电子电器产品能效检测设备校准方法及要求

马新华

信息科学与工程研究 ›› 2026, Vol. 7 ›› Issue (6) : 22 -24.

PDF (1177KB)
信息科学与工程研究 ›› 2026, Vol. 7 ›› Issue (6) : 22 -24. DOI: 10.12349/iser.v7i6.10788

电子电器产品能效检测设备校准方法及要求

作者信息 +

Calibration Methods and Requirements for Energy Efficiency Testing Equipment of Electronic and Electrical Products

Author information +
文章历史 +
PDF (1204K)

摘要

在全球节能减排政策持续推进、电子电器产品能效标准不断升级的背景下,能效检测数据的准确性直接关系到产品能效等级评定、市场准入及行业合规发展.能效检测设备作为数据采集的核心工具,其计量性能是否达标、校准工作是否规范,是保障检测结果精准可靠的关键前提.本文围绕电子电器产品能效检测设备校准工作,系统梳理校准的核心意义,剖析常用能效检测设备的校准原理与适用方法,明确校准技术要求、流程规范与质量控制要点,结合实际校准案例验证校准方法的有效性,同时指出当前校准工作存在的问题并提出优化建议,旨在为电子电器能效检测机构、生产企业提供科学、规范的校准技术参考,提升能效检测数据的可靠性与可比性.

Abstract

Against the backdrop of ongoing global energy conservation and emission reduction policies and continuously upgraded energy efficiency standards for electronic and electrical products, the accuracy of energy efficiency testing data directly impacts product energy efficiency rating assessments, market access, and industry compliance. As the core tool for data acquisition, the metrological performance compliance and standardized calibration practices of energy efficiency testing equipment are critical prerequisites for ensuring precise and reliable test results. This paper systematically examines the significance of calibration for energy efficiency testing equipment, analyzes the calibration principles and applicable methods for common testing devices, clarifies technical requirements, procedural standards, and quality control 要点 , validates calibration methodologies through practical case studies, identifies current challenges in calibration practices, and proposes optimization recommendations. The aim is to provide scientific and standardized calibration guidelines for energy efficiency testing institutions and manufacturers, thereby enhancing the reliability and comparability of testing data.

关键词

电子电器产品 / 能效检测 / 检测设备 / 校准方法 / 技术要求

Key words

electronic and electrical products / energy efficiency testing / testing equipment / calibration methods / technical requirements

引用本文

引用格式 ▾
马新华. 电子电器产品能效检测设备校准方法及要求[J]. 信息科学与工程研究, 2026, 7(6): 22-24 DOI:10.12349/iser.v7i6.10788

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

国家市场监督管理总局. 能源效率标识管理办法[S]. 2016.

[2]

JJF 1261-2018,家用和类似用途电器能效测试装置校准规范[S]. 北京: 中国计量出版社, 2018.

[3]

GB 21455-2019,房间空气调节器能效限定值及能效等级[S]. 北京: 中国标准出版社, 2019.

[4]

IEC 62301,Household electrical appliances - Test method for energy consumption of standby mode[S].2019.

[5]

张宏, 李丽. 电子电器能效检测设备计量校准技术研究[J]. 计量与测试技术, 2022, 49(07): 89-91.

[6]

王健. 家电能效检测系统校准难点及解决方案[J]. 中国计量, 2021(11): 102-103.

AI Summary AI Mindmap
PDF (1177KB)

4

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉