PDF (1244K)
摘要
废热回收在当今工业生产过程中已成为提升能源利用率、降低碳排放的主要方式之一。印刷电路板由于工艺制造需求,属于一种高能耗产业,工艺设备需排除大量的废气,为保持生产车间温湿度及微正压要求,需同时补充大量的新风。与此同时动力系统(如空压机、热压机)产生大量的废热,都需要通过冷却塔直接排放到室外大气中,造成严重的能源浪费,还加剧了厂区周边的热岛效应。同时工艺设备生产又需要大量的热量,厂区需要配置稳定的热源,如果废热能够实现循环利用,将能最大程度的为业主节省一部分运行成本。本文以泰国某PCB厂房为例,深入分析如何利用空压机及热压机的废热解决冬季洁净室加湿热负荷需求。以及通过“能源梯级利用”实现废热最大利用效率。
Abstract
Recovering waste heat has emerged as a key strategy for enhancing energy efficiency and mitigating carbon emissions across modern industrial operations. Printed circuit board (PCB) manufacturing-driven by stringent quality and environmental control standards-is inherently energy-intensive, generating substantial exhaust air streams from its processing machinery. To sustain precise temperature, humidity, and slight positive pressure conditions within cleanrooms, large volumes of conditioned outdoor air must be introduced continuously. Concurrently, auxiliary systems-including air compressors and hot pressing units-generate considerable low-grade thermal energy, most of which is conventionally dissipated into the ambient environment via cooling towers. This practice not only represents a major loss of recoverable energy but also contributes to localized thermal pollution, intensifying the urban heat island phenomenon near the facility. Moreover, the production process itself demands a consistent supply of thermal energy-particularly for humidification during colder months. Harnessing this otherwise wasted thermal output could substantially lower operational expenditures. Using a real-world PCB manufacturing plant in Thailand as a case study, this paper investigates the feasibility of repurposing waste heat from air compressors and hot presses to fulfill cleanroom humidification requirements in winter, while advancing the concept of “energy cascading”-a systematic approach that prioritizes sequential, high-value utilization of thermal energy across multiple applications.
关键词
Key words
[Author(id=1330185198735200714, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185197938282945, orderNo=0, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330185198789726668, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185197938282945, authorId=1330185198735200714, language=EN, stringName=Hongting Zhou, firstName=Hongting, middleName=null, lastName=Zhou, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=Aoyi Architectural Engineering Design Co., Ltd., Shenzhen, Guangdong, 518000, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330185198835864013, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185197938282945, authorId=1330185198735200714, language=CN, stringName=周红婷, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=奥意建筑工程设计有限公司, 中国·广东 深圳 518000, bio={"content":"周红婷(1988-),女,中国江西萍乡人,本科,中级,从事暖通设计研究。
"}, bioImg=null, bioContent=周红婷(1988-),女,中国江西萍乡人,本科,中级,从事暖通设计研究。
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330185198668091846, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185197938282945, xref=null, ext=[AuthorCompanyExt(id=1330185198680674759, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185197938282945, companyId=1330185198668091846, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=Aoyi Architectural Engineering Design Co., Ltd., Shenzhen, Guangdong, 518000, China), AuthorCompanyExt(id=1330185198693257672, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185197938282945, companyId=1330185198668091846, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=奥意建筑工程设计有限公司, 中国·广东 深圳 518000)])])]
周红婷.
泰国某PCB厂房余热回收系统的设计与应用[J].
工程设计与施工, 2026, 8(8): 10-12 DOI:10.12349/edc.v8i8.11438
| [2] |
王志军, 殷小涛, 印制电路板厂房暖通空调节能设计分析[J]. 清洁生产与环保, 2020(4): 49-52
|
| [3] |
许校彬, 邵勇, 陈金星, 等. 印制电路板制造中节能改造技术探索与实践[J]. 印制电路信息, 2022, 30(9): 56-60
|