与应用[J].
工程设计与施工, 2026, 8(7): 70-72 DOI:10.12349/edc.v8i7.11053
| [1] |
汪志浩. 一种辅助钢结构井架大翻转法竖立创新工艺研究[J]. 机电信息, 2024, (11): 89-92.
|
| [2] |
张红旗. 箱型井架分段组装和空中对接吊装工艺[J]. 江西煤炭科技, 2010(4): 48-49.
|
| [3] |
岳广义. 矿山箱型钢井架起立安装技术研究与应用[J]. 中国煤炭, 2014, 40(1): 82-84.
|
| [4] |
卢倩, 朱真才, 文红, 瞿超, 钮磊. 大型钢结构井架起吊过程中钢丝绳的力学分析[J]. 矿山机械, 2008, 36(3): 46-50.
|