PDF (1229K)
摘要
针对某路K1+120至K3+760段软土地基含水量高、压缩性强、承载力低等问题,提出水泥、粉煤灰与本地黏土复合填料分层填筑施工质量控制方法。通过控制拌合均匀性、含水率、松铺厚度、碾压遍数及沉降监测反馈,形成施工全过程质量管控体系。工程检测结果表明,复合填料全段平均压实度为96.0%,最小压实度为95.0%,承载力特征值达到180 kPa,均满足设计要求;6个月工后累计沉降量为18.6 mm至29.4 mm,未超过30 mm控制限值。研究表明,该复合填料填筑工艺可有效提升软土地基路基填筑质量,并兼具施工效率和经济性优势。
Abstract
To address issues such as high moisture content, strong compressibility, and low bearing capacity in the soft soil foundation along the section K1+120 to K3+760 of a road, a quality control method for layered filling construction using a composite filler consisting of cement, fly ash, and local clay was proposed. By controlling mixing uniformity, moisture content, loose laying thickness, compaction passes, and settlement monitoring data, a comprehensive quality control system throughout the construction process was established. Engineering test results indicate that the average compaction degree of the composite filler across the entire section is 96.0%, with a minimum compaction degree of 95.0%; the characteristic bearing capacity value reaches 180 kPa, both meeting design requirements; the cumulative settlement over six months ranges from 18.6 mm to 29.4 mm, not exceeding the 30 mm control limit. The study demonstrates that this composite filler filling technique effectively enhances the quality of subgrade construction in soft soil foundations while offering advantages in construction efficiency and cost-effectiveness.
关键词
Key words
[Author(id=1330185203381768648, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185202572267945, orderNo=0, firstName=null, middleName=null, lastName=null, nameCn=null, orcid=null, stid=null, country=null, authorPic=null, dead=0, email=null, emailSecond=null, emailThird=null, correspondingAuthor=0, authorType=1, ext={EN=AuthorExt(id=1330185203448877517, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185202572267945, authorId=1330185203381768648, language=EN, stringName=Lingjun Feng, firstName=Lingjun, middleName=null, lastName=Feng, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=Ji’an Yinluling Construction Engineering Co., Ltd., Ji’an, Jiangxi, 343006, China, bio=null, bioImg=null, bioContent=null, aboutCorrespAuthor=null), CN=AuthorExt(id=1330185203499209168, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185202572267945, authorId=1330185203381768648, language=CN, stringName=冯令军, firstName=null, middleName=null, lastName=null, prefix=null, suffix=null, authorComment=null, nameInitials=null, affiliation=null, department=null, xref=null, address=吉安市银庐陵建筑工程有限公司, 中国·江西 吉安 343006, bio={"content":"冯令军(1990-),中国江西吉安人,本科,工程师,从事道路桥梁研究。
"}, bioImg=null, bioContent=冯令军(1990-),中国江西吉安人,本科,工程师,从事道路桥梁研究。
, aboutCorrespAuthor=null)}, companyList=[AuthorCompany(id=1330185203302076866, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185202572267945, xref=null, ext=[AuthorCompanyExt(id=1330185203318854084, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185202572267945, companyId=1330185203302076866, language=EN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=Ji’an Yinluling Construction Engineering Co., Ltd., Ji’an, Jiangxi, 343006, China), AuthorCompanyExt(id=1330185203331436997, tenantId=1045748351789510663, journalId=1327662952484470822, articleId=1330185202572267945, companyId=1330185203302076866, language=CN, country=null, province=null, city=null, postcode=null, companyName=null, departmentName=null, remark=吉安市银庐陵建筑工程有限公司, 中国·江西 吉安 343006)])])]
冯令军.
市政道路软土地基复合填料填筑施工质量控制要点[J].
工程设计与施工, 2026, 8(8): 61-63 DOI:10.12349/edc.v8i8.11453
| [1] |
黄红军, 邓树密, 黄方麒. 浅谈高填方路基冲击碾压补强技术的应用和质量控制要点[J]. 四川建筑, 2024, 44(06): 212-214.
|
| [2] |
李达. 在役桥梁盆式支座更换施工监理质量控制要点[J]. 江苏建筑, 2024,(06): 76-79.
|
| [3] |
高彦辉, 蔡廷江. 水泥稳定碎石层施工质量控制[J]. 安装, 2024, (S2): 211-213.
|