一种射频光接收自动增益控制(AGC)模块设计与实现

刘文魁 ,  杨兴念

信息科学与工程研究 ›› 2026, Vol. 7 ›› Issue (8) : 24 -27.

PDF (1328KB)
信息科学与工程研究 ›› 2026, Vol. 7 ›› Issue (8) : 24 -27. DOI: 10.12349/iser.v7i8.11563

一种射频光接收自动增益控制(AGC)模块设计与实现

作者信息 +

Design and Implementation of an Automatic Gain Control(AGC) Module for Radio Frequency Optical Receivers

Author information +
文章历史 +
PDF (1359K)

摘要

随着微波光学技术的突飞猛进,接收端信号稳定行成为制约系统性能的关键.为解决在较宽的动态范围输入信号的系统中可能导致的接收机输出信号增益失配问题,本文研究并设计了一种高性能宽动态射频光接收自动增益控制(AGC)电路实现方法.本设计选用AD836X芯片开展设计工作,射频接收端匹配具备高线性度的光电探测器模组.经理论计算及测试结果证实了所设计AGC模块在-40dBm至-10dBm的大范围输入下能输出+16dBm的稳定信号,并具有较低的输出信噪比以及较快的跟踪速度.本文采用改进环路滤波电路和PCB射频走线的设计方案对系统进行优化,提高了其稳定性和可靠性.提升产品可靠性,为精密射频光电接收机提供可靠的方案支撑.

Abstract

With the rapid advancement of microwave optical technology, signal stability at the receiver end has become a critical factor limiting system performance. To address potential gain mismatch issues in receiver output signals within systems operating with wide dynamic range input signals, this paper investigates and designs a high-performance automatic gain control(AGC) circuit for wide-dynamic-range RF optical receivers. The design employs the AD836X chip and integrates an optoelectronic detector module with high linearity at the RF reception stage. Both theoretical calculations and experimental results confirm that the designed AGC module delivers a stable output signal of +16 dBm across a broad input range from-40 dBm to-10 dBm, while maintaining low output signal-to-noise ratios and rapid tracking response times. The system was optimized using improved loop filtering circuits and PCB RF trace configurations, enhancing overall stability and reliability. This work significantly improves product reliability and provides a robust solution for precision RF optoelectronic receivers.

关键词

射频 / 光接收组件 / 自动增益控制 / 信号完整性

Key words

radio frequency / optical receiving component / automatic gain control / signal integrity

引用本文

引用格式 ▾
刘文魁,杨兴念. 一种射频光接收自动增益控制(AGC)模块设计与实现[J]. 信息科学与工程研究, 2026, 7(8): 24-27 DOI:10.12349/iser.v7i8.11563

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1]

王茂旭, 汤振华, 于优, 等. 一种新型自封焊小型化光电探测模块[J]. 半导体光电, 2024, 45(3): 401-405.

[2]

李金, 杨洪, 孙晨, 等. 1920×1080元高灵敏行间转移CCD图像传感器[J]. 半导体光电, 2025, 46(1): 10-15.

[3]

曹庆珊, 郑吴家锐, 李硕, 等. 基于0.18 μm SiGe BiCMOS工艺的25 Gb/s宽带可变增益放大器[J]. 半导体光电, 2021, 42(6): 799-802, 808.

[4]

陈哲. 一种基于90 nm SiGe BiCMOS工艺的4×112 Gbit/s PAM-4跨阻放大器[J]. 微电子学, 2023, 53(2): 215-220.

[5]

张春茗, 王浩, 宋茹雪. 80 Gbit/s PAM4光接收机低噪声模拟前端电路设计[J]. 微电子学, 2024, 54(2): 201-206.

AI Summary AI Mindmap
PDF (1328KB)

7

访问

0

被引

详细

导航
相关文章

AI思维导图

/

〈 〉