PDF (1371K)
摘要
带式输送机纵向撕裂是选煤厂破坏性最强的故障之一,一旦发生将造成巨大损失。针对原有保护装置范围不全面、可靠性差易误动作,以及溜槽结构缺陷导致卡阻等问题,本文以原煤车间带式输送机为对象,实施三项改进:垂杆锁销改棘轮锁销;机头卸载和中部拉紧改向滚筒后段加装拦索检测;转载点溜槽防卡阻改造。改造后实现机头到尾全覆盖,有效避免了多起潜在撕裂事故的扩大,同时误动作次数降幅达80%,有效提升了防撕裂装置的可靠性,可为同类型输送机防撕裂保护升级提供参考。
Abstract
The longitudinal tearing of belt conveyors is one of the most destructive faults in coal preparation plants, and its occurrence will cause huge losses. In response to the shortcomings of the original protection devices, such as incomplete coverage and poor reliability with prone to false actions, as well as the structural defects of the chute causing blockages, this paper takes the belt conveyor in the raw coal workshop as the object and implements three improvements: replacing the vertical rod lock pin with a ratchet lock pin; replacing the head unloading and middle tensioning with a reversing drum and adding a rope barrier detection at the rear section of the reversing drum; and modifying the chute at the transfer point to prevent blockages. After the transformation, the protection is fully implemented from the head to the tail, effectively avoiding the expansion of multiple potential tearing accidents, and reducing the number of false actions by 80%, effectively improving the reliability of the anti-tearing device, and can provide a reference for the upgrade of anti-tearing protection for similar conveyors.
关键词
Key words
[Author(id=1330185197706883871, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, orderNo=0, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330185197773992737, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, authorId=1330185197706883871, language=EN, stringName=Yongqiang Sun, firstName=Yongqiang, middleName=null, lastName=Sun, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=Coal Preparation Plant of Guoneng Jizeng Group Co., Ltd., Ordos, Inner Mongolia, 010300, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330185197824324386, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, authorId=1330185197706883871, language=CN, stringName=孙永强, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=国能准能集团有限责任公司 选煤厂, 中国·内蒙古 鄂尔多斯 010300, bio={"content":"孙永强(1989-),男,中国内蒙古赤峰人,本科,工程师,从事矿山机械装备维修研究。
"}, bioImg=null, bioContent=孙永强(1989-),男,中国内蒙古赤峰人,本科,工程师,从事矿山机械装备维修研究。
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330185197622997787, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, xref=null, ext=[AuthorCompanyExt(id=1330185197639775004, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, companyId=1330185197622997787, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=Coal Preparation Plant of Guoneng Jizeng Group Co., Ltd., Ordos, Inner Mongolia, 010300, China), AuthorCompanyExt(id=1330185197656552221, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, companyId=1330185197622997787, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=国能准能集团有限责任公司 选煤厂, 中国·内蒙古 鄂尔多斯 010300)])]), Author(id=1330185197870461732, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, orderNo=1, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330185197929181990, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, authorId=1330185197870461732, language=EN, stringName=Jinyu Liu, firstName=Jinyu, middleName=null, lastName=Liu, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=Coal Preparation Plant of Guoneng Jizeng Group Co., Ltd., Ordos, Inner Mongolia, 010300, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330185197975319335, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, authorId=1330185197870461732, language=CN, stringName=刘金宇, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=国能准能集团有限责任公司 选煤厂, 中国·内蒙古 鄂尔多斯 010300, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330185197622997787, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, xref=null, ext=[AuthorCompanyExt(id=1330185197639775004, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, companyId=1330185197622997787, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=Coal Preparation Plant of Guoneng Jizeng Group Co., Ltd., Ordos, Inner Mongolia, 010300, China), AuthorCompanyExt(id=1330185197656552221, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185196876411671, companyId=1330185197622997787, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=国能准能集团有限责任公司 选煤厂, 中国·内蒙古 鄂尔多斯 010300)])])]
孙永强,刘金宇.
降低选煤厂原煤带式输送机纵向撕裂次数的研究与应用[J].
工程设计与施工, 2026, 8(8): 47-49 DOI:10.12349/edc.v8i8.11449
| [1] |
税文强, 刘华新. 带式输送机纵撕保护装置的研究现状[J]. 煤矿机电, 2024, 45(6): 68-70+74.
|
| [2] |
申永文. 选煤厂带式输送机输送带纵撕浅析[J]. 电子制作, 2014,(13): 230-231.
|
| [3] |
李燕. 新型“T”型纵撕保护装置的设计与应用研究[J]. 机械管理开发, 2025(7): 157-159.
|
| [4] |
樊虎林. 胶带机尾部溜槽落料缓冲结构的优化设计[J]. 机械管理开发, 2021, 36(7): 32-33.
|