高速公路桥梁工程施工中盖梁装配式施工工艺探索
Research on Prefabricated Construction Technology of Capping Beam in Expressway Bridge Engineering
盖梁是高速公路桥梁下部结构的重要受力构件,施工质量及能力对整个桥梁工程有较大影响。传统现浇施工工艺存在施工周期长、现场作业量大、环境影响大、安全风险高等固有缺陷,不能满足现代高速公路建设工业化建造、绿色施工的要求。本文对盖梁装配式施工工艺实行了系统的说明,系统地介绍了装配式盖梁施工工艺的工艺原理以及技术特点,装配式盖梁施工工艺借助构件工厂化预制和现场快速装配,在保证结构质量的时候大大缩短了下部结构施工周期,减少了高空作业的安全风险,减少了施工环境的干扰,在常规桥梁及改扩建工程中有着广阔的推广应用前景。该工艺的更深一步发展要靠着高精度连接技术的不断改进和繁复地形条件下施工装备的配套能力的增加。
As a critical load-bearing component of the substructure of highway bridges, the construction quality and efficiency of the bent cap have a significant impact on the overall bridge project. Traditional cast-in-place construction methods are characterized by inherent limitations including prolonged construction periods, substantial on-site workloads, notable environmental impacts, and elevated safety risks, rendering them inadequate to fully meet the requirements of modern highway construction for industrialized fabrication and green construction practices. This paper focuses on the prefabricated assembly construction technique for bent caps, systematically elaborating on its process principles and technical characteristics. The prefabricated assembly construction technique for bent caps, through factory-based prefabrication of components and rapid on-site assembly, can significantly shorten the construction period of substructures, reduce safety risks associated with elevated operations, and minimize construction-related environmental disturbances, all while ensuring structural quality. It demonstrates broad prospects for promotion and application in conventional bridge projects as well as reconstruction and expansion works. Further development of this technique relies on the continuous optimization of high-precision connection technologies and the enhancement of construction equipment supporting capabilities under complex terrain conditions.
| [1] |
刘小丹. 高架桥梁立柱及盖梁装配施工技术探析[J]. 江西建材, 2024(5): 234-238. |
| [2] |
贾亚楠. 重丘区装配式桥梁盖梁施工技术[J]. 交通世界, 2025(26). |
| [3] |
城市公路高架桥预制立柱、盖梁施工精度控制[C]// 工程技术与新能源经济学术研讨会论文集(三), 2025. |
| [4] |
斯振兴. 装配式盖梁预制拼装成套技术研究[J]. 城市建设理论研究(电子版), 2025(10). |
| [5] |
马起柱. 市政高架桥梁桥墩立柱和盖梁装配式施工技术探讨[J]. 四川水泥, 2023(1). |
/
| 〈 |
|
〉 |